Foxconn H55M-S User Manual

H55M Series Motherboard

User’s Manual

Statement:

This manual is the intellectual property of Foxconn, Inc. Although the information

in this manual may be changed or modied at any time, Foxconn does not obligate

itself to inform the user of these changes.

Trademark:

All trademarks are the property of their respective owners.

Version:

User’s Manual V1.0 for H55M Series motherboard.

P/N: 3A2228F00-000-G

Symbol description:

N

O

I

T

U

A

C

W

Caution: refers to important information that can help you to use motherboard

!

I

N

N

G

R

A

!

better, and tells you how to avoid problems.

Warning: indicating a potential risk of hardware damage or physical injury may

exist.

WEEE:

The use of this symbol indicates that this product may not be treated as household

waste. By ensuring this product is disposed of correctly, you will help prevent potential

negative consequences for the environment and human health, which could other-

wise be caused by inappropriate waste handling of this product. For more detailed

information about recycling of this product, please contact your local city ofce, your

household waste disposal service or the shop where you purchased this product.

More information:

If you want more information about our products, please visit Foxconn’s

website: http://www.foxconnchannel.com

© All rights reserved.

All trade names are registered trademarks of respective manufacturers listed.

All images are for reference only, please refer to the physical motherboard for specic features.

Declaration of conformity

HON HAI PRECISION INDUSTRY COMPANY LTD

66 , CHUNG SHAN RD., TU-CHENG INDUSTRIAL DISTRICT,

TAIPEI HSIEN, TAIWAN, R.O.C.

declares that the product

Motherboard H55M/H55M-S/H55M-V

is in conformity with

(reference to the specication under which conformity is declared in

accordance with 89/336 EEC-EMC Directive)

■ EN 55022: 1998/A2: 2003 Limits and methods of measurements of radio

disturbance characteristics of information technology
equipment

■ EN 61000-3-2/:2000 Electromagnetic compatibility (EMC)

Part 3: Limits
Section 2: Limits for harmonic current emissions
(equipment input current <= 16A per phase)

■ EN 61000-3-3/A1:2001 Electromagnetic compatibility (EMC)

Part 3: Limits

Section 2: Limits of voltage uctuations and icker in low

voltage supply systems for equipment with rated current
<= 16A

■ EN 55024/A2:2003 Information technology equipment-Immunity

characteristics limits and methods of measurement

Signature : Place / Date : TAIPEI/2010

Printed Name : James Liang

Declaration of conformity

Trade Name: FOXCONN

Model Name: H55M/H55M-S/H55M-V

Responsible Party: PCE Industry Inc.

Address: 458 E. Lambert Rd.

Fullerton, CA 92835

Telephone: [phone]

Facsimile: 714-738-8838

Equipment Classication: FCC Class B Subassembly

Type of Product: Motherboard

Manufacturer: HON HAI PRECISION INDUSTRY

COMPANY LTD

Address: 66 , CHUNG SHAN RD., TU-CHENG

INDUSTRIAL DISTRICT, TAIPEI HSIEN,

TAIWAN, R.O.C.

Supplementary Information:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions : (1) this device may not cause harmful interference, and (2) this device

must accept any interference received, including interference that may cause undesired

operation.

Tested to comply with FCC standards.

Signature : Date : 2010

Installation Precautions

I

N

N

G

R

A

!

W

■ Electrostatic discharge (ESD) is the sudden and momentary electric current

that ows between two objects at different electrical potentials. Normally it

comes out as a spark which will quickly damage your electronic equipment.

Please wear an electrostatic discharge (ESD) wrist strap when handling

components such as a motherboard, CPU or memory.

■ Ensure that the DC power supply is turned off before installing or removing

CPU, memory, expansion cards or other peripherals. It is recommended to

unplug the AC power cord from the power supply outlet. Failure to unplug

the power supply cord may result in serious damage to your system.

N

O

I

T

U

A

C

!

Please carefully read the following procedures to install your computer :

■ It is suggested to select high-quality, certied fans in order to avoid damage

to the motherboard and CPU due to high temperature. Never turn on the

computer if the CPU fan is not properly installed.

■ We cannot guarantee that your system can operate normally when your

CPU is overclocked. Normal operation depends on the overclocking capac-

ity of your device.

■ If there is any, when connecting USB, audio, 1394a, RS232 COM, IrDA or

S/PDIF cables to the internal connectors on the motherboard, make sure

their pinouts are matching with the connectors on the motherboard. Incorrect

connections might damage the motherboard.

■ When handling the motherboard, avoid touching any metal leads or connec-

tors.

■ If there is a PCI Express x16 graphics card installed in your system, we

recommend using a 24-pin ATX power supply to get the best performance.

■ Before turning on the power, please make sure the power supply AC input

voltage setting has been congured to the local standard.

■ To prevent damage to the motherboard, do not allow screws to come in contact

with the motherboard circuit or its components. Also, make sure there are no

leftover screws or metal components placed on the motherboard or within the

computer casing.

■ If you are uncertain about any installation steps or have a problem related to

the use of the product, please consult a certied computer technician.

TABLE OF CONTENTS

Chapter 1 Product Introduction

Product Specications ..............................................................................2

Layout.......................................................................................................4

Back Panel Connectors ............................................................................5

Chapter 2 Hardware Install

Install the CPU and CPU Cooler ..............................................................8

Install the Memory .................................................................................. 11

Install an Expansion Card ......................................................................13

Install other Internal Connectors ............................................................14

Jumpers ..................................................................................................18

Chapter 3 BIOS Setup

Enter BIOS Setup ...................................................................................21

Main Menu..............................................................................................21

System Information ................................................................................23

Advanced BIOS Features.......................................................................25

Fox Central Control Unit .........................................................................28

Advanced Chipset Features ...................................................................32

Integrated Peripherals ............................................................................33

Power Management Setup .....................................................................37

PC Health Status ....................................................................................39

BIOS Security Features..........................................................................40

Load Optimal Defaults ............................................................................41

Save Changes and Exit ..........................................................................41

Discard Changes and Exit ......................................................................41

Chapter 4 CD Instruction

Utility CD content....................................................................................43

Install driver and utility ............................................................................44

FOX ONE

Main Page ........................................................................................46

CPU Control .....................................................................................50

Frequency Control ............................................................................52

Limit Setting......................................................................................53

Voltage Control .................................................................................55

Fan Control.......................................................................................56

FOX LiveUpdate

Local Update ....................................................................................57

Online Update ..................................................................................59

Congure .........................................................................................62

About & Help ....................................................................................64

FOX LOGO .............................................................................................65

FOX DMI ................................................................................................66

Technical Support :

Support

Website :

http://www.foxconnchannel.com

Support Website :

http://www.foxconnsupport.com

Worldwide online contact Support :

http://www.foxconnsupport.com/inquiry.aspx

CPU Support List :

http://www.foxconnsupport.com/cpusupportlist.aspx

Memory, VGA Compatibility List :

http://www.foxconnsupport.com/complist.aspx

Thank you for buying Foxconn H55M Series motherboard. Foxconn

products are engineered to maximize computing power, providing

only what you need for break-through performance.

With advanced overclocking capability and a range of connectivity

features for today multi-media computing requirements, H55M Series

enables you to unleash more power from your computer.

This chapter includes the following information:

■ Product Specications

■ Layout

■ Back Panel Connectors

1-1 Product Specications

CPU Support LGA 1156 socket Intel® CPU, Max processor power up to 95w

1

Chipset Intel® H55

Memory 4 x 240-pin DDR3 DIMM sockets

Expansion Slots 1 x PCI Express x16 slot

VGA Integrated Graphics Support with PAVP 1.5

Storage H55 chipset:

LAN Giga Lan RTL8111DL

Audio ALC662/ALC888S,

USB Support hot plug

For the latest CPU information, please visit:

http://www.foxconnsupport.com/cpusupportlist.aspx

Support up to 16GB of system memory

Dual channel DDR3 1600(oc*)/1333/1066 MHz architecture

(oc:Overclocking)

1 x PCI Express x1 slot

2 x PCI slots

Dual independent displays support with DVI-D and D-Sub

- 6 x SATA connectors

300MB/s data transfer rate

- Support hot plug and NCQ (Native Command Queuing)

- High Denition Audio

- 2/4/5.1/7.1(ALC888S)-channel

- Support for S/PDIF OUT

- Support Jack- Sensing function

Supports up to 12 x USB 2.0 ports (6 rear panel ports, 3 onboard USB

headers supporting 6 extra ports

Support USB 2.0 protocol up to 480Mb/s

(Continued on the next page)

2

Internal Connectors 1 x 24-pin ATX main power connector

1 x 4-pin ATX 12V power connector

1 x CPU fan header (4-pin)

1 x System fan headers (4-pin)

1 x Front Audio connector

1 x SPDIF-OUT connector

1 x Speaker connector

3 x USB 2.0 connectors (supporting 6 x USB devices)

1 x Front Panel connector

6 x SATA connectors

1 x TPM connector (Optional)

1 x COM connector (Optional)

1 x INTR connector

1 x CIR connector

1 x LPT connector (Optional)

Back Panel

Connectors

Hardware Monitor System voltage detection

PCI Express x1 Support 250MB/s (500MB/s concurrent) bandwidth

PCI Express x16

Gen2.0

Green Function Support ACPI (Advanced Conguration and Power Interface)

