Industry exclusive SmartGATE ice shield
Double door upright
ice storage bins
Features
Designed for safer and more sanitary ice access
- industry exclusive SmartGATE® ice shield controls the flow of ice
to reduce spills and limit contact with ice
- locks in three positions and returns easily to full down
position– even when bin is full
- better access to safely loosen congealed ice
- no bending into bin means more sanitary ice removal with a
scoop or shovel
Fresher ice
- first ice in is first ice out
Ice compatibility
- compatible with cube ice, flake ice and customer preferred
Chewblet® ice
- dual access doors allow for dispensing two dierent ice types
with use of center partition accessory
Durable, user friendly construction
- full stainless bin exterior
- corrosion-resistant poly bin liner
- heavy duty “stay-open” PowerHinge™ door hinge – easy one
hand open and close without door catches
- molded-in gasket never needs to be replaced
Easy installation
- comes assembled, simply screw in legs
- front door assembly may be removed easily for installation
through doorways
Warranty
- 5 years parts and labor on cabinet exterior, includes top and
trim, interior liner, and all other integral components
- visit follettice.com for complete warranty details
Includes:
- custom-cut stainless tops for most popular ice machines
- 82 oz plastic ice scoop
Job
Item
Accessories
SmartCART™ 75 ice cart (item# 00112771)
Center bin partition
Ice paddle and hanging bracket (item# ABICEPADDL46 for
SG1850; item# ABICEPADDL for all others)
Ice rake (item# AB36RAKE for SG1850; item# ABICERAKE for
allothers)
Plastic ice shovel (item# ABICESHOVEL)
Additional carts and accessories (refer to form# 3435)
Follett Europe Polska Sp. z o.o.
Mokry Dwór 26C 83-021 Wiślina, Poland
+48 (58) 785-6140 | Fax: +48 (58) 785-6159
folletteurope.com
801 Church Lane | Easton, PA 18040, USA
1.610.252.7301 | Fax: +1.610.250.0696 | follettice.com
Specification
Maximum bin capacity see model table below
W1 Width see model table below
D1 Depth see model table below
D2 Depth with lower door
assembly (easily removed for
installation access)
D3 Depth with door fully extended add 18.50" (47.0 cm)
H1 Height
,
(adjustable) w/ legs see model table below
H2 Bin sill height 19.00" (48.3 cm)
H3 Height lower section see model table below
Required door access see model table below
L1 Drain 1.00" FPT, center of bin bottom
Ice compatibility cube ice, flake ice and Chewblet ice
Shipping weight see model table below
NOTE: For indoor use only
SHORT FORM SPECIFICATION:
industry-exclusive SmartGATE ice shield. Bin to hold approximately ___________ lb (kg) of
ice. Construction to be welded steel shell and frame. Exterior finish to be stainless steel front,
sides, back and bottom. Bin liner to have non-corroding polyethylene walls and stainless steel
bottom. Bin insulation to be CARB compliant non-HFC foam, bonded to shell and liner for
added structural strength. Bin top to be stainless steel custom-cut for specific ice machine(s) to
be used. Lower door assembly to include non-corroding polyethylene ice door access assembly,
polyethylene lift door with PowerHinge door hinge to eliminate gasket and latches, and inner
SmartGATE ice shield to positively control ice flow into ice door access assembly area and reduce
spillage. Entire lower door assembly to be easily removable for installation through narrow
doors. Where used, upper inspection windows to be of molded double-wall plastic to increase
durability and minimize meltage and condensation. Bin to have 6.00" (15.24cm) legs, adjustable
to 7.25"(18.42 cm). Bin drain to be 1.00" FPT rigid PVC. NSF-listed.
add 8.00" (20.32 cm) to D1
Ice storage bin to be Follett model ___________ with
Dimensional drawing
W1
H1
D1
H2
H1
H3
C
L
SG2100,
SG2250,
SG2650
D3
H2
SG3200,
SG3900,
SG4600
C
L
SMARTCART and POWERHINGE are trademarks of Follett LLC.
CHEWBLET, FOLLETT and SMARTGATE are registered trademarks of Follett LLC, registered in the US.
Follett reserves the right to change specifications at any time without obligation. Certifications may
vary depending on country of origin.
,
Maximum bin
Model
SG1850-96
SG2100-72
SG2250-72
SG2650-72
SG3200-72
SG3900-72
SG4600-72
Notes:
Computed on cubic volume of bin. Does not reflect cart capacity or voids that can occur due to pyramiding.
Add 8.00" (20.32 cm) to depth (D) for door assemblies (easily removed for installation access).
Special top required for ice machines weighing more than 1000 lb (454 kg). Add 2.12" (5.38 cm) to height. Contact factory.
Required clearance for installation access through doors (may require removal of door assembly).
Follett recommends installation of a floor drain with grate with all ice storage bins.
2250 (1021) 71.50 (2.02) 72.00 (182.9) 48.00 (121.9) 50.50 (128.3) N/A N/A 49.00 (124.5) 516 (235)
2650 (1202) 84.00 (2.38) 72.00 (182.9) 40.00 (101.6) 66.50 (168.9) N/A N/A 41.00 (104.1) 571 (259)
3240 (1470) 102.70 (2.90) 72.00 (182.9) 48.00 (121.9) 69.50 (176.5) 31.50 (80.0) 33.00 (83.8) 35.00 (88.9) 762 (346)
3940 (1787) 125.10 (3.54) 72.00 (182.9) 48.00 (121.9) 81.50 (207.0) 43.00 (109.2) 33.00 (83.8) 44.00 (111.8) 835 (379)
4640 (2105) 147.40 (4.17) 72.00 (182.9) 48.00 (121.9) 93.00 (236.2) 43.00 (109.2) 44.50 (113.0) 47.00 (119.4) 901 (409)
1
Cubic volume
cu ft (m)
Width - W1
capacity
lb (kg)
1870 (848) 59.40 (1.68) 96.00 (243.8) 31.00 (78.7) 51.00 (129.5) N/A N/A 32.00 (81.3) 450 (205)
2110 (957) 67.10 (1.90) 72.00 (182.9) 40.00 (101.6) 57.00 (144.8) N/A N/A 41.00 (104.1) 486 (221)
in (cm)
Depth - D1
in (cm)
Height
w/ legs- H1
in (cm)
Height upper
section - H2
in (cm)
L1
Height lower
section - H3
in (cm)
Required door
access
in (cm)
D1
D2
Approximate
ship weight
lb (kg)
Double door uprights
9145-2019121 | © Follett LLC
Follett Europe Polska Sp. z o.o.
Mokry Dwór 26C 83-021 Wiślina, Poland
+48 (58) 785-6140 | Fax: +48 (58) 785-6159
folletteurope.com
801 Church Lane | Easton, PA 18040, USA
1.610.252.7301 | Fax: +1.610.250.0696 | follettice.com