Fluke Ti25, Ti10, Ti9 Catalog Page

Fluke Ti25, Ti10 and

Ti9 Thermal Imagers

The ultimate tools for troubleshooting and maintenance

The perfect tools to add to your problem solving arsenal. Built for tough work environments, these high-performance, fully radiometric imagers are ideal for troubleshooting electrical installations, electro-mechanical equipment, process equipment, HVAC/R equipment and others.

•Fluke Ti25 and Ti10 imagers come with enhanced problem detection and analysis capabilities with IR-Fusion® Technology. Simply scroll through the different viewing modes quickly to better identify trouble areas in Full IR thermal, picture-in-picture, or automatic blend visual and thermal images. Fluke Ti9 imagers can be upgraded to a full Ti10 with IR-Fusion at a later time.

•Optimized for field use in harsh work environments.

•Engineered and tested to withstand a 2 m (6.5 ft) drop—When was the last time you dropped a tool?

•Withstands dust and water—tested to an IP54 rating.

•Delivers the clear, crisp images needed to find problems fast.

•Identify even small temperature differences that could indicate problems with excellent thermal sensitivity (NETD).

•Intuitive, three-button menu is easy to use—simply navigate with the push of a thumb.

•No need to carry pen and paper—record findings by speaking into the camera. Voice annotations can be recorded with every image you take. Voice comments are saved along with individual images for future reference (Ti25 only).

•Everything needed to get started is included.

•Adjustable hand strap for left-or right-handed use.

•Manufactured in the U.S.A.

Technical Data

IR-Fusion® Technology

See things both ways—infrared and visual (visible light) images fused together communicating critical information faster and easier—traditional infrared images are no longer enough.

Fluke led the way in the development and use of IR-Fusion and the industry followed. Both visible and infrared images allow you to communicate exactly where potential savings can be gained. IR-Fusion is standard on Fluke Ti25 and Ti10 models.

Detailed specifications

		Ti25		Ti10		Ti9
	Temperature
	Temperature measurement range	-20 °C to +350 °C (-4 °F to + 662 °F)		-20 °C to +250 °C (-4 °F to + 482 °F)
	(not calibrated below -10 °C)
	Accuracy	± 2 °C or 2 % (whichever is greater)		± 5 °C or 5 % (whichever is greater)
	On-screen emissivity correction	Yes		—
	Imaging performance
	Field of view	23° x 17°
	Spatial resolution (IFOV)	2.5 mRad
	Minimum focus distance	Thermal lens: 15 cm (6 in)				Thermal lens only:
		Visible (visual) light lens: 46 cm (18 in)				15 cm (6 in)
	Focus	Manual, one-handed focus
	Image frequency	9 Hz refresh rate
	Detector type	160 X 120 focal plane array, uncooled microbolometer
	Infrared lens type	20 mm F = 0.8 lens
	Thermal sensitivity (NETD)	≤ 0.1 °C at 30 °C (100 mK)		≤ 0.2 °C at 30 °C (200 mK)
	Infrared spectral band	7.5 μm to 14 μm
	Visual camera	640 x 480 resolution
	Image presentation
	Palettes	Ironbow, blue-red, high contrast,		Ironbow, blue-red, high contrast, grey
		amber, hot metal, grey
	Level and span	Smooth auto-scaling and manual scaling of level and span
	Minimum span (in manual mode)	2.5 °C (4.5 °F)		5 °C (9 °F)
	Minimum span (in auto mode)	5 °C (9 °F)		10 °C (18 °F)
	IR-Fusion® information	Full infrared with MAX, MID, or MIN		Full infrared or		No IR-Fusion. Full
		automatic blending; and picture-in-picture		picture-in-picture		Infrared only. Ti9
		with MAX, MID, or MIN automatic blending				models are upgrad-
		(Visual and IR blending)				able to a full Ti10 for
						an additional fee.*
	Picture-In-Picture (PIP)	Three levels of on-screen IR blending		100 % IR displayed
				in center		—
		displayed in center 320 x 240 pixels
				320 x 240 pixels
	Full screen (PIP off)	Three levels of on-screen IR blending		100 % IR displayed in center
		displayed in center 640 x 480 LCD		640 x 480 LCD
	Voice annotation
	Voice annotation	60 seconds maximum recording time per image		—
	Image and data storage
	Storage medium	SD memory card (2 GB memory card will store at least 1200 fully radiometric (.is2) IR and linked
		visual images each with 60 seconds voice annotations or 3000 basic (.bmp) IR images)
	File formats	Non-radiometric (.bmp) or fully-radiometric (.is2).
		No analysis software required for .bmp files.
	Export file formats	JPEG, BMP, GIF, PNG, TIFF
	w/SmartView® software

*Contact your Fluke sales representative for more information about upgrade options.

2 Fluke Corporation

Ti25, Ti10 and Ti9 Thermal Imagers