Bundled Software FOX ONE

Operating System Support for Microsoft® Windows® 7/Vista/XP

Form Factor Micro ATX Form Factor, 9.6 inches x 9.0 inches (24.4cm x 22.9cm)

1 x PS/2 keyboard port

1 x PS/2 mouse port

1 x COM1 port (Optional)

6 x USB 2.0 ports

1 x DVI-D port (Optional)

1 x VGA port

1 x RJ-45 LAN port

8-channel Audio Ports

CPU/System temperature detection

CPU/System fan speed detection

CPU overheating warning

CPU/System fan speed control

Low power consumption and power management features

Support 8GB/s (16GB/s concurrent) bandwidth

Low power consumption and power management features

Support S0 (normal), S1 (power on suspend), S3 (suspend to RAM),

S4 (suspend to disk), S5 (soft - off)

Support EuP function

FOX LiveUpdate

FOX LOGO

FOX DMI

1

3

1-2 Layout

1

6

7

8

9

10

11

12

13

14

15

1. 4-pin ATX 12V Power Connector

2. SYS_FAN Header

3. PCI Express x16 Slot

4. PCI Express x1 Slot

5. PCI Slots

6. Front Audio Connector

7. S/PDIF Out Connector

8. Speaker Connector

9. Intel® ME Jumper

10. Front USB Connectors

11. Clear CMOS Jumper

12. TPM Connector (Optional)

4

5

16

3

17

2

18

1

23

22

21

20

19

13. CIR Connector

14. LPT Connector (Optional)

15. Chipset: Intel® H55

16. SATA Connectors

17. Front Panel1

18. Connector 24-pin ATX Power Connector

19. Chassis Intrusion Alarm Header

20. COM2 Connector (Optional)

21. DDR3 DIMM Slots

22. CPU_FAN Header

23. LGA1156 CPU Socket

Note : The above motherboard layout is for reference only, please refer to the physical

motherboard for detail.

4

1-3 Back Panel Connectors

Back Panel of 8 Channel

PS/2 Mouse Port

1

2

PS/2 Keyboard

4

COM Port

Port

Back Panel of 6 Channel

VGA Port

3

5

DVI-D Port

LAN Port

6

USB Ports

6

USB Ports

8

1

Line Out

Line In

Rear Speaker

Subwoofer

Side Speaker

Microphone

7

Audio Ports

Line In

Line Out

Microphone

7

Audio Ports

1. PS/2 Mouse Port

Use the upper port (green) to connect a PS/2 mouse.

2. PS/2 Keyboard Port

Use the lower port (purple) to connect a PS/2 keyboard.

3. VGA Port

To connect with external display devices, such as monitor or LCD display.

4. COM Port (Optional)

This connector provides printer port interface.

5. DVI-D Port (Optional)

The DVI-D port supports DVI-D specication. Connect a monitor that supports DVI-D connec-

tion to this port.

6. USB Ports

The USB port supports the USB 2.0/1.1 specication. Use this port for USB devices such as an

USB keyboard/mouse, USB printer, USB ash drive and etc.

7. Audio Ports

For the denition of each audio port, please refer to the table below :

5

Audio Ports of 8 Channel

Port 2-channel 4-channel 5.1-channel 7.1-channel

1

Blue Line In Line In Line In Line In

Green Line Out Front Speaker Out Front Speaker Out Front Speaker Out

Pink Microphone In Microphone In Microphone In Microphone In

Orange - - Center/Subwoofer Out Center/Subwoofer Out

Black - Rear Speaker Out Rear Speaker Out Rear Speaker Out

Grey - - - Side Speaker Out

Audio Ports of 6 Channel

Port 2-channel 4-channel 5.1-channel

Blue Line In Rear Speaker Out* Rear Speaker Out*

Green Line Out Front Speaker Out Front Speaker Out

Pink Microphone In Microphone In Center/Subwoofer Out*

* : Please refer to Chapter 4, and install the Realtek audio driver (in CD) to assign the audio

output ports for different applications of 2/4/5.1 channels. The fundamental audio outputs are

depicted in the table above.

8. RJ-45 LAN Port

The Ethernet LAN port provides Internet connection at up to 10/100/1000Mb/s data rate.

LAN Type

1000M

Left: Active Right: Link

Status Description Status Description

Off No Link Off No Link

Green

Blinking

Data

Activity

Off 10Mb/s Connection

Green 100Mb/s Connection

Orange 1000Mb/s Connection

6

Active

LED

Link

LED

This chapter introduces the hardware installation process, including

the installation of the CPU, memory, power supply, slots, pin headers

and the mounting of jumpers. Caution should be exercised during the

installation of these modules. Please refer to the motherboard layout

prior to any installation and read the contents in this chapter carefully.

This chapter includes the following information :

■ Install the CPU and CPU Cooler

■ Install the Memory

■ Install an Expansion Card

■ Install other Internal Connectors

■ Jumpers

Please visit the following website for more supporting information about your motherboard.

CPU Support List:

http://www.foxconnsupport.com/cpusupportlist.aspx

Memory, VGA Compatibility List:

http://www.foxconnsupport.com/complist.aspx

2-1 Install the CPU and CPU Cooler

N

O

I

T

U

A

C

!

Read the following guidelines before you begin to install the CPU :

■ Make sure that the motherboard supports the CPU.

■ Always turn off the computer and unplug the power cord from the power supply before

2

installing the CPU to prevent hardware damage.

■ Locate the pin one of the CPU. The CPU cannot be inserted if oriented incorrectly. (Or

you may locate the notches on both sides of the CPU and alignment keys on the CPU

socket.)

■ Apply an even and thin layer of thermal grease on the surface of the CPU.

■ Do not turn on the computer if the CPU cooler is not installed, otherwise overheating

and damage of the CPU may occur.

■ Set the CPU host frequency in accordance with the CPU specications. It is not

recommended that the system bus frequency be set beyond hardware specications

since it does not meet the standard requirements for the peripherals. If you wish to

set the frequency beyond the standard specications, please do so according to your

hardware specications including the CPU, graphics card, memory, hard drive, etc.

Hyper-Threading Technology System Requirements:

(Go to Intel's website for more information about the Hyper-Threading Technology)

■ An Intel® CPU that supports HT Technology

■ A chipset that supports HT Technology

■ An operating system that is optimized for HT Technology

■ A BIOS that supports HT Technology and has it enabled

Install the CPU

Locate the alignment keys on the motherboard CPU socket and the notches on the CPU.

LGA1156 CPU Socket

Alignment Key

Pin-1 corner of

the CPU Socket

LGA1156 CPU

Notch

Pin-1 triangle

marking of CPU

8

8

Follow the steps to install the CPU onto the CPU socket :

N

O

UTI

CA

!

Before installing the CPU, make sure to turn off the computer and unplug the power

cord from the power outlet to prevent damage to the CPU.

2

1. Release the CPU socket lever.

3. Remove protective socket cover.

2. Lift the metal cover on the CPU

socket.

4. Check pin one marking (triangle)

with the pin one corner of the CPU

socket, align the CPU notches with

the socket alignment keys and gently

put the CPU onto the socket.

5. When CPU is properly seated,

replace the metal cover and push the

CPU socket lever back to its locked

position.

9

9

Install the CPU Cooler

Follow the steps below to correctly install the CPU cooler on the motherboard.

2

1. Apply and spread an even thermal
grease on the surface of CPU.

3. Chec k the sol de r side of the
motherboard, the push pin should be

xed as depicted in the picture.

3

2

1

2. Place the four bolts of the CPU
cooler to the holes of the motherboard,
push them straight down from the top,
and the bolts will be fastened on the
motherboard. That's it.

4. Attach t he 4-wire C PU cooler

connector to the CPU FAN header
on the motherboard .

Release bolts of CPU cooler from
motherboard :

1.Tu r n i n g the p u s h p i n ( b o l t )
along with the direction of arrow
(counterclockwise).

2. Pull the push pin straight up.

3. Turning push pin clockwise to its
default position.

N

O

I

T

U

A

!

C

Use extreme care when removing the CPU cooler because the thermal grease may
adhere to the CPU. Inadequately removing the CPU cooler may damage the CPU.

10

10

2-2 Install the Memory

N

O

I

T

U

A

C

!

Read the following guidelines before you begin to install the memory :

■ Make sure that the motherboard supports the memory. It is recommended that memory

of the same capacity, brand, speed, and chips be used.

■ Always turn off the computer and unplug the power cord from the power outlet before

installing the memory to prevent hardware damage.

■ Memory modules have a foolproof design. A memory module can be installed in only

one direction. If you are unable to insert the memory, switch the direction.

Dual Channel Memory Conguration

This motherboard provides four DDR3 memory sockets and supports Dual Channel Technology.

When memory is installed, the BIOS will automatically check the memory in your system.

Four DDR3 memory sockets are divided into two channels and each channel has two memory

sockets as following:

Channel 0 : DIMM1, DIMM2

Channel 1 : DIMM3, DIMM4

The combinations of DIMM modules are :

2

DIMM1 DIMM2 DIMM3 DIMM4

Single Channel DS/SS - - -

Single Channel DS/SS DS/SS - -

Single Channel - - DS/SS -

Single Channel - - DS/SS DS/SS

Dual Channel DS/SS - DS/SS -

Dual Channel DS/SS DS/SS DS/SS DS/SS

(DS : Double Side, SS : Single Side, - : No Memory)

N

O

I

T

U

A

C

!

