IntelliTone provides robust toning
into active network equipment
while eliminating cable
misidentification due to bleed
Banana jacks allow you to use
only the leads you need and
facilitates easy replacement
One tool supports all VDV
cable types (RJ45, RJ11,
coax, and bare wire)
Precisely isolate wire pairs with
built-in SmartTone analog toning
Identify and diagnose POTS
with multi-line Telco detect,
polarity and ring indication
(Line 1 and Line 2)
Identify and diagnose Ethernet
link connectivity with NIC/hub
indication
Cable termination
indicator identifies
if cable is connected
or not
Multiple-level LEDs
simplify signal interpretation in noisy environments.
Visually steps through wiremap tests (200 only)
Tone active networks safely and
effectively with IntelliTone
digital mode
Time-saving thumbwheel
lets you select desired toning
mode on the probe rather than
toner
Test cable continuity, eliminating
need for separate diagnostic tool
Knob provides simple,
task oriented operation
Test cable continuity – eliminat-
ing need for separate diagnostic
tool
Plug (200 only) works
with CableMap function
– eliminating the need for
a separate wiremap tool
SYNC indicates detection
of IntellTone signal and
shows battery status at
power-up
Choose between two digital detection modes:
– lets you locate cables at a distance
– lets you isolate cables in bundles or
Toner and Probe shared features:
IntelliTone digital technology with
advanced signal processing provides
high-resolution measurement
Auto-Off feature: The toner turns off
automatically after 2.5 hours of inactivity.
Probe turns off after 1 hour of inactivity
at patch panels
SmartTone™ analog technology -
IntelliTone Pro Toners generate four
different analog songs which alternate
every time the pair under test is shorted;
IntelliTone Pro Probes detect this tone or
any other analog signal from other testers
Analog mode used to isolate individual wire pairs with
SmartTone
Battery status: 3-level battery status
indicator LEDs on the toner and probe
light for one second at power on
Specifications
General
Toner
Probe
Operating temperature 32 °F to 104 °F (0 °C to 40 °C)
Storage temperature -4 °F to +140 °F (-20 °C to +60 °C)
Operating relative humidity
(% RH without condensation)
95% (50 °F to 95 °F; 10 °C to 35 °C)
75% (95 °F to 104 °F; 35 °C to 40 °C)
Uncontrolled < 50 °F (< 10 °C)
Vibration Random, 2 g, 5 Hz – 500 Hz
Shock 1 m drop test with and without module
Safety EN 61010-1 1st Edition + Amendments 1, 2
Altitude 3000 m
EMC EN 61326-1
Battery type and life 9 V alkaline (NEDA 1604A or IEC 6LR61); 20 hours typical
Applications Copper cabling media, including shielded (STP) and UTP cable; 75 or 50 Ohm coaxial cable; two conductor
Dimensions 5.54 in x 2.94 in x 1.25 in (14.1 cm x 7.5 cm x 3.2 cm)
Display LED
Control Thumbwheel switch
Toner interface Main Mod8 port for tone generation on all 4 pairs of UTP / STP cabling, F connector for coaxial cabling,
Banana jack plugs (2) - two conductor wiring
Toner frequency IntelliTone™ signal: encoded digital signal Analog SmartTone signal: 500-1200Hz, 4 Songs
Talk battery voltage 6 V into 600 W
Output power 5 V p-p
Voltage protection 100 V
Auto power down Turns off automatically after 2.5 hours of inactivity
Dimensions 8.73 in x 1.88 in x 1.26 in (22.2 cm x 4.8 cm x 3.2 cm)
Display (8) LED indicators, Synch LED indicator
Audio IntelliTone: Microprocessor controlled audio files, Analog: Detected toner signal
Control Thumbwheel switch, volume control wheel
Tone detection Detects IntelliTone™ digital signal for Locate, Isolate and CableMap
Detects Analog SmartTone Signal (500-1200Hz) and other analog toners.
Toner interface Main Mod8 port for cablemap on all four pairs of UTP / STP cabling
Auto power down Turns off automatically after one hour of inactivity
Ordering Information
Model NumberItems Included
MT-8200-60AIntelliTone Pro 200 Kit
Includes IntelliTone Pro 200 Toner and 200 Probe, coax F connector adapter, two RJ11 and two RJ45 patch cables,test leads
with alligator clips, lanyards, owners CD and quick start guide,
two 9 volt batteries
MT-8200-50AIntelliTone Pro 100 Kit
Includes IntelliTone Pro 100 Toner and 100 Probe, coax F connector adapter, RJ11 and RJ45 patch cables, test leads with
alligator clips, lanyards, owners CD and quick start guide, two
9 volt batteries
MT-8200-61AIntelliTone Pro 200 Toner
MT-8200-51AIntelliTone Pro 100 Toner
MT-8200-63AIntelliTone Pro 200 Probe
MT-8200-53AIntelliTone Pro 100 Probe
IntelliTone Pro Toner and Probe Accessories
MT-8202-05IntelliTone Pro Case
MT-8203-20Test Leads with Bed of Nails
MT-8203-22Test Leads with Alligator Clips
IntelliTone Pro 100 Kit
• Finds the cables the others can’t
• IntelliTone digital signal processing rejects noise and false signals
• SmartTone analog signal precisely isolates individual wire pairs
• Tones safely and clearly on active networks
• Diagnoses essential cable information with polarity, continuity, and
talk battery
• Identifies and diagnoses POTS with Line 1 service and polarity
IntelliTone Pro 200 Kit (adds the following functionality)
• Identifies and diagnoses 10/100/1 Gb Ethernet link connectivity with NIC/
hub indication
• Identifies and diagnoses POTS with Line 2 POTS service and polarity
• Verifies twisted-pair installation with CableMap capability which
identifies common cable miswire
N E T W O R K S U P E R V I S I O N
Fluke Networks
P.O. Box 777, Everett, WA USA 98206-0777
Fluke Networks operates in more than 50 countries
worldwide. To find your local office contact details,
go to www.flukenetworks.com/contact.