Franke FNE 915 XS ECS Instructions For Use And Installation
Instructions for use and installation
Cooker Hood
Betjenings- og installationsvejledning
Emhætte
Handbok för installation, användning och underhăll
Spisfläkt
Håndbok for installasjon bruk og vedlikehold
Kjøkkenvifte
Asennus-, käyttö- ja hoito-opas
Liesituuletin
FNE 915 XS ECS
GB
DK
SE
NO
FI
2
2
INDEX
RECOMMENDATIONS AND SUGGESTIONS.....................................................................................................................3
CHARACTERISTICS.............................................................................................................................................................4
INSTALLATION...................................................................................................................................................................... 5
USE........................................................................................................................................................................................8
MAINTENANCE.....................................................................................................................................................................9
EASY CLEANING TM..........................................................................................................................................................11
INDHOLD
RÅD OG ANVISNINGER..................................................................................................................................................... 14
APPARATBESKRIVELSE ................................................................................................................................................... 15
INSTALLATION.................................................................................................................................................................... 16
BRUG................................................................................................................................................................................... 19
VEDLIGEHOLDELSE.......................................................................................................................................................... 20
EASY CLEANING TM..........................................................................................................................................................22
INNEHÅLL
REKOMMENDATIONER OCH TIPS................................................................................................................................... 25
EGENSKAPER.....................................................................................................................................................................26
INSTALLATION.................................................................................................................................................................... 27
ANVÄNDING........................................................................................................................................................................30
UNDERHÅLL........................................................................................................................................................................31
EASY CLEANING TM..........................................................................................................................................................33
INNHOLD
ANBEFALINGER OG FORSLAG........................................................................................................................................ 36
EGENSKAPER.....................................................................................................................................................................37
INSTALLASJON................................................................................................................................................................... 38
BRUK ...................................................................................................................................................................................41
VEDLIKEHOLD.................................................................................................................................................................... 42
EASY CLEANING TM..........................................................................................................................................................44
SISÄLTÖ
OHJEET JA SUOSITUKSET...............................................................................................................................................47
MITAT JA OSAT ..................................................................................................................................................................48
ASENNUS............................................................................................................................................................................49
KÄYTTÖ............................................................................................................................................................................... 52
HUOLTO .............................................................................................................................................................................. 53
EASY CLEANING TM..........................................................................................................................................................55
EN
DK
SE
NO
FI
EN
3
3
RECOMMENDATIONS AND SUGGESTIONS
The Instructions for Use apply to several versions of this appliance. Accord-
ingly, you may find descriptions of individual features that do not apply to
your specific appliance.
INSTALLATION
• The manufacturer will not be held liable for any damages resulting from incorrect or improper installation.
• The minimum safety distance between the cooker top and the extractor
hood is 650 mm (some models can be installed at a lower height, please refer to the paragraphs on working dimensions and installation).
• Check that the mains voltage corresponds to that indicated on the rating
plate fixed to the inside of the hood.
• For Class I appliances, check that the domestic power supply guarantees
adequate earthing.
Connect the extractor to the exhaust flue through a pipe of minimum diame-
ter 120 mm. The route of the flue must be as short as possible.
• Do not connect the extractor hood to exhaust ducts carrying combustion
fumes (boilers, fireplaces, etc.).
• If the extractor is used in conjunction with non-electrical appliances (e.g. gas
burning appliances), a sufficient degree of aeration must be guaranteed in
the room in order to prevent the backflow of exhaust gas. The kitchen must
have an opening communicating directly with the open air in order to
guarantee the entry of clean air.
USE
• The extractor hood has been designed exclusi vely for dom estic use to eliminate kitchen smells.
• Never use the hood for purposes other than for which it has been designed.
• Never leave high naked flames under the hood when it is in operation.
• Adjust the flame in tensity to dire ct it on to the bottom of the pan only, ma king
sure that it does not engulf the sides.
• Deep fat fryers must be continuously monitored during use: overheated oil
can burst into flames.