For this motherboard, DIMM(1,2), DIMM(3,4), are two pairs of channels. In each pair

of DIMM channel, you need to install white DIMM rst, then install blue DIMM the

second. Blue DIMM can not function if no white DIMM is installed. (Please refer to

the silkscreen next to the DIMM slots to identify the sequence of DIMM(1,2,3,4) on

the motherboard.)

11

11

Installing a Memory

N

O

I

T

U

A

C

!

■ Before installing a memory module, make sure to turn off the computer and unplug the

power cord from the power outlet to prevent damage to the memory module. Be sure to

2

install DDR3 DIMMs on this motherboard.

144-Pin

96-Pin

Notch

If you take a look at front side of memory module, it has asymmetric pin counts on both sides separated

by a notch in the middle, so it can only t in one direction. Follow the steps below to correctly install

your memory modules into the sockets.

Step 1:
Spread the clips at both ends of the memory socket.
Place the memory module onto the socket, then put

your ngers on top edge of the module, and push
it down rmly and seat it vertically into the memory

socket.

Step 2:
The clips at both ends of the socket will snap into place
when the memory module is securely inserted.

12

12

2-3 Install an Expansion Card

N

O

I

T

U

A

C

!

■ Make sure the motherboard supports the expansion card. Carefully read the manual

that came with your expansion card.

■ Always turn off the computer and unplug the power cord from the power outlet before

installing an expansion card to prevent hardware damage.

PCI Express x16

PCI Express x1

PCI

Follow the steps below to correctly install your expansion card in the expansion slot.

1. Locate an expansion slot that supports your card. Remove the metal slot cover from the chassis

back panel.

2. Align the card with the slot, and press down on the card until it is fully seated in the slot.

3. Make sure the metal contacts on the card are completely inserted into the slot.

4. Secure the card's metal bracket to the chassis back panel with a screw.

5. After installing all expansion cards, replace the chassis cover.

6. Turn on your computer. If necessary, go to BIOS Setup to make any required BIOS changes for

your expansion card(s).

7. Install the driver provided with the expansion card in your operating system.

Installing and Removing a PCI Express x16 Graphics Card :

2

• Installing a Graphics Card:

Gently insert the graphics card into the PCI Express x16 slot.

Make sure the graphics card is locked by the latch at the end of

the PCI Express x16 slot.

• Removing the Card:

Push the latch at the end of the PCI Express x16 slot to release
the card and then pull the card straight up from the slot.

13

13

2-4 Install other Internal Connectors

Power Connectors

This motherboard uses an ATX power supply. In order not to damage any device, make sure all the
devices have been installed properly before applying the power supply.

24-pin ATX Power Connector : PWR1

2

PWR1 is the ATX power supply connector. Make sure that the power supply cable and pins are
properly aligned with the connector on the motherboard. Firmly plug the power supply cable into the
connector and make sure it is secure.

Pin # Denition Pin # Denition

1 3.3V 13 3.3V

2 3.3V 14 -12V

3 GND 15 GND

4 +5V 16 PS_ON(Soft On/Off)

5 GND 17 GND

6 +5V 18 GND

7 GND 19 GND

8 Power Good 20 NC

9 +5V SB(Stand by +5V) 21 +5V

24 13

12

PWR1

1

10 +12V 22 +5V

11 +12V 23 +5V

12 3.3V 24 GND

N

O

I

T

U

A

C

!

We recommend you using a 24-pin power supply.

If you are using a 20-pin power supply, you need
to align the ATX power connector according to
the picture.

20-Pin Power

4-pin ATX 12 V Power Connector : PWR2

Connect the 4-pin ATX 12V power supply to PWR2 and provides power to the CPU.

3 1

Pin # Denition

1 GND

+12V

4 2

GND

2 GND

3 +12V

4 +12V

PWR2

14

14

Pin No. 24

Audio Connector : F_AUDIO

The audio connector supports HD Audio standard. It
provides the Front Audio output choice.

S/PDIF OUT Connector : SPDIF_OUT

The connector is used for S/PDIF output.

USB Connectors : F_USB1_A/2_A/3_A

In addition to the USB ports on the rear panel, this
product also provides 10-pin USB headers on its
motherboard. By connecting through USB cables
with them, user can quickly expand another USB
ports on the front panel.

1

2

VCC

D­D+

GND

EMPTY

F_USB1_A/2_A/3_A

VCC
D­D+

GND
NC

10

9

PORT1_L
PORT1_R
PORT2_R

SENSE_SEND

PORT2_L

EMPTY

SPDIF_OUT

SPDIF_OUT

1

F_AUDIO

+5V

GND

2

AUD_GND

PRESENCEJ
SENSE1_RETURN
EMPTY
SENSE2_RETURN

109

1

2

3

4

2

Serial ATA Connectors : SATA_1/2/3/4/5/6

The Serial ATA connector is used to connect with
SATA Hard Disk or CD devices which support this
feature. The current Serial ATA II interface allows up
to 300MB/s data transfer rate.

Chassis Intruder Connector : INTR

The connector can be connected to a security
switch on the chassis. The system can detect
the chassis intrusion through the function of this
connector. If eventually the chassis is closed, the

system will send a message out.

CIR Connector : CIR

This connector support s infrared wireless tr ans­mitting and receiving device.

15

15

SATA_1/2/3/4/5/6

INTRUDERJ

1

INTR

1 2

+5V

EMPTY

IRRX

GND

IRTX

9 10

CIR

1

GND
TX+
TX­GND
RX­RX+

GND

GND

+5VSB

CIRRX

CIRTX

GND

EMPTY

TPM Connector (Optional): TPM

The TPM (Trusted Platform Module) provides the ability
to the PC to run applications more secure and to make
transactions and communication more trustworthy. To
utilize this function, you should purchase additional device
and install it.

2

Front Panel Connector : FP1

This motherboard includes one connector for connecting
the front panel switch and LED Indicators.

Hard Disk LED Connector (HDD-LED)

Connect to the chassis front panel IDE indicator LED. It
indicates the active status of the hard disks. This 2-pin
connector is directional with +/- sign.

Reset Switch (RESET-SW)

Attach the connector to the Reset switch on the front
panel of the case; the system will restart when the
switch is pressed.

Power LED Connector (PWR-LED)

Connect to the power LED indicator on the front panel
of the chassis. The Power LED indicates the system’s
status. When the system is in operation (S0 status),
the LED is on. When the system gets into sleep mode

(S1) , the LED is blinking; When the system is in S3/S4

sleep state or power off mode (S5), the LED is off. This
2-pin connector is directional with +/- sign.

Power Switch Connector (PWR-SW)

Connect to the power button on the front panel of the
chassis. Push this switch allows the system to be turned
on and off rather than using the power supply button.

LFRAMEn

LRESETn

LPCPDn

HDD-LED

RESET-SW

NC

LCLK

LAD3

VDD

LAD0
NC_1
NC_2

GND

+

-

1

9

FP1

1 2

19 20

TPM

2

10

+

PWR-LED

-

PWR-SW

EMPTY

GND

EMPTY

NC_3
LAD2

LAD1

GND

NC_4

SERIRQ
CLKRUNin

NC_5

COM Connector (Optional) : COM2

This motherboard supports one serial RS232 COM port for
legacy compatibility. User must purchase another RS232
cable with a 9-pin D-sub connector at one end to connect
with the external RS232 device and another end with 10-

pin female connector to connect with COM1 connector in
the motherboard.

16

16

RLSD

SOUT

GND

RTS

RI

1 2

109

COM2

SIN

DTR

DSR

CTS

EMPTY

Speaker Connector : SPEAKER

The speaker connector is used to connect speaker of
the chassis.

SPKJ

EMPTY

NC

SPKJ

SPEAKER

1

2

3

4

Fan Connectors : CPU_FAN, SYS_FAN

There are two main fan headers on this motherboard.
The fan speed can be controlled and monitored in “PC
Health Status” section of the BIOS Setup. These fans
can be automatically turned off after the system enters

S3, S4 and S5 sleeping states.

GND

1

POWER
SENSE
CONTROL

CPU_FAN/SYS_FAN

LPT Connector (Optional) : LPT

The connector supports parallel port which can be con­nected to a printer or a scanner. System usually assign
IRQ7 as it’s default interrupt request and the parallel
port has three operation mode: [SPP], [EPP], [ECP].

Strobe

Data it [0]
Data it [1]

Data it [2]

Data it [3]

Data it [4]

Data it [5]
Data it [6]

Data it [7]

ACK
Busy

Paper End

Select

1 2

LPT

2625

Auto Feed
Error
INIT

SLCT IN
Ground
Ground
Ground
Ground
Ground
Ground
Ground
Ground
Empty

2

17

17

2-5 Jumpers

For some features needed, users can change the jumper settings on this motherboard to modify them.
This section explains how to use the various functions of this motherboard by changing the jumper
settings. Users should read the following content carefully prior to modifying any jumper setting.

Description of Jumpers

1. For any jumper on this motherboard, pin 1 can be identied by the bold silkscreen next to it.

2

However, in this manual, pin 1 is simply labeled as “1”.

2. The following table explains different types of the jumper settings. "Closed" means placing a jumper

cap on the two pins to temporarily short them. The shorting can also be done by touching two

pins by a screwdriver for a few seconds, but using jumper cap is recommended. It can prevent

hazardous ESD (Electrical Static Discharge) problem.

