Follett 00986059 Installation Manual

Claris Filter for 7 Series Dispensers

P/N 00986059

Installation Instructions

Materials Supplied

(1) Claris  lter
(1) Head assembly
(1) Bracket
(1) Elbow  tting
(2) Bushings
(6) Screws, M5 x 12
(2) Nuts, M5 x 1mm
(20 ft.) Tubing, 1/4" OD x 0.170" ID

CAUTION!

Only quali ed technicians should
attempt to service or maintain this
equipment.

If you experience any problems during
the installation process, please call Follett
Technical Service toll-free at [phone] or
+1(610)252-7301 for assistance.

Installation

1. Turn off water supply to dispenser.

2. Mount bracket and head assembly
(Fig.1). (Bracket shown mounted within

base, right-hand side, of freestanding
unit.)

Fig. 1

Drain
Val ve

Water

In

Head
Assembly

Water
Out

FRONT VIEW

801 Church Lane • Easton, PA 18040, USA
Toll free [phone] • [phone]
www.follettice.com

Order parts online:

www.follettice.com

00986109R00

3. Press and hold the maintenance/clean switch (Fig. 2.1)

until

4. Remove (unscrew) chrome ice dispenser chute (Fig. 2.3).

5. Remove the drip tray (Fig. 2.4).

6. Remove the two screws (Fig. 2.5) on the front panel

(behind the drip tray).

7. Remove and set aside the front panel (Fig. 2.6) - do not
disengage the plug on the back of the User Interface
or the tubing at the water dispenser chute (if so
equipped).

8. Lift and remove the top panel, set aside (Fig.2.7).

9. Remove two screws (Fig. 2.8) and remove left side panel.

displays in the user interface (Fig. 2.2).

Fig. 2

2

1

1

3

2

4

6

5

2 Claris Filter for 7 Series Dispensers