Franklin 526 QSG User Manual

FRANKLIN Mobile Hotspot R526 QSG

Thank you for choosing the Franklin R526.

Note.

- This manual briefly explains the preparation, installation process and safety

precautions for using R526 router.

- We recommend you read this manual before using the R526.

Table of Contents

Care and Maintenance------------------------------------------------ 2

Part 1. Getting to know the R526

1.1 Package Contents ----------------------------------------------- 3

1.2 Hardware Features of the R526------------------------------ 3

Part 2. Setting up the R526

2.1 Charging the battery-------------------------------------------- 3

2.2 Battery Tips ------------------------------------------------------ 4

2.3 Using a LAN cable------------------------------------------------5

Part 3. Using the R526

3.1 Connecting the R526--------------------------------------------5.

3.2 Opening the Browser Interface ----------------------------- 6

3.3 Device Activation (Windows)--------------------------------- 6

3.4 Device Activation (Mac users only)-------------------------- 7

Part 4. Technical Specifications, Regulatory and Safety Information,

Warranty, Trademarks & Copyright

----------------------------------------------------------------------------- 8

4.1 LED Overview --------------------------------------------------- 8

4.2 Technical Specification---------------------------------------- 9

4.3 Safe Information ----------------------------------------------- 9

4.4. Warranty -------------------------------------------------------- 9

4.5. Trademarks ----------------------------------------------------- 10

2

4.6 Copyright--------------------------------------------------------- 10

Care and Maintenance

It is normal for your wireless device to get warm when you use it.



Use your wireless device and accessories with care in clean environment.



Keep the wireless device away from open flame or dusty environments.



Protect your device and accessories from water and vapor and keep them dry.



Do not drop, throw or bend your device.



Clean your device with a piece of damp and soft antistatic cloth.



Do not use any chemical agents (such as alcohol and benzene), chemical

detergents or powder to clean the device.



Do not leave your device or accessories in significantly high or low

temperature environments.



Use only manufacturer approved accessories and parts.



Contact an authorized service center in regard to device or accessories

abnormality.



Do not dismantle or tamper with the device or accessories. Dismantling or

tampering will these items will void the product’s warranty.

Part 1. Getting to know the R526

1.1 Package Contents

- Franklin R526 Mobile Hotspot

- QSG (Quick Start Guide)

- USB Power Adapter

- Carrying Pouch

- Li-ion 1,350mAh battery

- RJ45 port cover

1.2 Hardware Features of the R526

Micro USB port

RJ45 LAN Port

Power button

3

Part 2. Setting up the R526

2.1 Charging the battery

1. The battery compartment is located on the bottom of the device.

Slide open the battery compartment door by firmly pressing in the direction of the

arrows.

2. Insert the battery by lining up the gold contact points on the battery with the gold

contact points in the battery compartment. Then press down gently until the

battery is seated.

3. Replace the battery cover and slide it closed while pressing gently until it locks

into place.

4. Connect the micro USB end of the USB Power Adapter to the micro USB port of

the device.

Air-vent

Factory Reset Button

4

Note

• You must have a fully charged battery the first time you use the R526.

• After the first use, you may use the device while it is connected to the AC adapter.

• When using battery power, the device lasts up to 3 hours (when connected to a

single device only).

• The battery will discharge more rapidly as additional devices access the R526.

2.2 Battery Tips

Warning

Use only Franklin Wireless approved batteries and chargers with your device.

Failure to use a Franklin W ireless approved battery and charger may increase the

risk that your device will overheat, catch fire, and/or explode resulting in property

damage, serious bodily injury, and/or death.

Battery life can vary based on the network, signal strength, temperature, features,

and accessories you use.



If you connect your device to your computer using a USB data cable, the battery

will charge.



It normally takes at least 3 hours to fully charge the battery with an A/C adapter.



New batteries or batteries stored for a long time may take more time to charge.



When charging your battery, keep it near room temperature.



Never expose batteries to temperatures below 32°F (0°C) or above 113°F (45°C).

Never leave the device in an unattended vehicle due to uncontrollable temperatures

that may be outside the recommended temperature range for this device.



It is normal for batteries to gradually weaken and require longer charging times. If

you notice a change in your battery life, it is probably time to purchase a new

battery.

2.3 Using a LAN cable (RJ45)

If you want to connect to RJ45 LAN cable to the R526, plug the cable to the RJ45 slot

located between Micro USB port and power button.