Clear CMOS Jumper: CLR_CMOS

The motherboard uses CMOS RAM to store the basic hardware information (such as BIOS data,
date, time information, hardware password... etc.). Clear CMOS data is the fast way to go back to

factory default when the BIOS settings were mistakenly modied.

The steps to clear CMOS data are :

1. Turn off the computer, unplug the power cord from the power outlet.

2. Remove jumper cap from pins 2-3, put it onto pins 1-2 to short them. This will clear CMOS

3. Return the setting to its original with pins 2-3 closed.

4. Plug in the power cord to your computer and turn it on.

5. Go to BIOS Setup to congure new system as described in next chapter.

Jumper Diagram Denition Description

1

1

1

1-2 Set Pin 1 and Pin 2 closed

2-3 Set Pin 2 and Pin 3 closed

data.

Clear

Normal
(Default)

3

2

1

3

2

1

CLR_CMOS

I

N

N

G

R

A

!

W

■ Disconnect the power cable before adjusting the jumper settings.

■ Do not clear the CMOS while the system is turned on.

18

18

Intel® ME Jumper: MFG

This motherboard uses MFG jumper to enable or disable Intel® Management Engine function.
Intel® Management Engine (ME) is an embedded microcontroller located in Intel chipset. It
provides latest IT management features such as Intel® AMT, that allows to improve management
of corporate assets.
Set the jumper to pins 1-2, you can enable the Intel® Management Engine function.
Set the jumper to pins 2-3, you can disable the Intel® Management Engine function.

2

Enable
(Default)

Disable

1

2

3

1

2

3

MFG

N

O

I

T

U

A

C

!

Before ashing BIOS ROM, you need to set MFG jumper to pins 2-3 rst.

19

19

This chapter tells how to change system settings through

the BIOS Setup menus. Detailed descriptions of the BIOS

parameters are also provided.

You have to run the Setup Program when the following cases

occur :

1. An error message appears on the screen during the system

Power On Self Test (POST) process.

2. You want to change the default CMOS settings.

This chapter includes the following information :

■ Enter BIOS Setup

■ Main Menu

■ System Information

■ Advanced BIOS Features

■ Fox Central Control Unit

■ Advanced Chipset Features

■ Integrated Peripherals

■ Power Management Setup

■ PC Health Status

■ BIOS Security Features

■ Load Optimal Defaults

■ Save & Exit Setup

■ Exit Without Saving

Since BIOS could be updated some other times, the BIOS information described

in this manual is for reference only. We do not guarantee the content of this

manual will remain consistent with the newly released BIOS at any given time in

the future. Please visit our website for updated manual if it is available.

Enter BIOS Setup

The BIOS is the communication bridge between hardware and software, correctly setting up the
BIOS parameters is critical to maintain optimal system performance. Power on the computer,
when the message "Press <DEL> to enter Setup, <ESC> to boot menu" appears at the bottom
of the screen, you can press <DEL> key to enter Setup.

N

O

I

T

U

A

C

!

We do not suggest that you change the default values in the BIOS Setup, and we
shall not be responsible for any damage which resulted from the change you made.

Main Menu

The main menu allows you to select from a list of setup functions together with two exit choices.

Use the arrow keys to select a specic item and press <Enter> to go to the sub-menu.

Each item in the main menu is explained below:

CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc.

► System Information ► PC Health Status

► System Information

► Advanced BIOS Features ► BIOS Security Features

► Fox Central Control Unit Load Optimal Defaults

► Advanced Chipset Features Save & Exit Setup

► Integrated Peripherals Exit Without Saving

► Power Management Setup

3

↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help

F9:Optimized Defaults

Configure Time and Date. Display System Information...

v02.67 (c) Copyright 1985-2009, American Megatrends, Inc.

► System Information

It displays the basic system conguration, such as BIOS Version, memory size plus system

date, time and Floppy drive. They all can be viewed or set up through this menu.

► Advanced BIOS Features

The advanced system features can be set up through this menu. There are boot up settings.

► Fox Central Control Unit

Some special proprietary features (such as overclocking) can be set up through this menu.

► Advanced Chipset Features

The values for the chipset can be changed through this menu, and the system performance

can be optimized.

► Integrated Peripherals

All onboard peripherals can be set up through this menu. There are IDE devices, Super I/O

devices such as Serial I/O and other USB devices... etc.

21

► Power Management Setup

All the items related with Green function features can be set up through this menu.

► PC Health Status

This setup enables you to read/change Fan speeds, and displays temperatures and voltages

of your CPU/System.

► BIOS Security Features

The Supervisor/User password can be set up through this menu to prevent unauthorized use

of your computer. If you set a password, the system will ask you to key in correct password

before boot or access to Setup.

► Load Optimal Defaults

The optimal performance settings can be loaded through this menu. However, it may offer bet-

3

ter performance in some ways (such as less I/O cards, less memory ...etc.), still, it may cause

problem if you have more memory or I/O cards installed. It means, if your system loading is

heavy, set to optimal default may sometimes come out an unstable system. What you need

now is to adjust BIOS setting one by one, trial and error, to nd out the best setting for your

current system.

► Save & Exit Setup

Save setting values to CMOS and exit.

► Exit Without Saving

Do not change anything and exit the setup.

22

System Information

This sub-menu is used to set up the standard BIOS features, such as the date, time, memory and

so on. Use the arrow up/down keys to select an item, then use the <+> or <-> keys to change the

setting.

CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc.

System Information

System Time [15 : 40 : 49] Help Item

System Date [Mon , 03/15/2010]
Use [Enter], [TAB]

► SATA 1
► SATA 2 [Not Detected]
► SATA 3 [Not Detected]
► SATA 4 [Not Detected]
► SATA 5 [Not Detected]
► SATA 6

[All Errors, But ...]

Halt On
Keyboard [Disabled]
Mouse [Disabled]
Model Name : H55M

BIOS Version : A21F1D02
Memory : 512MB
MAC Address : 0C-EE-E6-FE-F7-D5

↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help

F9:Optimized Defaults

► System Time

This item allows you to congure the desired time. Use [ENTER], [TAB] or [SHIFT-TAB] to

select a eld. Use [+] or [-] to input the value.

The three elds of the setting are <hour> : <minute> : <second> respectively.

► System Date

<weekday><month><date> <year> format.

Day—weekday from Sun. to Sat., this message is automatically displayed by BIOS (Read

Only).

Month—month from 1 to 12.

Date—date from 1 to 31.

Year—year, set up by users.

Use [ENTER], [TAB] or [SHIFT-TAB] to select a eld. Use [+] or [-] to input the value.

► SATA 1/2/3/4/5/6

While entering setup, BIOS automatically detects the presence of SATA devices. This item

displays the drive information of SATA devices.

► Halt On

This category determines whether or not the computer will stop if an error is detected during

powering up.

[All Errors] : All errors can result in system halt.

[All Errors But...] : All errors but keyboard or mouse can result in system halt. The halt condi-

tion can be enabled/disabled in the next three settings.

► Keyboard

The system boot will not stop for a keyboard error if you enabled this item.

► Mouse

The system boot will not stop for a mouse error if you enabled this item.

► Model Name

09

[Not Detected] or [SHIFT-TAB] to

[Not Detected]

select a eld.

Use [+] or [-] to

congure system time.

23

3

Model name of this product.

► BIOS Version

It displays the current BIOS version. User can check this information and discuss with the eld

service people if a BIOS upgrade is needed.

► Memory

This item displays the current memory size. The size is depending on how many memory mod-

ules were installed in your system before powering on.

► MAC Address

This item shows the onboard LAN MAC address.

3

24

Advanced BIOS Features

CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc.
Advanced BIOS Features

Quick Boot Help Item
Quiet Boot [Enabled]
Bootup Num-Lock [On]

PCI Latency Timer [64]
► Intel VT-d Conguration
► Trusted Computing [Press Enter]

[Enabled]

[Press Enter]

Allows BIOS to skip
certain tests while
booting. This will
decrease the time
needed to boot the
system.

↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help

F9:Optimized Defaults

► Quick Boot

While Enabled, this option allows BIOS to skip certain tests while booting, this will shorten the

time needed to boot the system.

► Quiet Boot

This item is used to enable/disable the quiet boot.

[Disabled] : Displays the normal POST messages.

[Enabled] : Displays OEM customer logo instead of POST messages.

► Bootup Num-Lock

This item denes if the keyboard Num Lock key is active when your system is started. The

available settings are: On (default) and Off.

► PCI Latency Timer

This item is used to set the value in units of PCI clocks for PCI device latency timer register.

► Intel VT-d Conguration/Trusted Computing

Press <Enter> to go to relative submenu.

3

25

Intel VT-d Conguration

CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc.

Intel VT-d Conguration

Help Item
Intel VT-d

Disabled

Enabled

[Disabled]

Options

3

↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help

F9:Optimized Defaults

► Intel VT-d

Intel® Virtualization Technology for Directed I/O (VT-d) can improve performance of I/O de-

vices in virtualized environment. This item is used to enable/disable the VT-d feature.

Trusted Computing

CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc.

Trusted Computing

TCG/TPM Support Enable/Disable TPM
TCG (TPM 1.1/1.2) supp
in BIOS

Trusted Computing

Help Item

[No]

↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help

F9:Optimized Defaults

► TCG/TPM Support (Optional)

Trusted Computing Group (TCG) members develop and promote open, vendor-neutral,

industry standard specications for trusted computing building blocks and software interfaces

across multiple platforms

TPM (Trusted Platform Module) is a specication promoted by TCG. A Trusted Platform Mod-

ule offers facilities for secure generation of cryptographic keys.

