Fluke Ti29 Catalog Page

Fluke Industrial

Thermal Imagers

Models: Ti32, Ti29 and Ti27. Three models specifically

for industrial and electrical applications.

The P3 Series: Superior, not
Superfluous. Fluke is how
other tools are measured.

The greatest technological advancement in thermography
may be how Fluke has made it so simple to capture images
and analyze data right out of the box.

Superior image quality

Industry-leading thermal sensitivity and spatial resolution
combined with a high definition display, creates the sharp­est images in the industry.

One-handed, easy-to-use interface

With just a push of your thumb, go from one-handed
manual smart focus to adding picture-in-picture and even
add voice comments.

Torture tested

Before a Fluke goes into your hands, we drop it from ours.

Ti27

•240x180IR

resolution

•43,200total
IRpixels

Ti29

•280x210IR

resolution

•58,800total
IRpixels

Ti32

•320x240IR

resolution

•76,800total
IRpixels

Made in

the U.S.A.

of U.S. and

non U.S.

parts

Only Fluke thermal imagers are designed from the inside
out to withstand a 6.5 ft drop.

Patented Fluke IR-Fusion

(Picture-in-picture and auto blending)
Precision visible and IR image alignment allows Fluke
to offer the only on-camera blended infrared and visible
image to better diagnose issues.

Interchangeable lenses

Interchangeable wide-angle and IR-Fusion compatible
telephoto lenses to cover any application.

Technical Data

™

®

Industrial

Mechanical,
electromechanical
and general building
maintenance.

Process

Refractory insulation,
tank and vessel levels,
steam systems and traps,
pipes and valves, etc.

Electrical

Unbalanced loads,
overloaded systems,
wiring mistakes or
component failure, etc.

Fluke. Not just infrared, infrared you can use.

Patented Fluke IR-Fusion® Technology

More than picture in picture

Infrared images alone can be difficult to under­stand, which is why Fluke pioneered IR-Fusion,
a revolutionary marriage of visible and infrared
images never before seen in commercial or
industrial thermal imagers. Automatically
capturing a visible image with every infrared
image allows to you always know exactly what
you’re looking at.

®

Not all fusion is created equal

Don’t be fooled by imitators. No other manufacturer
can boast on-camera blending. Compare the images.
Only Fluke has mastered the ability to create the
industry’s only transparent, perfectly blended and
aligned visible and infrared images.

Fluke Competitor

Detailed specifications

Temperature

Ti32 Ti29 Ti27

Temperature measurement range
(not calibrated below -10 °C)

Temperature measurement
accuracy

-20 °C to +600 °C (-4 °F to +1112 °F)

± 2 °C or 2 % (at 25 °C nominal, whichever is greater)

On-screen emissivity correction Yes
On-screen reflected background

temperature compensation

Yes

On-screen transmission correction Yes

Imaging performance

Image capture frequency 9 Hz refresh rate or 60 Hz refresh rate depending upon model variation
Detector type Focal Plane Array, uncooled

microbolometer, 320 x 240 pixels

Focal Plane Array, uncooled

microbolometer, 280 x 210 pixels

Focal Plane Array, uncooled

microbolometer, 240 x 180 pixels
Thermal sensitivity (NETD) ≤ 0.045 °C at 30 °C target temp. (45 mK) ≤ 0.05 °C at 30 °C target temp (50 mK)
Total pixels 76,800 58,800 43,200
Infrared spectral band 7.5 µm to 14 µm (long wave)
Visual (visible light) camera Industrial performance 2.0 megapixel
Minimum focus distance 45 cm (approx. 18 in)
Standard infrared lens type
Field of view 23 ° x 17 °
Spatial resolution (IFOV) 1.25 mRad 1.43 mRad 1.67 mRad
Minimum focus distance 15 cm (approx. 6 in)
Optional telephoto infrared lens type
Field of view 11.5 ° x 8.7 °
Spatial resolution (IFOV) 0.63 mRad 0.72 mRad 0.84 mRad
Minimum focus distance 45 cm (approx. 18 in)
Optional wide-angle infrared lens type
Field of view 46 ° x 34 °
Spatial resolution (IFOV) 2.50 mRad 2.86 mRad 3.34 mRad
Minimum focus distance 7.5 cm (approx. 3 in)
Focus mechanism Manual, one-handed Smart Focus capability

Image presentation

Palettes
Standard Ironbow, Blue-Red, High Contrast, Amber, Amber Inverted, Hot Metal, Grayscale, Grayscale Inverted
Ultra Contrast

™ Ironbow Ultra, Blue-Red Ultra, High Contrast Ultra, Amber Ultra, Amber Inverted Ultra, Hot Metal Ultra,

Grayscale Ultra, Grayscale Inverted Ultra
Level and span Smooth auto-scaling and manual scaling of level and span
Fast auto toggle between manual

and auto modes

Yes

Fast auto-rescale in manual mode Yes
Minimum span (in manual mode) 2.5 °C (4.5 °F)
Minimum span (in auto mode) 5 °C (9 °F)

IR-Fusion

Automatically aligned (parallax
corrected) visual and IR blending

® information

Yes

Picture-In-Picture (PIP) Three levels of on-screen IR blending displayed in center of LCD
Full screen infrared Three levels of on-screen IR blending displayed on LCD
Color alarms (temperature alarms) High-temperature alarm (user-selectable)
Voice annotation 60 seconds maximum recording time per image; reviewable playback on imager

Image capture and data storage

® mode, emissivity, and reflected

Image capture, review, save
mechanism

The Ti32, Ti29 and Ti27 allow users to adjust palette, blending, level, span, IR-Fusion

background temperature compensation, and transmission correction on a captured image before it is stored

One-handed image capture, review, and save capability

Storage medium SD Memory Card (2 GB memory card will store at least 1200 fully radiometric (.is2) IR and linked visual images each with

60 seconds voice annotations, or 3000 basic bitmap (.bmp) images, or 3000 jpeg (.jpeg) images; transferrable to PC via

included multi-format USB card reader

File formats Non-radiometric (.bmp) or (.jpeg) or fully-radiometric (.is2)

No analysis software required for non-radiometric (.bmp and .jpeg) files

Export file formats w/SmartView
software

®

BMP, DIB, GIF, JPE, JFIF, JPEG, JPG, PNG, TIF, and TIFF

Memory review Thumbnail view navigation and review selection

2 Fluke Corporation Ti32, Ti29 and Ti27 Industrial Thermal Imagers