• Do not flambè under the range hood; risk of fire
• This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
MAINTENANCE
• Switch off or unplug the appliance from the mains supply before carrying out
any maintenance work.
• Clean and/or replace the Filters after the specified time period (Fire hazard).
• Clean the hood using a damp cloth and a neutral liquid detergent.
The symbol on the product or on its packaging indicates that this product may not be treated
as household waste. Instead it shall be hande d over to the applicable coll ection point for the
recycling of electrical a nd el ectr on ic e quipm e nt. By ens ur ing t his pr oduct is disp os ed of c orr ect ly ,
you will help prevent po tential negative consequenc es for the environment and hum an health,
which could otherwise be caused by inappropriate waste handling of this product. For more
detailed information about recycling of this product, please contact your local city office, your
household waste disposal service or the shop where you purchased the product.
EN
4
4
CHARACTERISTICS
Dimensions
Min.
450mm
Min.
450mm
Components
Ref. Q.ty Product Components
1 1 Hood Body, complete with: Controls, Light, Blower,
Filters
2 1 Telescopic Chimney comprising:
2.1 1 Upper Section
2.2 1 Lower Section
9 1 Reducer Flange ø 150-120 mm
14.1 2 Air Outlet Connection Extension
15 1 Air Outlet Connection
Ref. Q.ty Installation Components
7.2.1 2 Upper Chimney Section Fixing Brackets
7.3 1 Air Outlet Connection Support
11 7 Wall Plugs
12a 7 Screws 4,2 x 44,4
12c 6 Screws 2,9 x 9,5
Q.ty Documentation
1 Instruction Manual
12c
1
15
14.1
7.2.1
7.3
1112a
11
12a
2
2.1
2.2
9
EN
5
5
INSTALLATION
Wall drilling and bracket fixing
7.2.1
11
12a
X
116
1÷2
116
1040
450 mm min
Wall marking:
• Draw a vertical line on the supporting wall up to the ceiling, or as high as practical, at the
centre of the area in which the hood will be installed.
• Draw a horizontal line at 1040 mm above the hob.
• Place bracket 7.2.1 on the wall as shown about 1-2 mm from the ceiling or upper limit align-
ing the centre (notch) with the vertical reference line.
• Mark the wall at the centres of the holes in the bracket.
• Place bracket 7.2.1 on the wall as shown at X mm below the first bracket (X = height of the
upper chimney section supplied), aligning the centre (notch) with the vertical line.
• Mark the wall at the centres of the holes in the bracket.
• Mark a reference point as indicated at 116 mm from the vertical reference.
• Repeat this operation on the other side.
• Drill ø 8 mm holes at all the centre points marked.
• Insert the wall plugs 11 in the holes.
• Fix the lower bracket 7.2.1 by using the 12a screws (4,2 x 44,4) supplied.
• Fix the upper bracket 7.2.1 and the air outlet connection support 7.3 together using the 2
screws 12a (4,2 x 44,4) supplied.
• Insert the two screws 12a (4,2 x 44,4) supplied in the hood body fixing holes, leaving a gap
of 5-6 mm between the wall and the head of the screw.
EN
6
6
Hood body installation
• Before hooking the hood body it is necessary to tighten 2 Vr screws
placed in the fixing points of the body.
• Hook the hood body on the 12a screws.
• Tighten completely 12a support screws.
• The correct hood body position can be levelled with Vr screws.
• Fix the hood definitively by tightening the 12a security screw.
12a
Vr
Connections
DUCTED VERSION AIR EXHAUST SYSTEM
When installing the ducted version, connect the hood to the
chimney using either a flexible or rigid pipe ø 150 or 120 mm,
the choice of which is left to the installer.
• To install a ø 120 mm air exhaust connection, insert the reducer flange 9 on the hood body outlet.
• Fix the pipe in position using sufficient pipe clamps (not supplied).
• Remove possible charcoal filters.
9
ø 120ø 150
RECIRCULATION VERSION AIR OUTLET
• Insert the connection extension pieces laterally 14.1 in connection 15.
• Insert the Connector 15 into the Support bracket 7.3 and fix it
with a screw.