The TPM Work Group is chartered to create the Trusted Platform Module (TPM) specication.

26

The denition of the TPM architecture comes from the TC and the TPM Work Group denes

the implementation of that architecture. Work group members should have a working knowl-

edge of security in relation to the design and usage of cryptographic modules. Members

should also have a working knowledge of cryptographic techniques including public-key cryp-

tography, cryptographic algorithms and protocols.

This item is used to enable/disable the function of TCG/TPM support.

3

27

Fox Central Control Unit

3

► CPU Configuration

Press <Enter> to go to relative submenu.

► CPU Clock

This item is used to adjust the CPU Clock.

► Ratio CMOS Setting

This item is used to set the ratio between CPU Core Clock and the FSB Frequency. You can

use [+] or [-] to adjust the value.

► Adjust VTT Voltage

This item is used to set the CPU VTT voltage.

► DRAM Frequency

This item is used to adjust the memory speed. Select [Auto] for SPD enable mode. You can

select a value manually such as [800 MHz], [1067 MHz], [1333MHz] and [1600MHz].

► Memory Timing by SPD

This item is used to enable/disable provision of DRAM timing by SPD device. The Serial

Presence Detect (SPD) device is a small EEPROM chip, mounted on a memory module. It

contains important information about the module's speed, size, addressing mode and various

other parameters, so that the motherboard memory controller (chipset) can better access the

memory device.

Select [Auto] for SPD enable mode.

Select [Manual] to set the parameters by yourself.

The following 10 settings are valid only when the Memory Timing by SPD is set to [Manual].

► DRAM tCL

The number of memory clocks it takes a DRAM to return data after the read CAS_L is assert-

ed depends on the memory clock frequency. The value that BIOS programs into the memory

controller is a function of the target clock frequency. The target clock frequency is determined

from the supported CAS latencies at given clock frequencies of each DIMM.

► DRAM tRAS (Active-to-Precharge Delay)

This item allows you to set the minimum RAS# active time (in clock cycles).

CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc.
Fox Central Control Unit

► CPU Conguration

CPU Clock [133]

Ratio CMOS Setting [22]
Adjust VTT Voltage [Default]

Ratio Status: Unlocked (Min:09, Max:22)

Ratio Actual Value:22

Current CPU Speed : 2.936GHz

DRAM Frequency [Auto]
Memory Timing by SPD [Auto]
Adjust DRAM Voltage [Default]
Current DRAM Speed :800MHz

↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help

F9:Optimized Defaults

[Press Enter] Help Item

[Press Enter]

Congure CPU.

28

► DRAM tRP (Precharge Command Period)

This item allows you to select the row precharge time (in clock cycles).

► DRAM tRCD (RAS-to-CAS Delay)

This item allows you to select a delay time (in clock cycles) between the CAS# and RAS#

strobe signals.

► DRAM tWR (Write Recovery)

This item allows you to select the write recovery time (in clock cycles).

► DRAM tRFC(Auto-Refresh-to-Active/Auto-Refresh Command Period)

Refresh to Refresh or Refresh to Active command interval.

► DRAM tWTR (Internal Write to Read Command Delay)

This item allows you to select a delay time (in clock cycles) between sending the last data

from a write operation to the memory and issuing a read command.

► DRAM tRRD (Active-to-Active of a Different Bank)

This item allows you to select a delay time (in clock cycles) between the RAS# and RAS#

strobe signals.

► DRAM tRTP (Internal Read to Precharge Command Delay)

This item allows you to set the delay time (in clock cycles) between read command and pre-

charge command.

► DRAM tFAW(Four Active Window Delay)

Species the time window in which four activates are allowed the same rank.

► Adjust DRAM Voltage

This item is used to change the memory voltage.

3

29

CPU Conguration

CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc.

CPU Conguration

Module Version : 01.08

Congure CPU EIST

Manufacturer : Intel and C-state

Intel(R) Core(TM) i3 CPU 530 @ 2.93GHz function .
Frequency :2.93GHz
BCLK Speed :133MHz
Cache L1 :128 KB
Cache L2 :512 KB

Cache L3 :4096 KB

3

► Intel PPM Conguration
C1E Support [Enabled]
MPS and ACPI MADT ordering [Modern ordering]

Limit CPUID MaxVal [Disabled]

Virtualization Technology [Enabled]
Execute Disable Bit [Enabled]
Intel(R) HT Technology [Enabled]
Active Processor Cores [All]

↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help

F9:Optimized Defaults

► Intel PPM Configuration

Press <Enter> to go to relative submenu.

► C1E Support (Appears only when CPU supports)

C1E represents Enhanced HALT State. It is a feature which CPU uses to reduce power

consumption when in halt state. C1E drops the CPU’s multiplier and voltage to lower levels

when a HLT (halt) command is issued. This item is used to enable/disable the C1E support.

► MPS and ACPI MADT ordering

[Modern ordering] : for Windows XP or later OSes.

[Legacy ordering] : for Windows 2000 or earlier OSes.

► Limit CPUID MaxVal

This item is used to enable or disable CPUID maximum value limit conguration. Set [Disa-

bled] for WinXP.

► Virtualization Technology

Virtualization (i.e. Intel® Vanderpool Technology) allows a platform to run multiple operating

systems and applications in independent partitions or “containers.” One physical compute

system can function as multiple “virtual” systems. Vanderpool Technology can help improve

future virtualization solutions. This item will be displayed only when the CPU is supporting this

feature and the setting is used to enable/disable it.

► Execute Disable Bit

This item is used to enable/disable the Execute Disable Bit feature.

Intel's Execute Disable Bit functionality can help prevent certain classes of malicious buffer

overow attacks when combined with a supporting operating system.

Execute Disable Bit allows the processor to classify areas in memory by where application

code can execute and where it cannot. When a malicious worm attempts to insert code in the

buffer, the processor disables code execution, preventing damage and worm propagation.

Replacing older computers with Execute Disable Bit-enabled systems can halt worm attacks,

reducing the need for virus-related repairs. By combining Execute Disable Bit with anti-virus,

rewall, spyware removal, e-mail ltering software, and other network security measures, IT

managers can free IT resources for other initiatives.

CPU Conguration

Help Item

[Press Enter]

30

► Intel(R) HT Technology

This item is used to enable/disable the Hyper Threading Technology feature.

► Active Processor Cores

This item is used to set the number of cores to enable in each processor package.

Intel PPM Conguration

CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc.

Intel PPM Conguration

EIST Function [Enabled]
Intel(R) TurboMode tech [Disabled]

↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help

F9:Optimized Defaults

Intel PPM Conguration

Help Item

[Enabled]

Disabled
Enabled

► EIST Function

You can select the EIST (Processor Power Management, PPM) through this item.

N

O

I

T

U

A

C

!

Enhanced Intel SpeedStep® technology (EIST) allows the system to dynamically adjust
processor voltage and core frequency, which can result in decreased average power
consumption and decreased average heat production. There are some system require­ments must be met, including CPU, chipset, motherboard, BIOS and operation system.
Please refer to Intel Website for more information.

3

► Intel(R) TurboMode tech

Turbo mode allows processor cores to run faster than its marked frequency in specic condi-

tion.

31

Advanced Chipset Features

CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc.
Advanced Chipset Features

IMC Type : *Dale Family IMC Help Item

Management Engine Version : 6.0.30.1203

Memory Remap Feature [Disabled]
PCI MMIO Allocation: 4GB To 3328MB
Initate Graphic Adapter [PEG/PCI]

[Disabled]

ENABLE: Allow
remapping of
overlapped PCI memory
above the total
physical memory.

DISABLE: Do not allow
remapping of memory.

3

↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help

F9:Optimized Defaults

► Memory Remap Feature

This item is used to enable/disable memory remapping around memory hole.

PCI doesn't actually care much which addresses are used, but by convention the PC platform

puts them at the top of the 32-bit address space. For many years it wasn't possible or practical to

put that much RAM into a PC. But now it is, so it's up to the memory controller and host bridge to

gure out what to do. Many systems cause that high RAM to simply be ignored, resulting in the

loss of effective RAM. More complex systems will take the RAM that would occupy that 3.5-4GB

address space and re-map it into the 4.0-4.5GB address space. The RAM doesn't care because

it's just an array of storage cells, it's up to the memory controller to associate addresses with

those storage cells. Of course, that only works if you're using a 64-bit (or 32bit physical address

extension (PAE) enabled) OS that can deal with physical addresses larger than 32 bits. Once

this option is enabled, BIOS will display the true size of memory installed.

► Initate Graphic Adapter

This item is used to select which graphics controller is used as the primary boot device.

32

Integrated Peripherals

► IDE Configuration/OnBoard Configuration/SuperIO Configuration/USB Configuration

Press <Enter> to go to relative submenu.

IDE Conguration

CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc.
Integrated Peripherals

► IDE Conguration
► OnBoard Conguration
► SuperIO Conguration
► USB Conguration

↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help

F9:Optimized Defaults

CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc.

IDE Conguration

Congure SATA as [IDE] Help Item

SATA#1 IDE Configuration [Enhanced]

SATA#2 IDE Conguration

IDE Detect Time Out

[35]

[Press Enter]

[Press Enter] Help Item
[Press Enter]
[Press Enter] Congure the IDE
[Press Enter] Device(s).

