Follett HCF1810RVS, HCD1810NMS, HCF2110RMS, HCD2110NMS, HCF1810RMS Specifications

Features

Horizon Elite

1810 series ‑ up to 1784 lb (810 kg) in 24 hours
2110 series ‑ up to 2039 lb (925 kg) in 24 hours

‑ automatically transport ice through a tube with RIDE

technology from up to 75' (22.9 m) away
‑ chewable, compressed nugget ice is preferred over cubes¹
‑ Chewblet ice dispenses reliably from ice and

beveragedispensers
‑ available with approximately 1.00" (2.54 cm) long standard

Chewblet ice or optional 3/8" (0.95 cm) long Micro

Chewblet

™

ice

‑ quiet production without noisy harvest cycles

Revolutionary, scale inhibiting design

‑ produces ice that has 15% the TDS of the incoming water for

optimum dispensing and long life in drinks
‑ quarantines and regularly expels scale producing dissolved

solids to dramatically reduce scalebuildup
‑ increases time between descaling and reduces or eliminates

the need for expensive scale treatment
‑ saves 35% water compared to comparable cubers

®

‑ three phase models ENERGY STAR

certified

Durable, attractive ice machine

‑ regular bearing inspection or replacement is notrequired
‑ upgraded, easy‑to‑read LED operating status and

diagnosticdisplay

Designed with sanitation in mind

‑ Agion® silver‑based antimicrobial product protection of key

ice and water contact components²
‑ floatless, sealed design inhibits formation of biofilms
‑ semi‑automatic cleaning and sanitizing system

Warranty

‑ 3 years parts and labor, 5 years compressor parts

Certifications

1

Independent third party studies. Contact Follett for details.

2

Disclaimer: Antimicrobial protection is limited to the treated components and does not treat water or ice.

®

™

Horizon Elite

remote 1810, 2110 series Chewblet® ice machine

Short form specification:

Ice machine to be a Follett® Horizon Elite ice machine model
______________ [Insert size/series,condenser type and installation/
mounting, from model number guide] capable of producing compressed
nugget ice using an ecient, sanitary horizontal evaporator/auger system
and delivering ice by a flexible wire reinforced transport tube to

ice storage bin, iceand water dispenser, ice and beverage dispenser,

drop‑in dispenser or Ice Manager™ diverter valve system, slide‑out
evaporator with utility docking station, front‑mounted unit status display,
evaporator water inlet at harvest end with automatic flush while producing
ice, and semi‑automatic cleaning and sanitizing system, plus all the features
listed below and mounting/performance‑enhancing accessories checked.

Model configurations

For use with

1

ice storage bin

Follett Vision

™

undercounter
ice and beverage
dispenser

Cornelius
PR150
undercounter ice
and beverage

Install/
mount Condenser Evaporator

with 115/60/1

top
mount

without 115/60/1 HCD1810NBT HCD2110NBT

with 115/60/1

RIDE

without 115/60/1 HCD1810NBS HCD2110NBS

with 115/60/1

Item number
1810 series

4, 5

HCD1810RBT HCD2110RBT

4, 5

HCD1810RBS HCD2110RBS

4, 5

HCD1810RVS HCD2110RVS

RIDE

without 115/60/1 HCD1810NVS HCD2110NVS

4, 5

with 115/60/1

HCD1810RPS HCD2110RPS

RIDE

without 115/60/1 HCD1810NPS HCD2110NPS

6

Item number
2110 series

dispenser ²

4, 5

HCD1810RHT HCD2110RHT

4, 5

HCD1810RHS HCD2110RHS

countertop ice
and beverage
dispenser
(by others)

with 115/60/1

top

3

mount

without 115/60/1 HCD1810NHT HCD2110NHT

with 115/60/1

RIDE

without 115/60/1 HCD1810NHS HCD2110NHS

drop-in dispenser
(by others)

Ice Manager
diverter
valve system

¹ Ordered separately
² Not compatible with Micro Chewblet ice
³ Requires top kit (see page 5 for part number)
⁴ Condensing unit is 208-230/60/1
⁵ For three phase remote condensing unit, replace third character (D) with an F

e.g. HCF1810RBT

⁶ For Micro Chewblet ice, replace second character (C) with an M

e.g. HMD2110RBT

with 115/60/1

RIDE

without 115/60/1 HCD1810NJS HCD2110NJS

with 115/60/1

RIDE

without 115/60/1 HCD1810NMS HCD2110NMS

4, 5

HCD1810RJS HCD2110RJS

4, 5

HCD1810RMS HCD2110RMS

6

Job
Item

801 Church Lane | Easton, PA 18040, USA

1.800.523.9361 | 1.610.252.7301 | follettice.com

Accessories

L2

L1

G

Dimensional drawing

Top kit for ice and beverage dispensers (page 5)
Water filters (refer to form# 9905)
Wall mount bracket (item# 00997098)

D1

W1

C1

Ice machine stand, height‑adjustable (item# 00997080)
Timer to control one or two ice machines

(item# 00967625)

Longer ice transport tube, specify length: ___ ft/m in

5'/1.5 m increments (10'/3 m provided as standard for
RIDE models) (item#00174896)

Insulated 35' (10.7 m) refrigeration lines

(item#00977785) – (not pre‑charged) for 1810R
and2110R

SafeCLEAN Plus

1 x 8 oz (237 ml) bottle(item#01147826)
6 x 8 oz (237 ml) bottles(item#01149954)
Carton of 24 x 8 oz (237 ml) bottles