• Make sure that the outlet of the extension pieces 14.1 is horizontally and vertically aligned with the chimney outlets.
• Connect the air outlet connection 15 to the hood body outlet
using either a flexible or rigid pipe ø 150 mm, the choice of
which is left to the installer.
• Ensure that the activated charcoal filters have been inserted.
ø 150
15
14.1
7.3
EN
7
7
ELECTRICAL CONNECTION
• Connect the hood to the mains through a two-pole switch having a contact gap of at least 3 mm.
• Remove the grease filters (see paragraph Maintenance) being
sure that the connector of the feeding cable is correctly inserted
in the socket placed on the side of the fan.
Flue assembly
Upper exhaust flue
• Slightly widen the two sides of the upper flue and hook them
behind the brackets 7.2.1, making sure that they are well
seated.
• Secure the sides to the brackets by using the 4 screws 12c (2,9
x 9,5) supplied.
• Make sure that the outlet of the extensions pieces is aligned
with the chimney outlets.
Lower exhaust flue
• Slightly widen the two sides of the flue and hook them between the upper flue and the wall, making sure that they are
well seated.
• Fix the lower part laterally to the hood body by using the 2
screws 12c (2,9 x 9,5) supplied.
7.2.1
12c
2
2.1
2.2
12c
12c
EN
8
8
USE
T2
T1
L
T3
Control panel
BUTTON LED FUNCTIONS
T1 Speed On Turns the Motor on at Speed one.
Turns the Motor off.
T2 Speed On Turns the Motor on at Speed two.
T3 Speed Fixed When pressed briefly, turns the Motor on at Speed three.
Flashing Pressed for 2 Seconds.
Activates Speed four with a timer set to 10 minutes, after
which it returns to the speed that was set previously. Suitable
to deal with maximum levels of cooking fumes.
L Light Turns the Lighting Sy stem on and off.
Warning: Button T1 turns the motor off, after first passing to speed one.
EN
9
9
MAINTENANCE
Cleaning the Comfort Panels
• Pull the Comfort Panel to open it.
• Disconnect the panel from the hood canopy by sliding the fixing pin lever.
• The comfort panel must never be washed in a dishwasher.
• Clean the outside by using a damp cloth and neutral liquid detergent.
• Clean the inside as well by using a damp cloth and neutral detergent; do not use wet cloths or sponges, or jets of water; do
not use abrasive substances.
• When the above operation has been completed, hook the panel
back to the hood canopy and close it by turning the knob in the
opposite direction.
Grease filters
CLEANING METAL SELF- SUPPORTING GREASE FILTERS
• The filters must be cleaned every 2 months of operation, or
more frequently for particularly heavy usage, and can be
washed in a dishwasher.
• Pull the comfort panels to open them.
• Remove the filters one by one pushing them towards the back
side of the hood unit and simultaneously pulling downwards.
• Any kind of bending of the filters has to be avoided when
washing them. Before fitting them again into the hood make
sure that they are completely dry. (The colour of the filter surface may change throughout the time but this has no influence
to the filter efficiency).
• When fitting the filters into the hood pay attention that they are
mounted in correct position the handle facing outwards.
• Close the comfort panel.
EN
1
10
Activated charcoal filter (Recirculation version)
REPLACING THE ACTIVATED CHARCOAL FILTER
• The filter is not washable and cannot be regenerated, and must
be replaced approximately every 4 months of operation, or
more frequently for particularly heavy usage.
• Open the comfort panels pulling them downwards.
• Remove t h e metal grease filters.
• Remove the saturated charcoal filter by releasing the fixing
hooks
• Fit the new filter and fasten it in its correct position.
• Put the metal grease filters in their seats.
• Close the comfort panels.
Lighting
LIGHT REPLACEMENT
20 W halogen light.
• Remove the 2 screws fixing the Lighting support, and pull it
out of from the Hood.
• Extract the lamp from the Support.
• Replace with another of the same type, making sure that the
two pins are properly inserted in the lamp holder socket holes.
