Focusrite Scarlett 18i6 User Guide
Scarlett 18i6
User Guide
FA0521-01
1
2
Important Safety Instructions
Read these instructions1.
Keep these instructions2.
Heed all warnings3.
Follow all instructions4.
Do not use Scarlett 18i6 near water5.
Clean only Scarlett 18i6 with dry cloth6.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions7.
Do not install Scarlett 18i6 near any heat sources such as radiators, heat registers, stoves, or other apparatus (including 8.
ampliers) that produce heat
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than 9.
the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for
your safety. If the provided plug does not t into your outlet, consult an electrician for replacement of the obsolete outlet
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they 10.
exit from the Scarlett 18i6
Only use attachments/accessories specied by Focusrite11.
Use only with the cart, stand, tripod, bracket, or table specied by Focusrite, or sold with the Scarlett 18i6. When a cart is used, 12.
use caution when moving the cart/Scarlett 18i6 combination to avoid injury from tip-over
Unplug Scarlett 18i6 during lightning storms or when unused for long periods of time13.
Refer all servicing to qualied service personnel. Servicing is required when Scarlett 18i6 has been damaged in any way, such 14.
as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the Scarlett 18i6, the Scarlett 18i6 has
been exposed to rain or moisture, does not operate normally, or has been dropped
WARNING: To reduce the risk of re or electric shock, do not expose the Scarlett 18i6 to rain or moisture
It is important that Scarlett 18i6 shall not be exposed to dripping or splashing and that no objects lled with liquids, such as vases
shall be placed on Scarlett 18i6
Do not expose Scarlett 18i6 to drips or splashes•
Do not place any objects lled with liquids, such as vases, on Scarlett 18i6•
Do not install Scarlett 18i6 in a conned space such as a bookcase or similar unit•
Slots and openings in the casing are provided for ventilation and to ensure reliable operation of Scarlett 18i6 and to protect it from •
overheating. Please ensure adequate space around Scarlett 18i6 for sufcient ventilation. Ventilation should not be impeded by
covering the ventilation openings with items such as newspapers, tablecloths curtains etc.
Scarlett 18i6 should be located close enough to the AC outlet so that you can easily grasp the power cord plug at any time•
An apparatus with Class 1 construction shall be connected to an AC outlet with a protective grounding connection•
The MAINS plug or the appliance coupler is used as the disconnect device. Either device shall remain readily operable when the •
Scarlett 18i6 is installed for use
No naked ames, such as lighted candles, should be placed on the apparatus•
WARNING: excessive sound pressure levels from earphones and headphones can cause hearing loss
GB This equipment must be earthed by the power cord
GB
FIN
FIN Laite on liitettävä suojamaadoituskoskettimilla varustettuun pistorasiaan
NOR
NOR Apparatet må kun tilkoples jordet stikkontakt
3
Important Safety Precautions
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT RE-
MOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning ash with arrowhead symbol, within equilateral triangle,
is intended to alert the user to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that may be of sufcient
magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLICANCE
TO RAIN OR MOISTURE
Environmental Declaration
Compliance Information Statement: Declaration of Compliance procedure
Product Identication: Focusrite Scarlett 18i6
Responsible party: American Music and Sound
Address: 5304 Derry Avenue #C
Agoura Hills,
CA 91301
Telephone: 800-994-4984
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
For USA To the User:
Do not modify this unit! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modi-1.
cations not expressly approved by Focusrite may void your authority, granted by the FCC, to use this product.
Important: This product satises FCC regulations when high quality shielded cables are used to connect with other equipment. Failure to use 2.
high quality shielded cables or to follow the installation instructions within this manual may cause magnetic interference with appliances such as
radios and televisions and void your FCC authorization to use this product in the USA.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. 3.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.•
Increase the separation between the equipment and receiver.•
Connect the equipment into an outlet on a circuit different from that •
to which the receiver is connected.•
Consult the dealer or an experienced radio/TV technician for help.•
For Canada To the User:
This Class B digital apparatus complies with Canadian ICES-003
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
RoHS Notice
Focusrite Audio Engineering Limited has conformed
and this product conforms, where applicable, to the
European Union’s Directive 2002/95/EC on Restric-
tions of Hazardous Substances (RoHS) as well as
the following sections of California law which refer to
RoHS, namely sections 25214.10, 25214.10.2, and
58012, Health and Safety Code; Section 42475.2,
Public Resources Code.
4
Contents
Important Safety Instructions ........................................................................................................2
Introduction ....................................................................................................................................5
Basics .............................................................................................................................................5
Box contents .................................................................................................................................. 5
Getting started ................................................................................................................................6
Note on USB hubs ...........................................................................................................................6
Powering the Scarlett 18i6 .............................................................................................................. 6
Hardware ..........................................................................................................................................7
Back panel .......................................................................................................................................7
Front panel ......................................................................................................................................8
Operating System requirements ....................................................................................................9
Installation (Windows and Mac) .....................................................................................................9
Audio set-up in your DAW ............................................................................................................9
Scarlett 18i6 architecture ............................................................................................................. 10
Firmware Update ............................................................................................................................. 10
Scarlett MixControl ......................................................................................................................11
Pre amp section ............................................................................................................................... 12
Mixer section ...................................................................................................................................12
Mixer tab ........................................................................................................................................... 12
Input channel .................................................................................................................................13
Mix output channel .......................................................................................................................... 15
Routing section ............................................................................................................................. 16
Routing audio to the headphones ................................................................................................. 16
Routing presets ...............................................................................................................................17
Monitor section ................................................................................................................................ 18
Device status section ..................................................................................................................... 20
Sample rate display ....................................................................................................................... 20
Sync source display ..................................................................................................................... 20
Sync status display .......................................................................................................................20
USB driver .....................................................................................................................................20
Settings menu (Windows only) ......................................................................................................21
ASIO buffer size ............................................................................................................................. 21
Streaming buffer size ......................................................................................................................21
File menu .......................................................................................................................................... 21
Technical specications .................................................................................................................22
Troubleshooting ..............................................................................................................................23
Copyright .......................................................................................................................................... 23
5
Introduction
Thank you for purchasing Scarlett 18i6, one in a family of Focusrite professional multi-channel USB 2.0 interfaces featuring high
quality Focusrite pre-amps. You now have a complete solution for routing high quality audio in and out of your computer.
