Follett EVU155N0LP, EVU155N0RL, EVU155N0RP, EVU155N0LL, EVU155NWLL Specifications

Shown with ice and water tower

EVU155N series

Ice and water

Ice
tower
location Valve type

left

right

Ice-only

left

right

lever
push-button
lever
push-button

lever
push-button
lever
push-button

Item number

EVU155N0LL
EVU155N0LP
EVU155N0RL
EVU155N0RP

EVU155NWLL
EVU155NWLP
EVU155NWRL
EVU155NWRP

™

Vision

EVU155N Series ice and water dispenser

Features

68.0 kg (150 lb) undercounter ice storage
Upscale drink station

- low profile with ice storage under the counter

- auto-fill with an ice machine out of view using RIDE® remote
ice delivery equipment

- ideal for island configurations

- fits into ADA compliant 86.3 cm (34.00") counters

Left or right side icedispense chute
Durable, full stainless exterior
Pre-configured for Follett® RIDE model Chewblet® ice machines

- connect up to two Follett ice machines

- user-preferred, chewable compressed nugget ice

- slow melting, maintains drink temperature

- accepts Chewblet ice or Micro Chewblet™ ice

Faster, safer manual loading of ice at waist height

- safe, easy waist-height loading front or rear

- eliminates overhead lifting of buckets or loading from ladders

- allows quick reloading during serving period with
minimaldisruption

- may be manually loaded with cube ice up to 2.54 cm (1.00")
square or Chewblet ice

Accessories

15.24 cm (6.00") stainless steel leg kit (set of 4) adjustable to

22.86 cm (9.00") (item# AFLEGKT155)

Job
Item

801 Church Lane | Easton, PA 18040, USA

1.800.523.9361 | 1.610.252.7301 | follettice.com

Specification

J2

Ice storage capacity 68.0 kg (150 lb)

W1 Width 79.4 cm (31.25")
W2 Width, tower - with ice

andwater
Width, tower - with ice only

D1 Depth 69.5 cm (27.38")
D2 Depth, drain pan interior 18.74 cm (7.38")
D3 Depth, tower 41.9 cm (16.50")
H1 Height, upper section 55.9 cm (22.00")
H2 Height, lower section 70.8 cm (27.88")
H3 Height, leg adjustable 15.24 cm - 22.86 cm

H4 Ice dispense height clearance 25.4 cm (10.00")
K1 Ice dispense chute utility connections are on opposite

L1 Countertop to lever 20.96 cm (8.25")
L2 Front of dispenser to lever 19.05 cm (7.50")

Installation clearance 129.5 cm (51.00") above counter for

Service clearance
NOTE: For additional information
refer to form# 3105.

C1 Electrical
230V/50Hz/1

C2 Drain - ice storage 3/4" PVC slip joint
C3 Water inlet 3/8" tubing
C4 Drain - drain pan 3/4" PVC hose
C5 Ice machine electrical

connection

C6 Ice machine ice transport tube
connection

C7 Air Break do not connect to drain system
Approximate net weight 91 kg (201 lb)
Approximate shipping weight 105 kg (232 lb)
NOTE: For indoor use only

SHORT FORM SPECIFICATION:

Ice only or ice and water to be Follett model _________. Dispenser to store
up to 68.0 kg (150lb) of ice and allow loading of ice at waist level from front
or rear. Ice and water tower and top to be of stainless steel with plastic trim.
Full-length drain pan to be one-piece molded polyethylene. To include 15.24 cm -

22.86cm (6.00"-9.00") adjustable legs for dispenser support. Storage area to be
polyethylene, insulated with non-CFC foam polyurethane. Dispenser to be
pre-configured to accept up to two RIDE model ice machines, sold separately.

2.4 m(8') cord and plug provided. Dispenser CE listed

29.8 cm (11.75")

17.0 cm (6.69")

(6.00" - 9.00")

side as ice dispense chute

drop-in installation, 3.18 cm (1.25")
maximum counter thickness

30.5 cm (12.00") minimum on side
opposite of ice chute, 91.4cm
(36.00") minimum above counter for
auger removal

2 amps, 2 m cord only
plug provided with each dispenser.
Separate circuits and disconnects
required for each dispenser.

Pre-wired bin signal junction box
with twist lock connector(s).
Standard length is 6.1 m (20').

two ice transport tube entry holes
on each side

Dimensional drawing

W1

D3

K1

H4

L1

15.24 cm
(6.00")

W2

H1

H2

H3

C6

7.32 cm
(2.88")

8.89 cm
(3.50")

47.0 cm
(18.50")

C6

C7

C3

C4

C2

C1

D1

D2

L2

C5

Counter cutout detail

J1

J3

J4

J1 Cutout depth 66.68 cm (26.25") ±

.0317cm(.0125")

J2 Cutout width 77.152 cm (30.375") ±

.0317cm(.0125")

J3 Flat surface

required

J4 Optional – counter front may be removed for slide-in

installation

79.375 cm (31.25") W x

71.12 cm (28.00") D

EVU155N series

6975-201810 | © Follett LLC

Micro Chewblet and Vision are trademarks of Follett Corporation.
Chewblet, Follett and RIDE are registered trademarks of Follett Corporation, registered in the US.
Follett reserves the right to change specifications at any time without obligation. Certifications may vary

801 Church Lane | Easton, PA 18040, USA

1.800.523.9361 | 1.610.252.7301 | follettice.com

depending on country oforigin.