Page 1
FortiGate-5020
QuickStart Guide
USB
CONSOLE
PWR ACC
CONSOLE
PWR ACC
© Copyright 2004 Fortinet Incorporated. All rights reserved.
Trademarks
Products mentioned in this document are trademarks or registered trademarks of their
respective holders.
Regulatory Compliance
FCC Class A Part 15 CSA/CUS
19 November 2004
1 2 3 4 5 6 7 8
USB
1 2 3 4 5 6 7 8
PSU A
PSU B
STA IPM
STA IPM
For technical support please visit http://www.fortinet.com.
Checking the package contents
Check that the package contents are complete.
1
FortiGate-5020 Chassis
(Front View)
PSUA
PSU B
Dimensions 5.25 x 17 x 15.5 in. (13.3 x 43.2 x 39.4 cm)
(H x W x D)
Weight 35.5 lb. (16.1 kg)
Operating environment Temperature: -13 to 158 °F (-25 to 70°C)
Relative humidity: 5 to 95% (Non-condensing)
Storage environment Temperature: -20 to 80°C
Relative humidity: 5 to 95% (Non-condensing)
Power dissipation Maximum: 800 watts
Power supplies 2x redundant 100-240 VAC in, 48 VDC out
01-28005-0043-20041119
Blank Faceplates (2)
FortiGate-5000
PSUA
PSU B
USB
1 2 3 4 5 6 7 8
CONSOLE
STAIPM
PWRACC
USB
1 2 3 4 5 6 7 8
CONSOLE
STAIPM
PWRACC
QuickStart Guide
Copyright 2003 Fortinet Incorporated. All rights reserved.
Trademarks
Products mentioned in this document are trademarks.
Documentation
(CD and QuickStart Guide)
LED State Description
PSU A Green Power supply A is on and functioning
correctly.
PSU B Green Power supply B is on and functioning
correctly.
Power
Cables (2)
Page 2
2
Mounting the chassis
Mounting
• Mount the FortiGate-5020 in a standard 19-inch rack. the
FortiGate-5020 requires 4U of vertical space.
• If you install the FortiGate unit in a closed or multi-unit rack
assembly, the operating ambient temperature of the rack
environment may be greater than room ambient. Make sure the
operating ambient temperature does not exceed the
manufacturer's maximum rated ambient temperature.
• The FortiGate chassis should not be operated as a free-standing
appliance.
Air flow
• Air flow is horizontal from right to left.
• For rack installation, make sure that the amount of air flow
required for safe operation of the FortiGate unit is not
compromised.
Mechanical loading
• For rack installations, make sure the mechanical loading of the
FortiGate unit is evenly distributed to avoid a hazardous
condition.
Power Supply
• Two power connections on the back of the FortiGate-5020
chassis supply AC power to the power supplies. Connect both
power connections to a different power source. If one power
source fails, the other source might still be operative.
Technical Support
3
Fortinet Technical Support Web site: http://support.fortinet.com
Fortinet email support:
amer_support@fortinet.com For customers in the United States, Canada, Mexico, Latin America and South America.
apac_support@fortinet.com For customers in Japan, Korea, China, Hong Kong, Singapore, Malaysia, all other Asian countries, and Australia.
eu_support@fortinet.com For customers in the United Kingdom, Scandinavia, Mainland Europe, Africa, and the Middle East.
Loading...