™

ice machine cleaner

(item#01149962)

SaniSponge

™

, 24 sanitary sponges (item# 01075431)

H1

19.59"

(49.76 cm)

(40.64 cm)

C1

16.00"

2.28"

(5.79 cm)

2.73"

(6.93 cm)

Back View

22.69"

(57.6 cm)

C2

C3

C5

C4

6.04"

(15.34 cm)

22.00"

(55.9 cm)

Specification, evaporator unit

Horizon Elite 1810 series Horizon Elite 2110 series

W1 Width 22.70" (57.7 cm)

Fits on 22.00" wide dispensers

D1 Depth 23.70" (60.2 cm) 23.70" (60.2 cm)
H1 Height 22.50" (57.2 cm) 22.50" (57.2 cm)

Clearance top, left and right–1.00"(2.54 cm) top, left and right–1.00"(2.54 cm)
C1 Electrical

115 V/60/1

5 amps, requires dedicated
15 amp circuit,
6' (1.8 m) cord, NEMA 5‑15 plug

Operating power 368 W 368 W

C2 Ice transport tube see page 7 for details see page 7 for details
C3 Water inlet 3/8" OD push‑in water inlet –

internalconnection

C4 Drain 3/4" MPT, 1" drain required

see page 7 for details

C5 Ice bin signal cord for Vision applications only for Vision applications only
C6 Liquid line 3/8" 3/8"
C7 Suction line 7/8" 7/8"

Air temperature 50 ‑100 F (10 ‑ 38 C) 50 ‑100 F (10 ‑ 38 C)
Water temperature 45 ‑ 90 F (7 ‑ 32 C) 45 ‑ 90 F (7 ‑ 32 C)
Potable water pressure 10 ‑ 70 psi (69 ‑ 483 kPa) 10 ‑ 70 psi (69 ‑ 483 kPa)
Ice production see ice production chart on page 8 see ice production chart on page 8
Energy consumption

90 F (32 C) air,
70 F (21C) water

single phase – 4.59 kWh
three phase – 3.33 kWh
per 100lb(45.4 kg) ice

Water consumption 12.4 gal (47 L) of potable water per 100lb

(45.4kg) ofice (per AHRI test standards).

13.9gal (53 L) at lowTDS flush setting.
Refrigerant R404a R404a
BTU/hr (Kcal/hr) at 0 F (‑18 C)

15,700 (3,956) 18,200 (4,586)

evaporator, 90 F (32C) ambient air
Rack systems EPR valve set point

0 F (‑18 C) 0 F (‑18 C)

EPR valve to be supplied by installer
Approximate ship weight 170 lb (77 kg) 175 lb (79 kg)
Approximate net weight 160 lb (73 kg) 165 lb (75 kg)
NOTE: For indoor use only. Outdoor installation of evaporator unit is not recommended and will void warranty.

22.70" (57.7 cm)
Fits on 22.00" wide dispensers

5 amps, requires dedicated
15 amp circuit,
6' (1.8 m) cord, NEMA 5‑15 plug

3/8" OD push‑in water inlet –
internalconnection

3/4" MPT, 1" drain required
see page 7 for details

single phase – 4.65 kWh
three phase – 2.93 kWh
per 100lb(45.4 kg) ice

12.4 gal (47 L) of potable water per 100lb
(45.4kg) ofice (per AHRI test standards).

13.9gal (53 L) at lowTDS flush setting.

C7

C6

2

Form# 8180

Remote 1810, 2110 series ice machine

W1

D1

H1

Dimensional drawing

Specification, condenser unit

Horizon Elite 1810 series Horizon Elite 2110 series

W1 Width 30.00" (76.2 cm) – all models 30.00" (76.2 cm) – all models
D1 Depth (hail guard included) 38.50" (97.8 cm) – all models 38.50" (97.8 cm) – all models
H1 Height 25.75" (65.4 cm) – all models 25.75" (65.4 cm) – all models

Electrical single phase – 208‑230/60/1

three phase – 208‑230/60/3

Operating power single phase – 6.0 kW

three phase – 3.6 kW

Minimum circuit ampacity single phase – 26.2 A

three phase – 15.7 A

Maximum circuit HVACR breaker size single phase – 45 A

three phase – 25 A

Outdoor condensing unit operating limits
(air temperature)

Maximum refrigerant line run length 75' (22.9 m) 75' (22.9 m)
Maximum line rise above evaporator 35' (10.7 m) 35' (10.7 m)
Evaporator mounting above condenser 15' (4.6 m) 15' (4.6 m)
Maximum refrigeration line drop without oiltrap 15' (4.6 m) 15' (4.6 m)
Refrigerant charge 14.5 lb required at installation 14.5 lb required at installation
Approximate ship weight 305 lb (138 kg) 305 lb (138 kg)
Approximate net weight 295 lb (134 kg) 295 lb (134 kg)
NOTE:

1. The entire liquid line should be insulated separately from the suction line.

min ‑20 F (‑29 C)
max 120 F (49 C)

single phase – 208‑230/60/1
three phase – 208‑230/60/3

single phase – 6.2 kW
three phase – 4.6 kW

single phase – 27.1 A
three phase – 19.9 A

single phase – 45 A
three phase – 30 A

min ‑20 F (‑29 C)
max 120 F (49 C)

Remote 1810, 2110 series ice machine

Form# 8180

3