• Refit the Support, fixing it in place with the two screws removed as above.
EN
1
11
EASY CLEANING TM
Removing the Grease Filters
Before carrying out Maintenance on the
EASY CLEANING Suction Unit:
• Disconnect the hood by switching off the
twopole switch on the mains power supply
line, or by switching off the main power
switch.
• Remove the grease filters from the hood.
• If the hood is of the recirculation type, remove the odour filters:
• For hoods with a flat cartridge (A): turn the
fastening elements provided;
• For hoods with a bayonet cartridge (B):
turn as indicated and extract.
Disconnecting the EASY CLEANING Suction Unit
• Disconnect the power connector Ca and the
control and lighting connector Cmd on the
sides of the unit.
• For wall-mounted hoods and free-standing
hoods with square chimney, turn the levers
Lb locking the suction unit, so that they
disconnect from the pins.
• For free-standing hoods with round chimney, unscrew the plugs Vb locking the suction unit.
• Pull the suction unit forwards so that it unhooks from the support pins, and remove it
downwards through the air outlet.
CmdCa
Lb
Vb
A
B
EN
1
12
Dismantling Washable Parts
• To remove the side grilles protecting the
fans, lift up the stop tooth using a knife or
screwdriver and turn the grilles in the direction indicated by the arrow.
• Grasp the fans in the holes provided and
pull to extract.
CLEANING
• Wash the fans and the protection grilles,
using normal washing-up liquid. These
elements can also be washed in the dishwasher.
• Using a damp cloth and a suitable detergent, clean the body of the suction device,
taking great care not to allow any water to
leak into the inside of the unit or into the
connector housings.
• Leave until completely dry bifore reassembling.
• Using a brush, clean the air outlet pipe as
far as you can reach.
FREE
LOCK
O
P
E
N
EN
1
13
REASSEMBLY
N.B. To avoid reassembling the wrong way
round, the two fans have different couplings.
• Reassemble the fans on the corresponding
pins, pressing them until they snap into
place.
• Fit the protection grilles so that the teeth
coincide in the “FREE” position and when
turned to “LOCK”.
• Replace the EASY CLEANING suction
unit on the hood, inserting it in position and
connecting it to the support pins.
• Turn the lock levers, or screw in the lock
plugs.
• Connect the power connector and the
command connector to the sockets on the
sides of the suction device.
• Replace any activated charcoal odour filters.
• Replace the grease filters.
• Connect the hood to the power supply system, by turning the two-pole switch on the
mains power line to on, or by turning the
main switch on.
• Check that the hood is working properly,
by turning the motor and lighting on.
LOCK
O
P
E
N
FREE
DK
1
14
RÅD OG ANVISNINGER
Denne brugervejledning gælder for flere versioner af apparatet.
Der fremstilles muligvis enkelte dele af tilbehøret, der ikke vedrører jeres apparat.
INSTALLATION
• Producenten kan ikke holdes ansvarlig for eventuelle skader, der skyldes ukorrekt
eller forkert installation.
• Den mindst tilladelige sikkerhedsafstand mellem komfurets top og emhættens underside er 650 mm (nogle modeller kan installeres lavere, jævnfør afsnittene vedrørende
ydre mål og installation).
• Kontrollér, at lysnetspændingen er den samme som den spænding, der er angivet
mærkepladen, der sidder på inde i emhætten.
• For Klasse I apparater skal det også kontrolleres, at elforsyningen er forsynet med
jord.
• Emhætten kobles til aftrækskanalen ved hjælp af et rør med en min.-diameter på 120
mm. Afstanden fra emhætten til kanalen skal være så kort som mulig.
• Emhætten må ikke tilsluttes en kanal, der fører forbrændingsgasser ud i det fri (oliefyr, brændeovne etc.).
• Hvis emhætten skal anvendes i forbindelse med ikke-elektriske apparater (f.eks.
gaskomfur, gaskogeblus), skal det sikres, at lufttilgangen til rummet er tilstrækkelig,
så aftræksgasserne ikke slår tilbage. Køkkenet skal have en åbning, der har direkte
forbindelse til det fri, så der er sikret en tilstrækkelig mængde ren luft.
