Follett HCD1010NHS, HCF1010RHS, HCC1410WHS Installation Manual
Horizon Elite™ Ice Machine with RIDE™ Technology
Installation Instructions for Harmony
HMD/HCD710AHS,
HCC/HCE/HMC/HME: 1010AHS, 1010WHS, 1410AHS, 1410WHS
(See model number congurator on page 2 for details.)
Order parts online
www.follettice.com
Horizon ice machines with RIDE technology
to t most countertop dispensers manufactured by
Cornelius • Lancer • SerVend
™
self-contained
801 Church Lane • Easton, PA 18040, USA
Toll free (877) 612-5086 • +1 (610) 252-7301
www.follettice.com
01113224R02
Chewblet® Ice Machine Model Number Configurations
HC 1810D SVA
ConfigurationApplication
S RIDE™
(RIDE remote
ice delivery
equipment)
T Top-mount
MC Maestro™
Chewblet
(425 Series)
HC Horizon
Chewblet
(710, 1010,
1410, 1810,
2110 Series)
HM Horizon
Micro Chewblet
C 208-230/60/1 (icemaking head)
®
Self-contained only.
D 115/60/1 (icemaking head)
Self-contained and remote. If remote
unit, high side is 208-230/60/1.
E 230/50/1 (icemaking head)
Self-contained only.
F 115/60/1 (icemaking head)
Remote only. High side is
208-230/60/3.
425 up to
425 lbs
(193 kg)
710 up to
675 lbs
(306 kg)
1010 up to
1061 lbs
(482 kg)
1410 up to
1466 lbs
(665 kg)
1810 up to
1790 lbs
(812 kg)
2110 up to
2039 lbs
(925 kg)
CondenserSeriesVoltageIcemaker
A Air-cooled, self-contained
W Water-cooled, self-contained
R Air-cooled, remote condensing unit
N Air-cooled, no condensing unit for
connection to parallel rack system
V Vision™
H Harmony™
B Ice storage bin
J Drop-in
M Ice Manager
diverter valve
system
P Cornelius Profile
PR150
CAUTION!
§ This appliance should be connected by a qualied person in accordance with applicable codes.
§ If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualied
persons in order to avoid a hazard.
§ Connect to potable water supply only.
§ This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory,
or mental capabilities, or lack of experience and knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and understand the hazards involved. Children should be
supervised to ensure that they do not play with the appliance.
§ This appliance is intended to be used for household and similar applications such as staff kitchen areas
in shops, offices and other working environments; farm houses and by clients in hotels, motels and other
residential type environments; bed and breakfast type environments; catering and similar non-retail
applications.
§ WARNING! To avoid a hazard due to instability of the appliance, it must be xed in accordance with the
instructions.
2
Horizon Elite 710/1010/1410 HARMONY • RIDE Technology
Contents
Unpack ............................................................................................................................................................................4
Unpack Ice Machine ..................................................................................................................................................4
Site Preparation .............................................................................................................................................................. 5
Installation site requirements .....................................................................................................................................5
Dispenser Top Preparation ............................................................................................................................................ 6
Top preparation ..........................................................................................................................................................6
Install shuttle actuator ................................................................................................................................................6
Mount Ice Machine .........................................................................................................................................................7
Ice machine in cabinet ...............................................................................................................................................7
External Connections ..................................................................................................................................................10
Transport tube installation ....................................................................................................................................... 10
Air-cooled ice machines only ................................................................................................................................... 12
Water-cooled ice machines only .............................................................................................................................. 12
Internal Connections ...................................................................................................................................................13
Ice transport tube .................................................................................................................................................... 13
Potable water lines ................................................................................................................................................... 13
Power cord ............................................................................................................................................................... 13
Power cord ............................................................................................................................................................... 13
TDS switch ............................................................................................................................................................... 14
Cooling Lines ........................................................................................................................................................... 14
Ice transport tube .................................................................................................................................................... 14
Potable Water Line ................................................................................................................................................... 15
Cooling lines and power ..........................................................................................................................................15
Power cord ............................................................................................................................................................... 15
Plate ......................................................................................................................................................................... 15
TDS switch ............................................................................................................................................................... 16
Front Cover ................................................................................................................................................................... 17
Install cover - undercounter air-cooled application only .......................................................................................... 17
Install front cover .....................................................................................................................................................17
Dispenser Agitation Adjustment .................................................................................................................................18
Agitation adjustments - CORNELIUS ..................................................................................................................18
Agitation adjustments – LANCER 4500 SERIES .................................................................................................... 18
Agitation adjustments – LANCER FS SERIES .......................................................................................................19
Agitation adjustments – SERVEND ......................................................................................................................... 19
Dispenser diverter plate overview – CORNELIUS, ED, DF AND DB SERIES
(installation on next page) ....................................................................................................................................20
Dispenser diverter plate installation – CORNELIUS, ED, DF AND DB SERIES ....................................................21
RIDE model ice machine start up procedure ............................................................................................................22
Before turning on power ..........................................................................................................................................22
After turning on power .............................................................................................................................................22
HARMONY • RIDE Technology Horizon Elite 710/1010/1410
3
1. Unpack
Carefully unpack and inspect the contents of your Follett ice machine.
1.1 Unpack Ice Machine
➊
➍
7/16"
➋
7/16"
DO NOT TILT ICE MACHINE
TO ACCESS BOLTS!
COMPRESSOR DAMAGE
WILL RESULT
➌
➎
➏
4
Horizon Elite 710/1010/1410 HARMONY • RIDE Technology
➐
2. Site Preparation
1" PVC Drain
2 ft. x 1" OD
silicone tubing
3/4" MPT x 1" slip
3/4" barb x 3/4" FPT
➍
1'
➍
1/4" per foot
(6,4 mm per 0,3 m)
Provide drainage, potable water supply and electrical power to within 6 feet (2 m) of ice
machine in accordance with local and national codes. Outdoor installation is not recommended
and will void warranty.
