Franke Foodservice HDWC2414-RM-SP User Manual
14" (36cm)
24 1/8"
(61cm)
11 1/2"
(29cm)
15"
(38cm)
24 1/8" (61cm)
15"
(38cm)
HDWC2414-RM shown
HDWC2414-RM-□
Heavy Duty Water Closet
Fixture Specification:
This Heavy Duty Water Closet (Toilet) is designed for areas requiring the
utmost in vandal resistance. The fixture is fabricated from heavy 14 gauge
type 304 18-10 stainless steel. The elongated bowl is drawn and seamlessly
welded and polished to a satin finish. The toilet seat is polished to a sanitary
mirror finish. Internal piping is also 14 gauge type 304 stainless steel.
Toilet
Elongated design blow out jet bowl. The toilet requires a minimum of 35 PSI
flow pressure. The toilet was tested and certified as a low water consumption
toilet using only 1.6 gpf (6 lpf). The trap will pass a 2 1/8" ball and has a
seal of 3.5" min. The waste outlet extends a minimum of 3" behind the
fixture and has a plain end OD of 2 3/8". Flush valve connection is 1 1/2”
FIPT rear spud.
The entire fixture is tested and certified to:
ASME A112.19.2-2008/CSA B45.1-08 standards.
Installation:
These fixtures are designed to be installed onto finished walls which are
serviceable from a pipe chase. Installation is achieved by threading (5) 1/2”
(13mm) diameter threaded anchor rods to the back of the fixture. The
anchor rods are then secured on the chase side of the wall by means of the
supplied nuts and washers. (Standard included hardware is for walls up to 8"
(20cm) thick).
For existing walls, an optional metal cutout template is available. For new
block (CMU) or poured concrete walls, an optional wall sleeve is available.
Kindred Commercial Printed in Canada
CANADA
Franke Kindred Canada Limited
1000 Franke Kindred Road, Midland, Ontario, Canada L4R 4K9
email info@franke.com www.kindred-commercial.com
Telephone 1-866-687-7465 Fax 1-800-361-8408
1110 61667
1
FIXTURE OVERVIEW:
1 1/2" FIPT Flush Connection
1
2
2 3/8" OD Plain End Waste Connection
2
Kindred Commercial Printed in Canada
1Please visit www.kindred-commercial.com for the latest specifications.
14" (36cm)
24 1/8"
(61cm)
11 1/2"
(29cm)
15"
(38cm)
24 1/8" (61cm)
15"
(38cm)
CHECK ONE BOX PER SECTION
CL
15"
(38cm)
39"
(99cm)
ø1 1/2"
(4cm)
ø7/8"
(2cm)
9 1/2"
(24cm)
9"
(23cm)
3 1/2"
(9cm)
9"
(23cm)
6 1/2"
(17cm)
3 1/4"
(8cm)
4 3/4"
(12cm)
5 1/4"
(
13cm)
Heavy Duty Water Closet
Standard Project Specific Options
Flush Valve □ Flush valve by others (specify punching) □ - FVT Sloan 611-1.6
Flush Valve Connection □ 1 1/2" FIPT
Toilet Waste Outlet □ 2 3/8" OD Plain Outlet
Suicide Prevention Skirt
□ None □ - SP
Available Installation Elements (ordered separately)
HDWC2414-RM-□
Wall Sleeve (specify thickness)
□ None □ WS-HDWC2414-A (for walls 3 5/8" thick)
□ WS-HDWC2414-B (for walls 5 5/8" thick)
□ WS-HDWC2414-C (for walls 6" thick)
□ WS-HDWC2414-D (for walls 7 5/8" thick)
□ WS-HDWC2414-E (for walls 8" thick)
□ WS-HDWC2414-X (for custom thickness
Metal Templates (one per project) □ None □ MT-HDWC2414
HDWC2414-RM-□
Rough-in Information
____________ please specify)
APPROVED FOR MANUFACTURE
Customer:
Name and Title (print):
Kindred Commercial Printed in Canada
Signature:
Date:
Quantity:
The latest rough in information is supplied with each fixture. Do not rough in without first verifying dimensions. Franke Kindred Canada reserves the right to make design and specification changes without prior
notice. Franke Kindred Canada will not assume any responsibility for the use of obsolete data. Please visit www.kindred-commercial.com for the latest specifications.
CANADA
Franke Kindred Canada Limited
1000 Franke Kindred Road, Midland, Ontario, Canada L4R 4K9
email info@franke.com www.kindred-commercial.com
Telephone 1-866-687-7465 Fax 1-800-361-8408
2
Please visit www.kindred-commercial.com for the latest specifications.
Model:
Sleeve or Template # (if required):
Kindred Commercial Printed in Canada
1110 61667
Loading...