This guide provides a detailed explanation of both the hardware and accompanying control software “Scarlett MixControl” to help you
achieve a thorough understanding of the product’s operational features. We recommend that both users who are new to computer
recording, as well as more experienced users, take the time to read through the user guide so that you are fully aware of all the
possibilities that both Scarlett 18i6 and accompanying software have to offer.
If the main User Guide sections do not provide the information you need, be sure to consult http://www.focusrite.com/answerbase,
where you’ll ne a comprehensive list of common technical support queries regarding the product to date.
Basics
The Scarlett 18i6 hardware interface provides the means for connecting microphones, line-level signals, instrument-level signals,
and digital signals to your computer, which are then routed to your audio recording software / digital audio workstation (referred to
throughout this user guide as “DAW”).
All audio signals connected to the inputs, plus audio output from your computer programs are routed to the physical outputs for you
to connect to an amp and speakers, powered monitors, headphones, analogue/digital mixer, and any other studio equipment that you
wish to use. There are also connectors for sending and receiving MIDI.
The accompanying software application, Scarlett MixControl provides further recording, routing and monitoring options, as well as the
ability to control global hardware settings such as sample rate and synchronisation.
Scarlett MixControl software provides mixing and routing to and from the DAW, allowing control over which signals are sent from
the sequencer to each output. All inputs on the Scarlett 18i6 are routed directly to your DAW software for recording, but Scarlett
MixControl also allows you to route these signals to your monitors so that you can listen to the audio signals with zero latency - before
they arrive at your DAW.
Box contents
In the box there is:
1 x Scarlett 18i6
1 x USB cable
1 x Universal DC power supply unit (PSU).
1 x Installer CD: Contains combined installer for drivers and Scarlett MixControl software for Mac and Windows.
Scarlett VST, AU and RTAS plug-in Suite for Mac and Windows - includes
Compressor plug-in
EQ plug-in
Gate plug-in
Reverb plug-in
4 x Self adhesive rubber feet - to be tted to the base of Scarlett 18i6
1 x Registration card
1 x Xcite+ Bundle - includes:
Ableton Live LE software
Bass Station AU and VST synthesiser plug-in with serial number card
Over a Gigabyte of ‘Loopmasters” and “Mike the Drummer” royalty free samples
1 x Focusrite and Novation product brochure
6
Getting started
Before connecting Scarlett 18 i6 to your computer, the software must be installed. This will ensure that the correct drivers are used,
thus preventing any unexpected behaviour.
Note on USB hubs
Scarlett 18i6 is a USB 2.0 device and must be connected to a compatible USB 2.0 port. If using a USB hub, it is essential that all other
devices connected to the hub are also USB 2.0 compatible. If any USB 1.0 / 1.1 devices are connected, the hub will be forced to run at
the legacy speed which may prevent the Scarlett 18i6 from working.
Scarlett 18i6 will use a signicant amount of USB bandwidth (the amount of data transferred via USB). If connected to a USB hub
other devices connected to the hub may affect the performance of Scarlett 18i6. For example, if using a USB 2.0 hard drive for audio
sample playback (also transferring a large amount of data) this should not be connected to the same USB hub as Scarlett 18i6.
Therefore it is recommended, when possible, to connect Scarlett 18i6 directly to your computer USB port rather than through a USB
hub.
Powering the Scarlett 18i6
You must use the included power supply to use the Scarlett 18i6, it does not power from USB alone. This is because the analogue
and digital circuitry requires more power to run than the USB standard can provide.
7
Hardware
Back panel
The Back Panel provides the majority of input and output connections on Scarlett 18i6
7
[1] 6 x TRS jack sockets line inputs 3 to 8 *
[2] 2 x TRS jack sockets for monitor outputs 1 and 2 *
[3] 1 x Optical input socket for ADAT inputs 1-8
[4] 1 x USB 2.0 socket
[5] 2 x DIN5 MIDI input and output sockets
[6] 1 x 2.0mm DC power inlet socket - use supplied power supply only
[7] 2 x RCA S/PDIF input and output sockets
6
5
4 3
2
1
* Either 1/4 inch TRS (balanced) or TS (unbalanced) jack connectors can be used.
8
Front panel
The Front Panel includes the input connectors for mic, line and instrument signals, as well as the input gain controls and
monitoring controls.
1
[1] Channels 1 and 2 with combo XLR input sockets for mic / line / instrument
[2] Channels 1 and 2 gain controls
[3] Channels 1 and 2 instrument LEDs
[4] Phantom power switch with LED for mic inputs 1-2
[5] Channels 1 to 8 signal and overload LEDs
[6] Power LED - lit when the unit receives power from the external power supply unit
[7] USB (Active) LED - lit when the unit connects to the USB driver
[8] LKD (Locked) LED - lit when the unit locks to its internal clock, or to an external clock source
[9] Monitor level control
[10] Headphone level control and output ¼ ” jack
2
33
4
5
6, 7, 8
109
Loading...