Follett CVU300N0LL, CVU155N0LL Specifications

CVU155NOLP

CVU155N series – 150 lb (68 kg) ice storage

Ice tower
location Valve type Item number

left

right

CVU300N series – 300 lb (136 kg) ice storage

Ice tower
location Valve type Item number

left

right

lever
push-button
lever
push-button

lever
push-button
lever
push-button

CVU155N0LL
CVU155N0LP
CVU155N0RL
CVU155N0RP

CVU300N0LL
CVU300N0LP
CVU300N0RL
CVU300N0RP

™

Vision

CVU155 and 300 Series ice and water dispenser for

marine applications

Features

Up to 150 or 300 lb (68 or 136 kg) undercounter ice storage
Upscale drink station

- designed for marine applications to address United States
Public Health Service (USPHS) principles

- low profile with ice storage under the counter

- autofill with an ice machine out of view using RIDE® remote ice
delivery equipment

- ideal for island configurations

- fits into ADA compliant 34.00" (86.3 cm) counters

Left or right side icedispense chute
Durable, full stainless exterior
Pre-configured for Follett® RIDE model Chewblet® ice machines

- connect up to two Follett ice machines

- user-preferred, chewable compressed nugget ice

- slow melting, maintains drink temperature

- accepts Chewblet ice or Micro Chewblet™ ice

Faster, safer manual loading of ice at waist height

- safe, easy waist-height loading front or rear

- eliminates overhead lifting of buckets or loading from ladders

- allows quick reloading during serving period with
minimaldisruption

- may be manually loaded with cube ice up to 1.00" (2.54 cm)
square or Chewblet ice

Accessories

6.00" (15.24 cm) stainless steel leg kit (set of 4) adjustable to

9.00" (22.86 cm) for VU155 series only (item# AFLEGKT155)

4.00" (10.16 cm) stainless steel leg (individual) adjustable to

6.75" (17.15 cm) for VU300 series only (item# 00137257)

Job
Item

801 Church Lane | Easton, PA 18040, USA

1.800.523.9361 | 1.610.252.7301 | follettice.com

CVU155N Specification

J2

Ice storage capacity 150 lb (68 kg)

W1 Width 31.25" (79.4 cm)
W2 Width, Tower 12.00" (30.5 cm)
D1 Depth 27.38" (69.6 cm)
D2 Depth, Tower 12.00" (30.5 cm)
D3 Depth, drain pan interior 7.25" (18.42 cm)
H1 Height, upper section 22.00" (55.9 cm)
H2 Height, lower section 27.88" (70.8 cm)
H3 Height, leg adjustable 6.00" - 9.00"

(15.24 - 22.86 cm)

H4 Ice dispense height clearance 10.00" (25.4 cm)
K1 Ice dispense chute utility connections are on same

opposite as ice dispense chute

L1 Countertop to lever 7.50" (19.05 cm)
L2 Front of dispenser to lever 8.25" (20.96 cm)

Installation clearance 51.00" (129.5 cm) above counter for

drop-in installation, 1.25" (3.18 cm)
maximum counter thickness

Service clearance 12.00" (30.5 cm) minimum on

ice transport tube entry side for
connections, 36.00" (91.4 cm)
minimum above counter for auger
removal

C1 Electrical

220 V/60/1

C2 Drain - ice storage 3/4" PVC slip joint
C3 Water inlet 3/8" ID hose
C4 Drain - drain pan 3/4" PVC hose
C5 Bin signal switch Pre-wired bin signal junction box

C6 Ice machine ice transport tube

connection (12.00" clearance

on side for ice tube entry)
C7 Air break do not connect to drain system
Approximate net weight 201 lb (91 kg)
Approximate shipping weight 232 lb (105 kg)
NOTE: For indoor use only

2.0 amps. Waterproof junction box.
Separate circuits and disconnects
required for each dispenser.

with twist lock connector(s).
Standard length is 20' (6.1 m).

two ice transport tube entry holes
on each side

CVU155N Dimensional drawing

W1

K1

H4

L1

6.00"

(15.24 cm)

W2

2.75"

(6.99 cm)

3.50"

(8.89 cm)

18.50"

(47.0 cm)

C6

C7

C2

C4

C3

D1

D2

D3

L2

C1
C5

CVU155N Counter cutout detail

J1

H1

H4

H2

H3

J3

SHORT FORM SPECIFICATION:

_________. Dispenser to store up to 150lb (68 kg) of ice and allow loading of ice
at waist level from front or rear. Ice and water tower and top to be of stainless
steel with plastic trim. Full-length drain pan to be one-piece molded polyethylene.
To include 6.00" - 9.00" (15.24-22.86cm) adjustable legs for dispenser support.
Storage area to be insulated with CARB compliant non-HFC foam. Dispenser
to be pre-configured to accept up to two _________ RIDE model ice machines,
soldseparately.

3560-201912 | © Follett LLC

Ice and water dispenser to be Follett model

801 Church Lane | Easton, PA 18040, USA

1.800.523.9361 | 1.610.252.7301 | follettice.com

J4

J1 Cutout depth 26.25" (66.67 cm) ± .0125"

(.0317cm)

J2 Cutout width 30.375" (77.152 cm) ± .0125"

(.0317 cm)

J3 Flat surface

required

31.25" (79.37 cm) W x

28.00" (71.12 cm) D

J4 Optional – counter front may be removed for slide-in

installation