Fluke Ti300+ Specifications

Page 1
TECHNICAL DATA
Fluke Ti300+ Thermal Imager
Accurate, reliable results
Find issues before they are fully formed. The resolution and accuracy needed to clearly reveal temperature differentials or demonstrate progressive heat changes over time. With LaserSharp™ AutoFocus the Ti300+ ensures focused images—every single time. Enable your team to get clear images while maintaining a safe distance from operating equipment.
• 320 x 240 resolution
• Measure up to 650 °C
• Engineered and tested to withstand a 2-meter drop
• Manual or automatic focus
Focus matters—intelligent focus system
Patented Fluke LaserSharp Auto Focus uses a built-in laser distance meter that provides both speed and precision. The laser-driven target detection pinpoints the target while the camera focuses to capture a precise, high-quality image.
• Easily capture high-quality, focused images of your desired target with the push of a button
• Take infrared images through common obstacles like chain link fences
• Avoid skewed temperature measurements by precisely choosing your target
• Perform the same inspections multiple times as a part of your preventive maintenance program—the built-in laser distance meter calculates and dis­plays how far you are from your target, making repeatability much easier.
POWERFUL, EASY-TO-USE FLUKE CONNECT™ SOFTWARE
The Ti300+ thermal camera is compatible with Fluke Connect—the largest integrated system of maintenance software and tools in the world.
Modern visual design
Intuitive navigation—easier to learn, easier
and faster to work in
Simplified work flows
Simplified reporting work flow and better
report templates
Difficult inspection sites Passive auto focus systems may only
capture near-field subject, meaning that you may be capturing measurements of the wrong target.
Fluke LaserShar p Auto Foc us allows you to select and focus on a specific target.
Page 2
Detailed specifications
Ti300+
Key Features
Infrared resolution 320 x 240 (76,800 pixels)
SuperResolution™ No
IFOV with standard lens (spatial resolution) 1.85 mRad, D:S 532:1
Field of view 34° H x 24° V
Minimum focus distance 15 cm (approx. 6 in)
MultiSharp™ Focus No
LaserSharp™ Auto Focus Yes, for consistently in-focus images. Every. Single. Time.
Laser distance meter
Advanced manual focus Yes
Wireless connectivity Yes, to PC, iPhone® and iPad® (iOS 4s and later), Android™ 4.3 and up, and WiFi to LA N (where available)
Fluke Connect™ app compatible
Fluke Connect Assets
Fluke Connect instant cloud upload
Fluke Connect instant server upload No
IR-Fusion™ technology Yes, adds the context of the visible details to your infrared image
Rugged ized touchscreen display 3.5 inch (landscape), 640 x 480 LCD
Ergonomic design Pistol-grip design for one-handed use
Thermal sensitiv ity (NETD)** ≤ 0.075 °C at 30 °C target temp (75 mK)
Level and span Smooth auto and manual scaling
Touchscreen adjustable level/span Yes
Fast auto toggle bet ween manual and auto modes
Fast auto -rescale in manual mode Yes
Minimum span (in manual mode) 2.0 °C (3.6 °F)
Minimum span (in auto mode) 3.0 °C (5.4 °F)
Built-in dig ital camera (visible light) 5MP
Frame rate 60 Hz or 9 Hz versions
Laser pointer Yes
LED light (torch) Yes
Digital zoom No
Data storage and image capture
Extensive memory options
Image capture, review, save mechanism One-handed image capture, review, and save capability
Image fi le formats bmp, jpeg, is2
Memory review Thumbnail and full screen review
Software Full analysis and repor ting software with access to the Fluke Connect system
Analyze and store radiometric data on a PC Yes
Export file formats with Fluke Connect software
Voice annotation
IR-PhotoNotes™ Yes - 2 images
Text annotations Yes. Including standard shor tcuts as well as user programmable options
Video recording and for mats No
Remote control operations No
Auto capture (temperatu re and interval) No
MATL AB® and LabVIEW® tool boxes No
* Fluke Connect analysis and reporting software is available in all countries but Fluke Connect is not. Please check availability with your authorized Fluke distributor. ** Best possible
Yes*, connect your camera to your buildi ng’s WiFi network, and images taken automatically upload to the Fluke
Yes, calculates dis tance to the ta rget for precisely foc used images a nd displays distance on screen
Yes*, connect your camera to your smartphone, and images taken automatically upload to
the Fluke Connect app for saving and sharing
Through the desktop, assign images to assets, easily compare measurement types in one location
and create reports.