2.1 Installation site requirements
H_C1010
NEMA
➊
6-15
➋
➌
H_D710
NEMA
5-15
H_C1410
NEMA
6-20
➍
115 V ±5%, 208 V –5% to 230 V +5%
Electrical ➊
WARNING!
§ This appliance should be connected by a qualied person in accordance with applicable codes.
§ If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualied
persons in order to avoid a hazard.
H_C1010/1410(A/W)HS 208-230/60 breaker
* Requires a 15A dedicated circuit.
H_E1010/1410(A/W)HS 230/50
(H_E1010A/W requires 15A circuit, 1.50 mm2 wire, H_E1410A/W requires 20A circuit, 4.00 mm2 wire)
‡ Plug must be provided by end user & must conform to standard EN 60 335 -2-24 of the end destination.
‡
H _ D710 AHS 115 / 60
Requires a 15A dedicated circuit.
HARMONY • RIDE Technology Horizon Elite 710/1010/1410
Potable Water Supply ➋ (3/8" push-in internal connection, 3/8" OD tubing required)
10 psi to 70 psi (69 kpa to 483kpa) 45 F to 90 F (7 C to 32 C)
§ This equipment is to be installed with adequate backow protection to comply with applicable federal, state, and
local codes
Condenser water supply for water-cooled systems
10 psi min.; 150 psi max. (69 kpa min.; 1034 kpa max.)
20 F to 90 F (–7 C to 32 C)
1.5 gallons (5.68 liters) per minute
Drain ➍ (3/4" Barb)
Minimum 8” radius on silicone drain line. The drain line from the ice machine must have at least 1/4 in. per foot
(6,4 mm/0,3 m) pitch
➌ (1/4" FPT inlet, 1/4" FPT outlet)
5
3. Dispenser Top Preparation
WARNING!
§ Prior to installing the louvered docking assembly, ensure that the drain tting is oriented (right or left) correctly
for your installation. An optional straight drain tting is also supplied. You may need to remove the back panel
of the docking assembly in order to re-orient or change the drain tting. Replace back panel prior to mounting
the docking assembly.
§ Docking station must be secured in accordance with these instructions to ensure ice machine stability.
§ Ventilation openings in the louvered docking station should be clear of obstruction. Failure to do so could
result in damage to equipment.
§ Plug must be accessible after nal installation.
3.1 Top preparation 3.2 Install shuttle actuator
5"
(12,7 cm)
2.75 to 3" ∅
(7 to 7,6 cm)
➋
➊
§ Locate shuttle actuator hole 5" (127mm) from back
of dispenser top.
§ Cut a 2.75" to 3" (7 to 7,6 cm) diameter hole in
dispenser top for shuttle actuator.
§ Apply gaskets
§ Install shuttle actuator
and secure with locking nut ➌.
➊
.
➋
➌
➊
through dispenser top
6
Horizon Elite 710/1010/1410 HARMONY • RIDE Technology
4. Mount Ice Machine
Mounting options: Cabinet, Wall, Stand
In cabinet Wall bracket Stand
29.50"
(74.9 cm)
25.50"
(64.8 cm)
22.00"
(55.9 cm)
28.70"
(72.9 cm)
(15.24 cm)
21.00"
(53.3 cm)
4.1 Ice machine in cabinet
Ice machines can be installed undercounter/in-cabinet to ll bins or dispensers using RIDE technology. Care
must be taken to ensure proper cabinet venting to avoid recirculation of hot air. Improper venting can cause ice
machine outages.
DOCKING STATION: Horizon
(See detail drawing on page 9)
§ Position and screw louvered docking assembly to the bottom of counter inside of access panel/door 2" (51 mm)
from the front edge of the cross brace
§ The mounting surface for the louvered docking assembly must be solid.
Do not mount directly onto runners or channels.
§ There must be no lip or edge that would hinder the ice machine from sliding in or out of the louvered docking
station
➋
INTAKE AND EXHAUST GRILLE PLACEMENT: Air-cooled models only
(See detail drawing on page 9)
§ Position the intake grille cut out in the access panel/door
Note: Ice machine must be aligned with cut out and inside of access panel to provide a tight seal and prevent
recirculation of hot exhaust air.
§ Left edge of cutout should be 2.25" (57 mm) from the left side of the ice machine
§ Bottom edge of cutout should be 2" (51 mm) from the bottom of the ice machine
§ Position supplied exhaust grille at least 18" (458mm) away from intake grille ➎.
Where possible, install exhaust grille to the rear or side of the base cabinet.
§ If not using supplied grille, air circulation requirements below must be met:
250 sq. in (1613 sq cm) intake air, 250 sq. in (1613 sq. cm) exhaust air
➊
➌
➍
6.00"
HARMONY • RIDE Technology Horizon Elite 710/1010/1410
7
Top View
Front View
Access panel/
door on counter
(51 mm)
➍
2"
➌
2.25"
(57 mm)
24" x 15" cutout (610 mm x 381 mm)
bottom of ice machine
side of ice machine
➊
2" (51 mm)
CAUTION
• Keep ventilation openings in the appliance enclosure clear of obstruction. Failure to do so could result in damage
to equipment.
• To ensure proper ventilation (if not using supplied grille) carefully review air circulation specications on previous
page (4.1)
3D Counter View
31.25" min. (794 mm)
23.5" min.
(597 mm)
24" min.
(610 mm)
31" min.
(787 mm)
➎
18" min.
(458mm)
15"
(381 mm)
No Lip
➋
8
Horizon Elite 710/1010/1410 HARMONY • RIDE Technology
Loading...