ANVENDELSE
• Emhætten er udelukkende beregnet til at fjerne em og lugte i køkkener i private husholdninger.
• Emhætten må kun anvendes til det formål, hvortil den er konstrueret.
• Der må ikke forekomme høj åben ild under emhætten, mens den anvendes.
• Justér brænderen, så flammerne er rettet direkte mod bunden af panden/gryden – de
må ikke nå ud over kanten af bunden.
• Frituregryder skal under brug holdes under konstant opsyn: kogende varm olie kan
sprøjte ind i flammerne.
• Emhætten må ikke anvendes af børn og personer, som ikke ved, hvordan den betjenes.
• Apparatet er ikke beregnet til at skulle anvendes af mindre børn eller svækkede personer uden opsyn.
• Undlad at flambere retter under emhætten; der opstår ellers brandfare.
• Dette apparat må ikke anvendes af personer (derunder børn) med nedsatt e psykiske,
sensoriske eller sindsmæssige evner, eller personer uden erfaring eller tilstrækkeligt
kendskab, med mindre de overvåges eller oplæres i brug af apparatet af personer,
der er ansvarlige for deres sikkerhed.
• Børn skal overvåges for at undgå, at de leger med apparatet.
VEDLIGEHOLDELSE
• Inden apparatet skal vedligeholdes eller rengøres, skal der slukkes for det eller stikket skal tages ud af stikkontakten.
• Rengør og/eller udskift filtrene iht. det angivne tidinterval (Brandbare).
• Rengør emhætten ved hjælp af en fugtig klud og et neutralt flydende rengøringsmiddel.
Symbolet på produkt et eller på pakken angiver, at dette produkt ikke må behandl es som husholdningsaffald. Det skal i stedet overgives til en affaldsstation for b ehandling af elektris k og elektronisk udstyr. Ved at sørge f or at dette produkt bliver borts kaffet på den ret te måde, hjælper du med til
at forebygge eventuelle negative påvirkninger af miljøet og af personers helbred, der ellers kunne
forårsages af forkert bort skaffels e af dette pr odukt. Kontakt det lok ale komm unekontor, affaldssel skab
eller den forretning, hvo r produkt er købt, for y derligere oplysninger om genanvendelse af dett e produkt.
DK
1
15
APPARATBESKRIVELSE
Dimensioner
Min.
450mm
Min.
450mm
Komponenter
Ref. Stk. Produktets komponenter
1 1 Emhættens hoveddel inkl.: Betjeningsanordninger, lys,
ventilatorenhed, filtre
2 1 Teleskopaftræk bestående af:
2.1 1 Øverste aftræk
2.2 1 Nederste aftræk
9 1 Passtykke ø 150-120 mm
14.1 2 Forlænger til luftudstrømnings overgangsstykke
15 1 Luftudstrømnings overgangsstykke
Ref. Stk. Installationsdele
7.2.1 2 Beslag til befæstigelse af øverste aftræk
7.3 1 Støttebeslag til overgangsstykket
11 7 Forankringer
12a 7 Skruer 4,2 x 44,4
12c 6 Skruer 2,9 x 9,5
Stk. Dokumentation
1 Brugerhåndbog
12c
1
15
14.1
7.2.1
7.3
1112a
11
12a
2
2.1
2.2
9
DK
1
16
INSTALLATION
Boring i væg og fastgørelse af beslag
7.2.1
11
12a
X
116
1÷2
116
1040
450 mm min
Afmærkning på væg:
• Tegn en lodret linje på væggen op til loftet eller så højt, det er praktisk, for at markere midten af, hvor emhætten skal placeres.
• Tegn en vandret linje 1040 over kogepladen.
• Placer beslaget 7.2.1 på væggen som vist ca. 1-2 mm fra loftet eller den øverste grænse, idet
beslagets midte (hakket) placeres på den lodrette fikslinje.