[IDE]

[Enhanced]

Options

3

↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help

F9:Optimized Defaults

► Configure SATA as

This item is used to set the operation mode of your SATA ports 1, 2, 3, 4, 5, 6. Set to [IDE] can

congure the SATA ports to support IDE mode.

► SATA#1 IDE Configuration

SATA#1 are the SATA ports 1, 2, 3, 4 of the motherboard. This item allows you select the mode

of the SATA ports. Setting values are: [Compatible], [Enhanced].

► SATA#2 IDE Configuration

SATA#2 are the SATA ports 5,6 of the motherboard. This item allows you select the mode of

the SATA ports. Setting values are: [Disabled], [Enhanced].

33

► IDE Detect Time Out

This item is used to select the time out value for detecting ATA/ATAPI devices. If the checking

time is over the set value, the system will skip it.

OnBoard Conguration

3

► OnBoard Audio Controller

This item is used to enable or disable the HD Audio controller.

► OnBoard LAN Controller

This item is used to enable or disable the onboard LAN controller.

► OnBoard LAN Boot ROM

This item is used to enable or disable the onboard LAN boot optional ROM. A LAN boot ROM

lets you set up a diskless workstation on the network. By installing a boot ROM in the network

board, you can enable a client PC system on the network to be booted remotely.

CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc.

OnBoard Audio Controller Help Item
OnBoard LAN Controller [Enabled]
OnBoard LAN Boot ROM

Enabled
Disabled

↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help

F9:Optimized Defaults

OnBoard Conguration

[Enabled]

[Disabled]

Options

34

SuperIO Conguration

► Serial Port1 Address

This item is used to assign the I/O address and interrupt request(IRQ) for the onboard serial

port1.

► Serial Port2 Address

This item is used to assign the I/O address and interrupt request(IRQ) for the onboard serial

port2.

► Parallel Port Address

This item is used to assign the I/O address and interrupt request(IRQ) for the onboard parallel

port.

► Parallel Port Mode

This item is used to select the operation modes for the onboard parallel (or Printer) port. They

are [Normal] (default), [EPP], [ECP] and [ECP+EPP].

► Parallel Port IRQ

This item is used to assign interrupt request(IRQ) for the onboard parallel port.

► OnBoard CIR Port

This item enables you to determine the transfer mode of the onboard infrared chip.

CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc.

SuperIO Conguration

Serial Port1 Address Allows BIOS to Select
Serial Port2 Address [2F8/IRQ3] Serial Port1 Base.
Parallel Port Address [378] Addresses
Parallel Port Mode [Normal]

Parallel Port IRQ [IRQ7]

OnBoard CIR Port [Disabled]

↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help

F9:Optimized Defaults

SuperIO Conguration

Help Item

[3F8/IRQ4]

3

35

USB Conguration

3

► Legacy USB Support

This item is used to enable the support for USB devices on legacy OS. If you have a USB

keyboard or mouse, set to auto or enabled.

► USB 2.0 Controller Mode

This item is used to set the transmission rate mode of USB 2.0. The available settings are :

[HiSpeed] in 480Mbps; [Full Speed] in 12Mbps.

► BIOS EHCI Hand-Off

Windows XP supports a number of features in the Enhanced Host Controller Interface (EHCI)

specication, but there are a few features that are not implemented. Microsoft said preliminary

support for EHCI BIOS handoff will be available in Windows XP SP2.

This item allows you to enable support for OS without EHCI hand-off feature.

This is a workaround for OS without EHCI hand-Off support .

The EHCI ownership change should claim by EHCI driver.

► Legacy USB1.1 HC Support

This item is used to enable the support for USB devices on legacy OS. If you have a USB

keyboard or mouse, set to auto or enabled.

CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc.

USB Conguration Help Item

Module Version - 2.24.5-13.4

USB Devices Enabled :

2 Hubs

Legacy USB Support

USB 2.0 Controller Mode [HiSpeed]

BIOS EHCI Hand-Off [Enabled]
Legacy USB1.1 HC Support [Enabled]

↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help

F9:Optimized Defaults

USB Conguration

[Enabled]

Enables support for
legacy USB. AUTO
option disables
legacy support if
no USB devices are
connected.

36

Power Management Setup

CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc.
Power Management Setup

HPET Help Item
ACPI Suspend Type [S3 (STR)]
Energy -using Products [Enabled] Enable / Disable
USB Device Wakeup From S3 [Enabled]
Resume by PCIE PME [Enabled]
Resume by PCI Card [Enabled]
Resume by PS2 Keyboard [Enabled]

Resume by PS2 Mouse [Enabled]

Resume by RTC [Disabled]

↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help

F9:Optimized Defaults

ACPI (Advanced Conguration and Power Interface) is an open industry standard interfaces

enabling OS-directed conguration, power management, and thermal management of mobile,

desktop, and server platforms. It denes ve sleeping states, they are :

S1 - The S1 sleeping state is a low wake latency sleeping state. In this state, no system

context is lost (CPU or chip set) and hardware maintains all system context. (also called

Power On Suspend)

S2 - The S2 sleeping state is a low wake latency sleeping state. This state is similar to the S1

sleeping state except that the CPU and system cache context is lost (the OS is respon-

sible for maintaining the caches and CPU context). Control starts from the processor’s

reset vector after the wake event.

S3 - The S3 sleeping state is a low wake latency sleeping state where all system context is lost

except system memory. CPU, cache, and chip set context are lost in this state. Hardware

maintains memory context and restores some CPU and L2 conguration context. Control

starts from the processor’s reset vector after the wake event. (also called Suspend to

RAM)

S4 - The S4 sleeping state is the lowest power, longest wake latency sleeping state supported

by ACPI. In order to reduce power to a minimum, it is assumed that the hardware platform

has powered off all devices. Platform context is maintained. (also called Suspend to

Disk)

S5 - The S5 state is similar to the S4 state except that the OS does not save any context. The

system is in the “soft” off state and requires a complete boot when it wakes. Software

uses a different state value to distinguish between the S5 state and the S4 state to allow

for initial boot operations within the BIOS to distinguish whether or not the boot is going to

wake from a saved memory image.

[Enabled]

3

37

► HPET

HPET stands for High Precision Even Timer. If you have the HPET disabled, then windows

does not have access to it and therefore falls back to less accurate timing methods. This item

is used to enable or disable the HPET Support.

► ACPI Suspend Type

This item is used to set the energy saving mode of the ACPI function. When you select “S1

(POS)” mode, the power is always on and computer can be resumed at any time. When

you select “S3 (STR)” mode, the power will be down after a period of time. The status of the

computer before it entering STR will be saved in memory, and the computer can quickly return

to previous state when the STR function wakes.

3

When you select “Auto”, it means OS will automatically take care and assign which mode is

the most suitable now.

► Energy Using Product

This item is used to enable/disable the EUP(Energy Using Product) feature. When enable,

the suspend power of the chipset will be cut off in S4/S5 suspend mode in order to reduce the

power consumption of motherboard; when disable, the suspend power is always on.

► USB Device Wakeup From S3

This item is used to wake up the system by a USB device when it is staying at S3 state.

► Resume by PCIE PME

This item is used to enable/disable the PCI Express device to generate a wake up.

► Resume by PCI Card

This item is used to enable/disable the PCI card to generate a wake up.

► Resume by PS2 Keyboard

This item is used to enable/disable the PS2 keyboard to generate a wake up.

► Resume by PS2 Mouse

This item is used to enable/disable the PS2 mouse to generate a wake up.

► Resume by RTC

This item is used to enable/disable RTC alarm event to generate a wake up.

RTC is system real time clock.

► RTC Alarm Date(Days)

When Resume by RTC is enabled, select a specic date to generate a wake up.

► RTC Alarm Time(HH:MM:SS)

When Resume by RTC is enabled, select a specic time to generate a wake up.

38

PC Health Status

► Warning Temperature

This option is used to set the warning temperature for the system. When the temperature of

CPU is higher than the set value, the motherboard will send out warning information.

► Shutdown Temperature

This item is used to set the system temperature upper limit. When the temperature exceeds

the set value, the system will shut down automatically.

This function works only when your operating system is supporting ACPI.

► Case Open Warning

This item is used to enable or disable case open warning function.

► CPU/System Temperature

The CPU/System temperature are automatically detected and displayed by the system.

► CPU/System Fan Speed

The CPU/System fan speed are automatically detected and displayed by the system.

► CPU Core/DRAM Voltage/+3.30V/+5.00V/+12.0V

The current voltages are automatically detected and displayed by the system.

► CPU Smart Fan/System Smart Fan Control

This option is used to enable or disable smart fan function.

The following 4 settings are valid only when Smart Fan Control is set to [Enabled].

► Fan OFF Temperature

It allows you set a temperature value from which smart fan stops its operation.

► PWM Start Temperature

It allows you set a temperature value from which smart fan starts its operation.

► Start PWM Value

It allows you to set an initial PWM value to drive the fan when the temperature reaches Start

value and smart fan begins its operation. The higher PWM value can achieve the faster fan

speed.

► Slope PWM Value

The slope controls the PWM value being stepped up or down versus temperature changes

CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc.