Connect system for viewing on your smart phone or PC
Yes
Removable 4 GB micro SD memory card, 4 GB internal flash memory, save to USB flash drive capability,
upload for permanent storage
Bitmap (.bmp), GIF, JPEG, PNG, TIFF
60 seconds maximum recording time per image; reviewable playback on camera,
optional Bluetooth headset available but not required
2 Fluke Corporation Fluke Ti300+ Thermal Imager
Page 3
Detailed specifications
Ti300+
Battery
Batteries (field-replaceable, rechargeable) Two lithium ion smart battery packs with five-segment LED display to show charge level
Battery life 2-3 hours per battery (actual life varies depending on settings and usage)
Batter y charging time 2.5 hours to full charge
Batter y charging system Two-bay battery charger or in-imager charging. Optional 12 V automot ive charging adapter
AC operation AC operation with included power supply (100 V ac to 240 V ac, 50/60 Hz)
Power saving User selectable sleep and power off modes
Temperature measurement
Temperature measurement range (not calibrated below -10 °C)
Accuracy ± 2 °C or 2 % (at 25 °C nominal, whichever is greater)
On-screen emissivity correction Yes (both value and table)
On-screen reflected background temperature compensation
On-screen transmission correction Yes
Line temperature graph No
Color palettes
Standard palettes
Ultra contrast palettes
Smart lenses
Macro –25 micron lens: 25 MAC2 Yes
2 x telephoto lens: TEL E 2 Yes
4 x telephoto lens: TEL E4 Yes
Wide angle lens: WIDE 2 Yes
General specifications
Color alarms (temperature alarms) High temperature, low temperature, and isotherms (within range)
Infrared spectral band 7.5 μm to 14 μm (long wave)
Operating temperature -10 °C to 50 °C (14 °F to 122 °F)
Storage temperature -20 °C to 50 °C (-4 °F to 122 °F) without batteries
Relative humidity 10 % to 95 % non-condensing
Center-point temperature measurement Yes
Spot temperature Hot and cold spot markers
User-definable spot markers No
User defined measurement boxes 1 expandable-contractible measurement box with MIN-M AX-AVG temp display
Hard case Rugged, hard carr ying case; sof t transpor t bag
Safety IEC 61010 -1: Overvoltage categor y II, Pollution Degree 2
Electromagnetic compatibility IEC 61326-1: Basic EM environment. CISPR 11: Group 1, Class A
Australian RCM I E C 613 26 -1
US FCC CFR 47, Part 15 Subpart B
Vibration 0.03 g2/Hz (3.8 g), 2.5 g IEC 60068-2-6
Shock 25 g, IEC 68-2-29
Drop Eng ineered to withstand 2 meter (6.5 feet) drop with standard lens
Size (H x W x L) 27.7 cm x 12.2 cm x 16.7 cm (10.9 in x 4.8 in x 6.5 in)
Weight (battery included) 1.04 kg (2.3 lb)
Enclosure rating IEC 60529: IP54 (protected against dust, limited ingress; protection against water spray from al l directions)
Warranty Two-years (standard), extended warranties are available
Recommended calibration cycle Two-years (assumes normal operation and normal aging)
Supported languages Czech, Dutch, English, Finnish, French, German, Hungarian, Italian, Japanese, Korean, Polish, Portug uese,
RoHS compliant Yes
9: Rain bow, Ironbow, Blue-Red, High Contrast, Amber, Amber Inverted, Hot Metal, Grayscale, Grayscale
9: Rain bow, Ironbow, Blue-Red, High Contrast, Amber, Amber Inverted, Hot Metal, Grayscale, Grayscale
Russian, Simplified Chinese, Spanish, Swedish, Traditional Chinese, and Turkish
-20 °C to 650 °C (-4 °F to 1,202 °F)
Yes
Inverted
Inverted
3 Fluke Corporation Fluke Ti300+ Thermal Imager
Page 4
Ordering information
FLK-Ti300+ 60 Hz Infrared Camera FLK-Ti300+ 9 Hz Infrared Camera
Included
Infrared camera with standard infrared lens; ac power supply and battery pack charger (including universal ac adapters); two rugged lithium ion smart battery packs; USB cable; HDMI video cable; 4GB micro SD card; rugged, hard carrying case, soft transport bag and adjustable hand strap. Available by free download: Fluke Connect desktop software and user manual
Optional accessories
FLK-LENS/TELE2 Infrared Telephoto Lens (2X magnification) FLK-LENS/4XTELE2 Infrared Telephoto Lens (4X magnification)
FLK-LENS/WIDE2 Infrared Wide Angle Lens FLK-LENS/25MAC2 25 Micron Macro Infrared Lens TI-CAR-CHARGER Car Charger FLK-TI-VIS OR3 Sun Visor BOOK-ITP Introduction to Thermography Principles Book TI-TRIPOD3 Tripod Mounting Accessory FLK-TI-BLUETOOTH Bluetooth headset FLK-TI- SBP 3 Additional Smart Battery FLK-TI-SBC3B Additional Smart Battery Charger
Visit www.fluke.com to get complete details on these products or ask your local Fluke sales representative.
Preventive maintenance simplified. Rework eliminated.
Save time and improve the reliability of your maintenance data by wirelessly syncing measurements using the Fluke Connect system.
• Eliminate data-entry errors by saving measurements directly from the tool and associating them with the work order, report or asset record.
• Maximize uptime and make confident maintenance decisions with data you can trust and trace.
• Move away from clipboards, notebooks and multiple spreadsheets with a wireless one-step measurement transfer.
• Access baseline, historical and current measurements by asset.
• Share your measurement data using ShareLiveTM video calls and emails.
• The Ti300+ infrared camera is part of a growing system of connected test tools and equipment maintenance software. Visit the website to learn more about the Fluke Connect system.
Find out more at flukeconnect.com
All t radema rks are the property of their respective owner s. WiF i or cellular serv ice req uir ed to sha re data. Smartphone, w ireless ser vice and data plan not i nclude d with purchase. Fi rst 5GB of storag e is free. P hone support det ails can be v iewed at f luke.com/phones.
Smart phone wireless service and data plan not included w ith purchase. Fluke Connect is not available in all countries.
Fluke. Keeping your world up and running.
Fluke Corporation PO Box 9090, Everett, WA 98206 U.S.A.
Fluke Europe B.V. PO Box 1186, 5602 BD Eindhoven, The Netherlands
Modification of this document is not permitted without written permission from Fluke Corporation.
For more information call:
In the U.S.A. (800) 443-5853 or
®
Fax (425) 446-5116 In Europe/M-East/Africa +31 (0)40 267 5100 or Fax +31 (0)40 267 5222 In Canada (800)-36-FLUKE or Fax (905) 890-6866 From other countries +1 (425) 446-5500 or Fax +1 (425) 446-5116 Web access: http://www.fluke.com
©2019 Fluke Corporation. Specifications subject to change without notice. 8/2019 6012670a-en
4 Fluke Corporation Fluke Ti300+ Thermal Imager
Loading...