• Sæt et mærke på væggen i midten af beslagets huller.
• Placer beslaget 7.2.1 på væggen som vist X mm under det første beslag (X = højden af den
øverste del af aftrækskanalen), idet beslagets midte (hakket) placeres på den lodrette linje.
• Sæt et mærke på væggen i midten af beslagets huller.
• Marker et fikspunkt som vist 116 mm fra den lodrette fikslinje.
• Gentag dette på den anden side.
• Bor huller (ø 8 mm) i alle de markerede midterpunkter.
• Sæt rawlpluggene 11 i hullerne.
• Fastgør det nederste beslag 7.2.1 ved brug af de medfølgende skruer 12a (4,2 x 44,4).
• Fastgør det øverste beslag 7.2.1 og støttebeslaget til luftaftræksstykket 7.3 sammen ved brug
af de to medfølgende skruer 12a (4,2 x 44,4).
• Skru de to medfølgende skruer 12a (4,2 x 44,4) i emhættens monteringshuller, således at der
er en afstand på 5-6 mm mellem væggen og skruens hoved.
DK
1
17
Montering af emhætte
• Inden man hænger emhætten op, skal man stramme de to skruer Vr, som sidder i hættens ophængningspunkter.
• Hæng emhætten op på de forberedte skruer 12a.
• Stram ophængningsskruerne 12a helt til.
• Ved at dreje på skruerne Vr nivelleres emhætten.
• Fastgør emhætten definitivt ved at stramme 12a sikkerhed
skruen.
12a
Vr
Tilslutninger
AFSKÆRMET UDGAVE LUFTAFTRÆKSYSTEM
Når den afskærmede version installeres, skal emhætten tilsluttes
skorstenen ved hjælp af enten et flex- eller et stift rør ø 150 eller
120 mm. Det beslutter installatøren
• For at installere en ø 120 mm tilslutning til luftaftræk skal reduktionsflangen 9 sættes på emhættens udtræk.
• Fastgør røret på plads ved hjælp af tilstrækkeligt med rørholdere (ikke medleveret).
• Fjern alle aktive kulfiltre.
9
ø 120ø 150
LUFTUDSTRØMNING PÅ FILTRERENDE VERSION
• Før overgangsstykkets forlængere 14.1 ind på siden af overgangsstykket 15.
• Før overgangsstykket 15 ind i støttebeslaget 7.3, og spær det
fast med en skrue.
• Sørg for at udgangen på overgangsstykkets forlængere 14.1
befinder sig ud for aftrækkets mundinger, både vandret og lodret.
• Forbind overgangsstykket 15 til emhættens hoveddels udgang
ved hjælp af et rør eller en flexslange med ø150, som det påhviler installatøren at vælge.
• Sørg for, at lugtfiltret med aktivt kul er monteret.
ø 150
15
14.1
7.3
DK
1
18
TILSLUTNING TIL STRØMFORSYNING
• Tilslut emhætten til elnettet, idet der indsættes en topolet afbryder med en kontaktafstand på mindst 3 mm.
• Fjern fedtfiltrene (se afsnittet ”Vedligeholdelse”) og kontroller,
at eltilslutningens kabelklemme er korrekt indsat i udsugningsgruppens stik.
Montering af aftræk
Øverste aftræk
• Skub de to sideflapper lidt ud, sæt dem fast bag ved beslagene
7.2.1, og luk dem til igen, helt til stoppet.
• Fastgør dem på siden af beslagene ved hjælp af de 4 medfølgende skruer 12c (2,9 x 9,5 ).
• Sørg for at udgangen på overgangsstykkets forlængere befinder
sig ud for aftrækkets mundinger.
Nederste aftræk
• Skub aftrækkets sideflapper lidt ud, sæt dem fast mellem det
øverste aftræk og væggen, og luk dem igen, helt til stoppet.
• Fastgør undersiden på siden af emhættens hoveddel ved hjælp
af de 2 medfølgende skruer 12c (2,9 x 9,5 ).
7.2.1
12c
2
2.1
2.2
12c
12c
Loading...