Warning Temperature [Disabled] Help Item
Shutdown Temperature [Disabled]
Case Open Warning [Disabled]
CPU Temperature :32 oC/89 oF
System Temperature :27 oC/80 oF

CPU Fan Speed :2109 RPM
System Fan Speed :N/A

CPU Core :1.152 V
DRAM Voltage :1.596 V

+3.30V :3.264 V

+5.00V :4.858 V
+12.0V :12.513V
CPU Smart Fan Control [Disabled]
System Smart Fan Control [Disabled]

↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help

F9:Optimized Defaults

PC Health Status

[Disabled]

Options

3

39

BIOS Security Features

CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.

Security Settings

Supervisor Password : Not Installed Install or change the
User Password : Not Installed password.

Change Supervisor Password [Press Enter]
Change User Password

3

↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help

F9:Optimized Defaults

BIOS Security Features

Help Item

[Press Enter]

[Press Enter]

► Change Supervisor Password

This item is used to install or change supervisor password.

After you input Supervisor password, it then will ask you to input

user password optionally.

► Change User Password

This item is used to install or change user password.

Enter New Password :

40

Load Optimal Defaults

Optimal defaults are the best settings of this motherboard. Always load
the Optimal defaults after updating the BIOS or after clearing the CMOS
values.
Select this option and press Enter, it will pop out a dialogue box to let you
load the defaults. Select <OK> and then press <Enter> to load the defaults.
Select <Cancel> and press <Enter>, it will not load.
By this default, BIOS have set the optimal performance parameters of system to improve the
performances of system components. But if the optimal performance parameters to be set cannot
be supported by your hardware devices (for example, too many expansion cards were installed),
the system might fail to work.

Load Optimal Defaults?

[OK]

[OK] [Cancel]

3

Save & Exit Setup

When you select this option and press <Enter>, a message
will be displayed in the center of the screen:
Select [OK] to save your changes to CMOS and exit the pro­gram, select [Cancel] or <ESC> to return to the main menu.

Save configuration changes and exit setup?

Exit Without Saving

If you select this option and press <Enter>, the following message
will be displayed in the center of the screen:

Select [OK] to exit CMOS without saving your modications,

select [Cancel] or <ESC> to return to the main menu.

[OK] [Cancel]

[OK]

Discard changes and exit setup?

[OK]

[OK] [Cancel]

41

The utility CD that came with the motherboard contains useful

software and several utility drivers that enhance the motherboard

features.

This chapter includes the following information:

■ Utility CD content

■ Install driver and utility

■ FOX ONE

■ FOX LiveUpdate

■ FOX LOGO

■ FOX DMI

Note : Because each module is independent, so the section number

will be reorganized and unique to each module, please understand.

Utility CD content

This motherboard comes with one Utility CD. You can simply put it into your CD/DVD-ROM drive,
and the main menu will be displayed on your PC screen to guide you how to install.

1. Install Driver

Use these options to install all the drivers for your system. You should install the drivers in order,
and you need to restart your computer after all the drivers have been installed.

A. Intel Chipset Driver
B. Realtek HDA Audio Driver
C. Realtek LAN Driver
D. Intel VGA Driver
E. Intel Management Engine Driver

2. Software Utilities

Use these options to install additional software programs. FOX ONE is a very powerful user inter­face program which allows you to change your system setting without going to BIOS. Some auto
features help user to improve (or overclock) your system without being a computer literate.

A. FOX ONE
B. FOX LiveUpdate
C. FOX LOGO
D. FOX DMI
E. Microsoft DirectX 9.0*
F. Adobe Acrobat Reader
G. Norton Internet Security

1

4

*1 : This item will appear in Windows XP operation system, but will not be shown in Windows Vista
and Windows 7 operation system.

43

43

Install driver and utility

1. Install Driver

You must click "Intel Chipset Driver" to install it rst. After that, you can click "One Click Setup" to

install all the other drivers left, or you can click on each individual driver to install it manually.

Manual Instal­lation Step by
Step

4

Click to visit

Foxconn's

website

2. Install Utility

You can select the specic utility to install.

Select

to Install

Utilities

Select

to Install

Drivers

Browse CD

Automatic
Installation by
One Click.

Exit the

program

Drop to

System Tray

44

44

FOX ONE

FOX ONE is a powerful utility for easily modifying system settings. It also allows users

to monitor various temperature values, voltage values, frequencies and fan speeds at

any time.

With FOX ONE, you can :

■ Modify system performance settings, such as the CPU and memory bus speeds,

CPU voltages, fan speeds, and other system performance options.

■ Monitor hardware temperatures, voltages, frequencies and fan speeds.

N

O

I

T

U

A

C

!

Depending on hardware support, voltage monitoring and Fox Intelligent Stepping
features are optional and only supported in some models. If the option is selectable,
it also means the feature is supported.

■ Voltage Monitoring is supported only in FOX ONE Premium & Deluxe products.

■ Fox Intelligent Stepping is supported only in FOX ONE Deluxe products.

Supporting Operating Systems :

■ Windows 2000 ■ Windows XP (32-bit and 64-bit)

■ Windows 2003 (32-bit and 64-bit) ■ Windows Vista (32-bit and 64-bit)

■ Windows 7 (32-bit and 64-bit)

Using FOX ONE :

The very rst time you run FOX ONE, F.I.S. Calibration function (FOX Intelligent

Stepping) will require you to calibrate the CPU’s loading. Click “OK” to proceed

and start the Utility. F.I.S. is a feature of FOX ONE, which can automatically adjust your

CPU clock based on your current system loading.

4

N

O

I

T

U

A

C

!

Before you running the FOX ONE program, the system parameters (such as CPU

clock, voltage...etc.) are controlled by BIOS settings. After you run FOX ONE, it will

take over, and the controlling right will be transferred to FOX ONE. Later, if you exit

FOX ONE, then BIOS control will be back again.

45

45

1. Main Page

Show CPU

Information

Toolbar

4

Monitor Frequency/Voltage/Fan

speed/Temperature value

Toolbar

Use the toolbar to navigate to other pages.

Alert Lamp

Switch Button

Skin Button

Exit

Minimum

Conguration

Homepage

Alert Lamp

When the system is in healthy state, the color of alert lamp is green. When the system

is in abnormal state, the alert lamp color is red.

Switch Button

Click this button, it will simplify the whole FOX ONE control panel to a smaller

information bar (i.e. Simple Mode) as depicted below, you can drag this bar to any

place on your screen to help you monitoring system status.

Exit FOX ONE

Click here will drop the FOX ONE to Windows system tray

Click here to go back to

FOX ONE full screen

46

46

Skin Button

There are more choices of FOX ONE screen panels. Click this button, you can select

your favorite skin (FOX ONE Panel).

Click the new skin

picture to select

the new skin

Apply the changes

Cancel the changes

Exit

Click this button to exit the program.

Minimum

Click this button to drop the FOX ONE to Windows system tray located at the lower

right corner of your screen.

Homepage

Click this button to visit Foxconn motherboard website :

http://www.foxconnchannel.com

4

47

47

Conguration

This menu allows you to congure :

1). Monitor interval (ms) :

This is to dene the interval of different messages of system settings which are to

be displayed on Simple Mode screen. Minimum value is 1 second.

4

2). Simple Mode :

To select which message of system settings are to be displayed in the Simple

Mode. Messages such as CPU frequency, voltage...etc., they can be displayed one

by one in Simple Mode.

3). F.I.S. Calibration (FOX Intelligent Stepping, Optional)

This function will re-calibrate the CPU's loading, and it may take several minutes

to proceed. The FOX ONE calibration process will apply different loadings to

your CPU, record PWM IC voltage together with the CPU clock running at these

loadings, so it can dene and estimate within a particular range of system loading,

what the CPU clock should be.

48

48

Step 1 : Click Calibration icon, a message pops out to ask for continue. Select Yes.

Step 2 : After data is collected, it will ask you to restart your computer now.

4

Later on, when the FOX ONE program is activated, and F.I.S. feature (in CPU

Page) is also enabled, FOX ONE will automatically adjust your CPU clock

according to your system loadings. (Loadings are like Power Gaming, Data

Mining...etc.)

49

49

2. CPU Page - CPU Control

This page lets you select (or overclock) CPU clock to meet the current performance

level of the system. The fastest and suitable CPU clock running for current system can

be calculated by FOX ONE automatically or manually input by yourselves.

Manual :

You can press the up/down button to adjust your CPU clock.

Auto :

Click this button to let FOX ONE check the highest CPU clock you can use. System

will raise the CPU clock step by step until it hangs, you can then push the RESET

button on your PC panel to restart the system. When system restarts, run FOX ONE

again, it will display a recommended highest CPU clock for you, click <Yes> to apply it.

4

Go to CPU page

Reset the

changes

Adjust by manual

FIS Features :

Select the different

benchmarks

Press Auto button to let FOX

ONE check the highest CPU

clock you can use.

Apply the

changes

A message informs you to

push RESET button later if

the system hangs nally.

Click Yes to continue.

50

50

You can see the system is

raising CPU clock until the

system hangs.

Push RESET button on the

front panel of your system to

restart the computer.

Run FOX ONE program

again, it will inform you

the previous test found

that 255MHz is the

recommended CPU clock for

your system.

Click Yes to apply it to your

system.

4

51

51

Now, your system is running

at a CPU clock of 255MHz.

FOX Intelligent Stepping (F.I.S., Optional)

Select FOX Intelligent Stepping will allow your system to automatically adjust your

CPU clock rate based on different system loadings. For example, if you select Power

Gaming, CPU clock will be driven to run at its maximum speed. While in Energy

Saving, CPU will lower down its speed to a minimum. The four benchmarks - Power

Gaming, Data Mining, Ofce and Energy Saving, the references of their system

loading were calculated and dened in the FIS Calibration option of Conguration

menu. Select Auto, CPU will automatically adjust its clock according to current system

loading.

