Follett HCD700NHS Installation Manual
Horizon™ Ice Machine Models with RIDE® Technology
Installation Instructions for Harmony™ or
HCD/HMD700RHS
HCD/HMD700NHS
(See model number congurator on page 2 for details.)
Order parts online
www.follettice.com
For applications using 110CM Symphony Plus
and most countertop dispensers manufactured by
Cornelius • Lancer • SerVend
110CM Symphony™ Plus Applications
remote condensing
801 Church Lane • Easton, PA 18040, USA
Toll free (877) 612-5086 • +1 (610) 252-7301
www.follettice.com
01012673R03
Chewblet® Ice Machine Model Number Configurations
A V SC 700HC
MC Maestro™
Chewblet
(400 Series)
HC Horizon
Chewblet
(1000, 1400,
1650 Series)
HM Horizon
Micro
Chewblet
C 208-230/60/1 (icemaking head)
Self-contained only.
D 115/60/1 (icemaking head)
Self-contained and remote.
If remote unit, high side is
208-230/60/1.
E 230/50/1 (icemaking head)
Self-contained only.
400 up to
454 lbs
(206kg)
700 up to
750 lbs
(340kg)
1000 up to
1036 lbs
(471kg)
1400 up to
1450 lbs
(658kg)
1650 up to
1580 lbs
(717kg)
CondenserSeriesVoltageMachine
A Air-cooled, self-contained
W Water-cooled,
self-contained
R Air-cooled, remote
condensing unit
N Air-cooled, no condensing
unit for
connection to parallel rack
system
V Vision™
H Harmony™
B Ice storage
bin
J Drop-in
M Ice Manager™
diverter valve
system
ConfigurationApplication
S RIDE
T Top-mount
®
(RIDE remote ice
delivery equipment)
2
remote HARMONY and Symphony Plus • RIDE Technology
Read and complete the following 8 installation steps
Unpack
1
Dispenser preparation
3
Ice transport tube
5
Site preparation
2
Louvered docking assembly
4
External connection
6
Internal connection
7
Front cover
8
HARMONY and Symphony Plus • RIDE Technology remote
3
Carefully unpack and inspect the contents of your Follett ice machine.
Unpack
1
1. 1
Unpack ice machine
➊ ➋
➌ ➍
7/16"
7/16"
➎ ➏
4
remote HARMONY and Symphony Plus • RIDE Technology
Site preparation
Prepare the installation site.
Provide drainage, water supply and electrical power to within 6 feet (2m) of ice
machine in accordance with local and national codes. Outdoor installation of
low side is not recommended and will void warranty.
2
2.1
2.1
Installation site requirements
1/4"
➌
➋
➋
➊
HCD700R/N
NEMA
5-15
3/8" ∅ (9,5mm)
➎
➍
1'
Electrical ➊
• 120/60/1-6 amps
Potable water supply
• 10-70 psi (69-483kpa)
• 45-90 F (7-32 C)
• Water supply must be treated by a scale-inhibiting lter (item# 00130286)
Drain ➌
• The drain line from the ice machine must be vented and have at least 1/4” per foot pitch
(6,4mm/0,3m)
Refrigeration lines
• 5/8" (15,8mm) diameter suction (insulated)
• 3/8" (9,5mm) liquid
➍
➋
➍
➎
HARMONY and Symphony Plus • RIDE Technology remote
5
Dispenser preparation
Prepare the dispenser.
Attention! The location of the hole in the dispenser top is dependent
on the type of dispenser. Be sure to follow Step 3.1 for the
appropriate dispenser.
3
3.1
Lancer Sensation and Touchpoint
Locate hole position 9" (254 mm) from
back and 9" (229 mm) from right of
dispenser top
3.2
Hole location - Harmony (Lancer, Cornelius or Servend), or 110CM Symphony Plus
Back of Top
Front of Top
9.00"
10.00"
3.0" ∅
Top preparation
Standard (Cornelius, Lancer, or Servend)
5"
(127 mm)
3.0" ∅
(77,2 mm)
Locate hole position 5" (127 mm) from back
of dispenser top
3.3
Top preparation
110CM Symphony Plus
Back of Top
Front of Top
Locate hole position 5" (127 mm) from
back and right of dispenser top
5" (127 mm)
3.0" ∅
(77,2 mm)
5"
(127 mm)
• Remove protective tape from gaskets
6
remote HARMONY and Symphony Plus • RIDE Technology
➋
➊
➊
• Apply gaskets
• Install shuttle actuator
dispenser top and secure with locking nut
➊
through
➋
➌
➌
Loading...