Franke Foodservice AQRM668 Installation Manual
Installation and operating instructions Montage- en bedrijfsinstructies
Notice de montage et de mise en service Montaż i instrukcja obsługi
EA-Nr.: 7612982000584
FAR-Best.Nr. 2338 10 23
AQRM668
EA-Nr.: 7612982144707
FAR-Best.Nr. 2195 00 23
AQUA206
Franke Aquarotter GmbH
18-05.078e-Exp.fm/08.07.11
...............................................................3
Please refer to the graphics in the German Installation and Operating Instructions.
...............................................................7
Les graphiques sont disponibles dans la notice
de montage et de mise en service allemande.
...............................................................11
De tekeningen kunt u in de Duitse montage- en
bedrijfsinstructies vinden.
...............................................................15
Prosimy przyjąć grafikę z niemieckiej instrukcji
montażu i obsługi.
Inhaltsverzeichnis04.fm
2
0English
AQRM668 .................. Shower Systems
AQUA206 ................... Washing Bays
Please refer to the graphics in the German Installation and Operating Instructions.
0 Table of Contents
1. Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2. Important Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
3. Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
4. Technical Specifications . . . . . . . . . . . . . . . . . . . . . . . . 4
5. Scope of Delivery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
6. Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
7. Installation Example . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
8. Assembly Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . 5
9. Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
10. Adjusting the Flow Duration . . . . . . . . . . . . . . . . . . . . . 5
11. Replacing the Functional Part . . . . . . . . . . . . . . . . . . . 5
12. Fault Correction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
13. Replacement Parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
1. Warranty
Liability is accepted according to the General Terms and Conditions of Business and
Supply.
Use original replacement parts only!
2. Important Notes
• Installation, commissioning and maintenance are to be performed only by a
qualified technician according to the instructions provided and in accordance with
legal requirements and acknowledged rules of technology.
• All technical connection regulations specified by the local water and electricity
supply utility companies must be complied with.
• Before assembling and installing the pipes, flush in accordance with DIN 1988.
• Suitable cleaning agents that do not corrode the fittings are to be used as directed
and then completely removed.
• All rights reserved to make technical alterations.
18-05.078e-GB.fm
3
3. Application
AQUALINE self-closing straight-way valve DN 15 for shower systems and washing
bays for wall installation with sound-absorbent polystyrene insulation. For
connecting to pre-mixed warm water or cold water supply. Adjustable flow duration.
4. Technical Specifications
Minimum flow pressure: 1.0 bar
Calculation flow rate: 0.20 l/s
Volumetric flow: 0.40 l/s at a flow pressure of 3 bar (open
outlet)
Flow time at 38 °C: 1 - 50 s adjustable
(with shower head, 0.20 l/s at 3 bar flow
pressure)
5. Scope of Delivery
Quantity Description
1 Installation and Operating Instructions
1 AQUALINE self-closing straight-way valve
in 2 polystyrene half shells
1 Red marking ring on the fitting
1 Accompanying blue marking ring
1 Slide-on rosette
6. Dimensions
Only with 2195 21 23
Caution!
Do not insert the fitting too deeply into the wall. An adjustment is not possible.
7. Installation Example
4
18-05.078e-GB.fm
8. Assembly Instructions
8.1
Push the fitting in the wall niche provided and connect the water supply.
Check the direction of flow.
a:Flow direction
8.2
After tiling, cut the part of both polystyrene half shells sticking out of the wall with a
knife to the height of the front edge of tiles.
☞ Do not cut too deeply into the polystyrene half shells as otherwise you may damage
the fitting.
8.3
Break both polystyrene half shells with your hand.
8.4
Put on the slide on rosette.
9. Function
Triggering water flow
9.1
Press the push-cap.
• Water flows.
• Water flow stops automatically after a set flow duration.
☞ The flow time can be set in the range 1 - 50 s.
10. Adjusting the Flow Duration
10.1
Set the required mixed water temperature.
10.2
Remove the cover platelet.
a: Blade width 3 mm
10.3
Set the flow duration with a screwdriver.
a: Blade width 3 mm
+ longer flow duration (max. 50 s)
– shorter flow duration (min. 1 s)
10.4
Trigger the valve to measure the flow duration.
10.5
Put on the cover plate after setting the required flow time.
11. Replacing the Functional Part
11.1
Turn off the water supply.
11.2
Trigger the valve.
11.3
Remove the cover platelet.
a: Blade width 3 mm
11.4
18-05.078e-GB.fm
Remove the circlip.
5
11.5
Designation Order No.
1 Pressure cap. . . . . . . . . . . . . . . . . 82-500-01.028
1a Cover platelet . . . . . . . . . . . . . . . . 82-100-03.290
2 Functional part
Shower systems . . . . . . . . . . . 82-100-20.389
Washing bays . . . . . . . . . . . . . 82-100-20.390
3 Valve seat with O-ring. . . . . . . . . . 82-500-01.017
4 Slide-on rosette . . . . . . . . . . . . . . 82-100-10.397
Spare parts kit consisting of:
Rubber parts
Pressure spring
Circlip . . . . . . . . . . . . . . . . . . . 82-500-01.009
Remove the pressure cap and the spring.
11.6
Use a socket spanner to remove the functional part.
11.7
Reassemble in the reverse order.
11.8
Check the flow duration and correct if necessary (see Chapter 10.).
12. Fault Correction
Fault Cause Remedy
Valve does not open – Stop valve is closed
– Functional part faulty
➯ Open it
➯ Replace it
Valve does not close – Functional part faulty ➯ Replace it
Water flow too weak – Shower head/outlet is clogged with dirt
– Supply pressure too low
– Water volume regulator is not fully opened
Flow duration too
short or too long
– Incorrect setting
– Shower head/outlet is clogged with dirt
– Functional part faulty
➯ Cleaning
➯ Check it
➯ Open it
➯ Adjust it
➯ Cleaning
➯ Replace it
If you are unable to correct a fault, or if the fault is not described in the table, please
inform the customer service department.
13. Replacement Parts
6
18-05.078e-GB.fm
Loading...