Franke Foodservice HDWSS202-FM-SV-LD User Manual
20"
(50cm)
3"
(
8cm)
21" (53cm)
12"
(30cm)
30"
(76cm)
10"
(25cm)
HDWSS202-FM-SV-LD shown
1
3 4
HDWSS2021-FM-□-□
Heavy Duty Wall Service Sink
Fixture Specification:
This Heavy Duty Wall Service Sink is designed for areas requiring the utmost
in vandal resistance. The fixture is fabricated from heavy 14 gauge type 304
8-10 stainless steel. It is seamlessly welded and polished to a satin finish.
1
Standard waste is a 2” Removable P-Trap.
Compartment Size: (FB x LR x D):
20" (51cm) x 21" (53cm) x 30" (76cm)
Bowl Size: (FB x LR x D):
16" (41cm) x 19" (48cm) x 10" (25cm)
The fixture is tested and certified to:
ASME A112.19.3-2008/CSA B45.4-08 standards.
Installation:
These fixtures are designed to be installed onto finished walls which are not
accessible from a pipe chase. Installation is achieved by means of a wall
hanger bracket and lower mounting holes. Mounting hardware and plumbing
are all self contained and only accessed by a removable panel. The panel is
secured with tamper resistant screws.
Available Controls:
The basin is controlled with an air-operated self closing valve with a non-hold
open feature. Flow time is adjustable from approximately 5 to 60 seconds
and has a flow rate of 2.2 gpm (8.3 lpm). The valve is operated by a vandal
resistant push button which requires less than 5lbs to operate. The valve
can be mounted up to 10 feet (3meters) away from the push button. Valve
conforms to the requirements of ASME A112.18.1-2005/CSA B125.1-05.
2
Kindred Commercial Printed in Canada
CANADA
Franke Kindred Canada Limited
1000 Franke Kindred Road, Midland, Ontario, Canada L4R 4K9
email info@franke.com www.kindred-commercial.com
Telephone 1-866-687-7465 Fax 1-800-361-8408
1110 61667
FIXTURE OVERVIEW:
Sink Spout
1
Push Button Actuator
2
2" Removable P-Trap
3
Removable Access Door (specify left or right)
4
Kindred Commercial Printed in Canada
1Please visit www.kindred-commercial.com for the latest specifications.
20"
(50cm)
3"
(
8cm)
21" (53cm)
12"
(30cm)
30"
(76cm)
10"
(25cm)
CHECK ONE BOX PER SECTION
11 1/2"
(29cm)
19"
(48cm)
27 1/8"
(69cm)
3 3/4"
(10cm)
7 1/2"
(19cm)
28"
(71cm)
Recommended
HDWSS2021-FM-□-□
Heavy Duty Wall Service Sink
Standard Project Specific Options
Basin Valve
Spout □ 2.2 gpm Spout
Waste Outlet □ 2" (5cm) Removable P-Trap
Installation
□ On Wall
Wall Hanger Bracket and lower mounting
holes (wall hardware supplied by others)
Removable Access Door
HDWSS2021-FM-□-□
Rough-in Information
□ - SV Single Temperature Air Operated
□ - DV Hot and Cold Air Operated
□ - LD Left Access Door
□ - RD Right Access Door
FINISHED FLOOR
APPROVED FOR MANUFACTURE
Customer:
Name and Title (print):
Signature:
Kindred Commercial Printed in Canada
The latest rough in information is supplied with each fixture. Do not rough in without first verifying dimensions. Franke Kindred Canada reserves the right to make design and specification changes without prior
notice. Franke Kindred Canada will not assume any responsibility for the use of obsolete data. Please visit www.kindred-commercial.com for the latest specifications.
CANADA
Franke Kindred Canada Limited
1000 Franke Kindred Road, Midland, Ontario, Canada L4R 4K9
email info@franke.com www.kindred-commercial.com
Telephone 1-866-687-7465 Fax 1-800-361-8408
2
Please visit www.kindred-commercial.com for the latest specifications.
Date:
Quantity:
Model:
Kindred Commercial Printed in Canada
1110 61667
Loading...