4

3. Frequency Page - Frequency Control

This page lets you set memory and PCI Express frequencies by manual.

Go to Freq. page

Close this page

Select the option

you want to set

Adjust by manual

Reset the changes

Apply the changes

52

52

4. Limit Setting

4.1 Limit Setting - CPU Temperature

This page lets you to set CPU high limit temperature and enable the alert function.

Go to Limit

Setting page

Show current CPU

temperature value

Enable alert function

when the CPU

temperature is higher

than high limit value

Show current high

limit value of the CPU

temperature

Set high limit by

dragging the lever

4.2 Limit Setting - System Temperature

This page lets you to set system high limit temperature and enable the alert function.

Show current system

temperature value

4

Set high limit by

dragging the lever

53

53

Enable alert function

when the system

temperature is higher

than high limit value

Show current high

limit value of system

temperature

4.3 Limit Setting - CPU Fan

This page lets you to set CPU fan low limit rpm and enable the alert function.

Show current CPU

fan rpm value

Enable alert function

when the CPU fan runs

slower than the low

limit rpm value

4

Set low limit rpm by

dragging the lever

Show current low limit

rpm value of CPU fan

4.4 Limit Setting - System Fan

This page lets you to set system fan low limit rpm and enable the alert function.

Show current system

fan rpm value

54

54

Enable alert function

when the system fan

runs slower than low

limit rpm value

Show current low limit

rpm value of system

fan

Set low limit rpm by

dragging the lever

4.5 Limit Setting - FAN1 Fan

This page lets you to set FAN1 fan low limit rpm and enable the alert function.

Show current FAN1

fan rpm value

Enable alert function

when the FAN1 fan

runs slower than low

limit rpm value

Show current low limit

rpm value of FAN1 fan

Set low limit rpm by

dragging the lever

5. Voltage Page - Voltage Control (Optional)

This page lets you set CPU voltage, memory voltage and North Bridge voltage

manually. CPU voltage can be stepped up/down by a unit of 12.5mV, while memory is

0.05V/step, and North Bridge is 0.04V/step.

Go to Voltage page

Select the option

you want to set

4

Reset the changes

Adjust by manual

Apply the changes

55

55

6. Fan Page - Fan Control

This page lets you enable Smart Fan function or set the fan speed by manual.

When Smart Fan is selected, you must use a 4-pin CPU cooler in your system.

Go to Fan page

Enable or disable

smart fan function

4

Apply the changes

Set fan speed by

dragging the lever

56

56

FOX LiveUpdate

FOX LiveUpdate is a useful utility to backup and update your system BIOS, drivers and utilities by

local or online.

Supporting Operating Systems :

■ Windows 2000

■ Windows XP (32-bit and 64-bit)

■ Windows 2003 (32-bit and 64-bit)

■ Windows Vista (32-bit and 64-bit)

■ Windows 7 (32-bit and 64-bit)

N

O

I

T

U

A

C

!

Please set the BIOS setting “BIOS Write Protect” or “Super BIOS Protect” to [Disabled]

when running this application.

Using FOX LiveUpdate :

1. Local Update

1-1 Local Update - BIOS Information

This page lets you know your system BIOS information.

4

Link to website

Toolbar

*** : please refer to the physical motherboard for detail.

57

57

Minimum

Exit

Show current

BIOS information

1-2 Local Update - Backup

This page can backup your system BIOS. You can click “Backup”, and key in a le name, then

click “Save” to nish the backup operation. The extension of this backup le is ".BIN" for Award

BIOS and ".ROM" for AMI BIOS. Default directory is "C:\Desktop\My Documents" in Windows XP

and "Documents" in Vista. Make sure you can remember the le name together with the directory

which it is stored, prevented that you may need them to recover your BIOS later.

Key in a BIOS name

4

Click here

1-3 Local Update - Update

This page helps you to update your BIOS from a local le. After click “Update”, An alert message

will be displayed to ensure if you really want to continue, click “Yes” to conrm. A setup wizard

will guide you to load a local BIOS le to nish the operation. You must remember from which

directory to load your new BIOS le (with an extension of ".BIN" for Award BIOS, ".ROM" for AMI

BIOS) before the setup wizard starts.

N

O

I

T

U

A

C

!

FOX LiveUpdate can automatically backup old BIOS before update. This feature can be

enabled in the "Congure-System" setup. Please refer to "Congure-System" section

for more detail. The default backup directory is C:\LiveUpdate_Temp, but the backup

le name will be automatically generated. It is hard to nd it out from a backup directory,

and we recommend you using Explorer to check date/time message of this backup le

to nd it out and write its name down to remember it.

58

58

2. Online Update

2-1 Online Update - Update BIOS

This page lets you update your system BIOS from Internet. Click “start”, it will search the new

BIOS from Internet. Then follow the wizard to nish the update operation.

Click here

Current information

Search new BIOS

from Internet

Select BIOS to update

Browse detailed

information

Update BIOS

4

Close the window

2-2 Online Update - Update Driver

This page lets you update your system drivers from Internet. Click “start”, it will search the new

drivers from Internet. Then follow the wizard to nish the update operation.

Click here

Current information

Search new drivers

from Internet

59

59

Select the driver to update

Browse detailed

information

Install the selected

driver

Close the window

4

2-3 Online Update - Update Utility

This page lets you update utilities from Internet. Click “start”, it will search the new utilities from

Internet. Then follow the wizard to nish the update operation.

Click here

Current information

Select the utility to update

60

60

Search new utilities

from Internet

Browse detailed

information

Install the selected

utility

Close the window

2-4 Online Update - Update All

This page lets you update your system drivers from Internet. Click “start”, it will search all new

BIOS/drivers/utilities from Internet. Then follow the wizard to nish the update operation.

Click here

Current information

Search all new BIOS/

drivers/utilities from

Internet

Browse detailed

BIOS information

Browse detailed

driver information

Browse detailed

utility information

4

Close the window

61

61

3. Congure

3-1 Congure - option

This page lets you set auto search options. After you enable the auto search function, FOX

LiveUpdate will start its searching from Internet and if any qualied item found, it will pop out a

message on the task bar to inform you to do the next step.

Click here

Set auto

search options

4

Set auto search

the latest

FOX LiveUpdate

Select search

which kind of

versions

Apply the changes

Double click on the icon as show below, you can see the detailed information.

Reset to default value

Double click here

62

62

When you enable "Auto Search FOX LiveUpdate", if your FOX LiveUpdate version is older, it will

auto search from internet and prompt you to install the new version.

Prompt you to

install the new

FOX LiveUpdate

3-2 Congure - System

This page lets you set the backup BIOS location and change different skin of the FOX LiveUpdate

utility.

4

Click here

Apply the changes

Set the location of

download les or

auto backup BIOS

Determine if the

FOX LiveUpdate

can auto run when

the system starts up

Reset to default value

63

63

3-3 Congure - Advance

This page lets you select to ash BIOS / Boot Block and clear CMOS. If you choose Flash Boot

Block, it means BIOS is not protective, and you must make sure the ash process is continuous

and without any interruption.

Click here

Select which BIOS ROM

to ash(Only available to

motherboard with backup

BIOS ROM )

Select to ash Boot Block

4

Select to clear CMOS

Apply the changes

N

O

I

T

U

A

C

!

We recommend that you had better keep the default setting unchanged to avoid any

Reset to default value

damage.

4. About & Help

This page shows some information about FOX LiveUpdate.

Click here

Show information about

FOX LiveUpdate

64

64

FOX LOGO

FOX LOGO is a simple and useful utility to backup, change and delete the boot time

Logo. The boot Logo is the image that appears on screen during POST (Power-On

Self-Test).

You can prepare a JPG image (1024x768) le, then use FOX LOGO to open it and

change the boot time Logo. Boot time Logo will be displayed if you enable the BIOS

"Quiet Boot" setting in "Advanced BIOS Features" menu.

Supporting Operating Systems :

■ Windows 2000

■ Windows XP (32-bit and 64-bit)

■ Windows 2003 (32-bit and 64-bit)

■ Windows Vista (32-bit and 64-bit)

■ Windows 7 (32-bit and 64-bit)

Using FOX LOGO:

Main Page

4

Main screen

Backup

Change

Delete

I

N

N

G

R

A

!

W

Exit

Minimize

Website

About

When you change Logo or delete current Logo, the system will ash BIOS le auto-

matically. During this time, please DO NOT shut down the application and the system,

or the motherboard will be damaged seriously.

65

65

FOX DMI

FOX DMI is a full Desktop Management Interface viewer, and it provides three DMI data

formats : Report, Data Fields and Memory Dump. Users can easily switch between the

TabCtrl. With DMI information, system maker can easily analyze and troubleshoot your

motherboard if there is any problem occurred.

Supporting Operating Systems :

■ Windows 2000

■ Windows XP (32-bit and 64-bit)

■ Windows 2003 (32-bit and 64-bit)

■ Windows Vista (32-bit and 64-bit)

4

■ Windows 7 (32-bit and 64-bit)

Using FOX DMI:

Please operate this utility as the comments shows.

Click here to select
the type you want
to view.

Click here to select
the DMI Data format
you need

66

66