Fluke VT04 Quick Start Guide

Quick Reference Guide

Power On and Off

Menu Functions and Basic Navigation

Visual Image Alignment Control

Color Palette

Visual IR Thermometer

VT02, VT04A, VT04

VT04A/VT04



LCD Display



Power On/Off and Menu



Micro SD Memory card slot



Tripod Mount



Select/Enter



Infrared Lens

To view, print, or download the latest VT-series documents and software, visit:

www.uke.com/vtsmartview

www.uke.com/vtquickstart www.uke.com/vtmanual



Rotating Lens Cover



Visual Camera



Trigger for Image Capture



Battery Cover



Micro USB Connector



Battery Charge Status LED

VT02

VT04

only

First time use:

2 sec.

enter date and time

VT02 VT04A, VT04

Image Blending

0 % 25 % 50 % 100 %75 %

Capture and Save

Use the micro SD memory card to download images from the Product to a PC. The microUSB cable is for battery charging only.

Note

Battery Charge Level

Yellow Highlight

5:12

Open Display

Icon Description VT02

View Stored images

Emissivity

Color Palette

Background Temperature

Hot and Cold Markers

Temperature Units

Clock (Time and Date)

High/Low Temperature Alarm

Auto-Monitor Alarm

Time-Lapse Image Capture

Auto Off

LCD Brightness (low, medium, high)

Save in BMP Format

Factory Reset

Select/Enter

Up/Down to Change Values

VT04A

VT04

• •

Near Mode

Far Mode

Grayscale (Black hot)

Grayscale (White hot)

High Contrast

Rainbow

Ironbow

Hot Metal (VT04A, VT04 only)

Measurement Display

Center-point

Measurement

Center-point Cursor

Center-point

> 9 in / 23 cm≤ 9 in / 23 cm

VT02

IMAGING IR THERMOMETER

US PAT:

www.patentlabel.com/fluke

FLUKE CORPORATION

EVERETT, WA USA

VT02

IMAGING IR THERMOMETER

US PAT:

www.patentlabel.com/fluke

FLUKE CORPORATION

EVERETT, WA USA

•

Measurement Area

Blend Icon

SD Card

No SD card in slot

SD card error

Battery Status

Emissivity

Color Palette

•

SD card empty

•

SD card full

•

1 hr, 2 hr, 4 hr, 8 hr)

15 min, 30 min, 1 hr)

2 hr, 4 hr, 8 hr)

VT04A, VT04 Features

Battery Care (VT02, VT04A)

Safety Information

Turn On a Feature

Turn Off a Feature

High/Low Temperature Alarm

Auto Monitor Alarm

Time-Lapse Image Capture

(15 min, 30 min,

(30 sec, 1 min, 2 min, 5 min,

(-10 °C to +250 °C)

(15 min, 30 min,1 hr,

(-10 °C to +250 °C)

Rechargeable Battery (VT04)

A Warning identies hazardous conditions and procedures that are dangerous to the user. A Caution identies conditions and procedures that can cause damage to the

Product or the equipment under test.

To prevent possible electrical shock, re, or personal injury:

● Read all safety information before you use the Product.

● Carefully read all instructions.

● Use the Product only as specied, or the protection supplied by the Product can be compromised.

● Replace or recharge the batteries when the low battery indicator shows to prevent incorrect measurements.

● Do not use the Product around explosive gas, vapor, or in damp or wet environments.

● Do not use the Product if it operates incorrectly.

● Do not use the Product if it is damaged.

● See emissivity information for actual temperatures. Reective objects result in lower

than actual temperature measurements. These objects pose a burn hazard.

● Remove the batteries if the Product is not used for an extended period of time, or if stored in temperatures above 50 °C. If the batteries are not removed, battery leakage can damage the Product.

● Use only specied replacement parts.

● Use only Fluke approved power adapters to charge the VT04 battery.

XW Warning

W Warning

To prevent personal injury and for safe operation and maintenance of the Product:

● Batteries contain hazardous chemicals that can cause burns or explode. If exposure to chemicals occurs, clean with water and get medical aid.

● Be sure that the battery polarity is correct to prevent battery leakage.

● Do not short the battery terminals together.

● Keep cells and battery packs clean and dry. Clean dirty connectors with a dry, clean cloth.

● Do not disassemble or crush battery cells and battery packs.

● Do not put battery cells and battery packs near heat or re. Do not put in sunlight.

● Use only the Fluke supplied power adapter to charge the VT04 battery.

Specications

Battery Type

VT04: Li-Ion Rechargeable 3.6 V, 2250 mAh, 8.1 Wh

VT02, VT04A: 4 AA, LR6 1.5 V

Battery Life: 8 hrs

Operating Temperature: -5 °C to +45 °C

Storage Temperature: -20 °C to +60 °C

Operating Altitude: 2,000 meters

The table below is a list of symbols used on the Product or in this guide.

Symbol Description

;



Important information. See manual.

Hazardous voltage. Risk of electrical shock.

Conforms to relevant Australian standards.

Conforms to requirements of European Union and European Free Trade

Association.

Conforms to relevant South Korean EMC standards.

This camera contains a Lithium-ion battery. Do not mix with the solid waste

stream. Spent batteries should be disposed of by a qualied recycler or hazardous materials handler per local regulations. Go to Fluke’s website for

recycling information.

This product complies with the WEEE Directive (2002/96/EC) marking

requirements. The afxed label indicates that you must not discard this

electrical/electronic product in domestic household waste. Product Category:

With reference to the equipment types in the WEEE Directive Annex I, this

product is classed as category 9 “Monitoring and Control Instrumentation” product. Do not dispose of this product as unsorted municipal waste. Go to

Fluke’s website for recycling information.

LIMITED WARRANTY AND LIMITATION OF LIABILITY

This Fluke product will be free from defects in material and workmanship for two years from the date of purchase. This warranty does not cover fuses, disposable batteries, or damage from accident, neglect, misuse, alteration, contamination, or abnormal conditions of operation or

handling. Resellers are not authorized to extend any other warranty on Fluke’s behalf. To obtain service during the warranty period, contact your nearest Fluke authorized service center to obtain return authorization information, then send the product to that Service Center with a description of

the problem.

THIS WARRANTY IS YOUR ONLY REMEDY. NO OTHER WARRANTIES, SUCH AS FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSED OR IMPLIED. FLUKE IS NOT LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSSES, ARISING FROM ANY CAUSE OR THEORY. Since some states or countries do not allow the

exclusion or limitation of an implied warranty or of incidental or consequential damages, this

limitation of liability may not apply to you.

Fluke Corporation Fluke Europe B.V. P.O. Box 9090 P.O. Box 1186 Everett, WA 98206-9090 5602 BD Eindhoven U.S.A. The Netherlands

11/99