Fluke Ti200, Ti300, Ti400, TiS10, TiS20 Brochure

Fluke infrared tools

Experience. Performance. Confidence.

TEMPERATURE MEASUREMENT SOLUTIONS

FLUKE INFRARED TOOLS

Keeping your world up and running

Fluke infrared
tools are on
the job because

THEY DO
THE JOB.

EXPERIENCE is 65 years designing and building tools

recognized as the industry standard in test and measurement.
We understand that the demands on you and your tools are
continuously evolving. This drives us to keep innovating, to
learn from you what challenges you face and what you need
from your tools.

PERFORMANCE is recognizing job sites can be complex,
messy and sometimes dangerous. Your tools must excel
while helping to keep you safe in changing environments.
You want them designed for one-handed simplicity and to
deliver superb image quality and deep analytics. We call it Fit
for Purpose—tools developed for industrial use; for your use.

CONFIDENCE is knowing that the quality, accuracy and
reliability we build into every Fluke tool is the DNA of our
portfolio. We know the decisions you make from your
measurements are your reputation. You need tools that are
accurate and trustworthy so you can make the right decision.

2 3

EXPERIENCE. PERFORMANCE. CONFIDENCE.

IMAGE QUALITY

Beyond pixels

Look beyond PIXELS.
You’ll see the DIFFERENCE.

Pixels are only part of the equation that determines infrared image quality.

IMAGE QUALITY = focus + optics +
spatial resolution (pixels + field of view)

Premier focus
technologies

Getting in-focus images can be painstaking with
manual focus systems, and some autofocus systems
may not focus on your desired target. Fluke Profes­sional and Expert Series cameras include some of
the most innovative focus technologies available.

• LaserSharp® Auto Focus, only from Fluke, gives you
the fastest way to precisely focused images

• EverSharp multifocal recording gives you
edge-to-edge clarity of targets both near and
far in one image

2.25 mRad, D:S (detection) 400:1

3.39 mRad, D:S (detection) 295:1

Simply the best optics

Fluke uses only 100 % diamond-turned germanium
lenses covered with a specialty coating. This is the
most efficient material to transmit energy to the
detector to produce high quality infrared images.

Spatial resolution:
the best kept secret
to image quality

Generally, a camera with a higher num­ber of detector pixels or a narrower field
of view will have better spatial resolution.
Spatial resolution is measured in mRads,
and the smaller the number, the more
detailed the image. For Fluke infrared
cameras with standard lenses, the range
is from 0.6 mRad (best) to 7.8 mRad,
while competitive models range up to

10.3 mRad.
The images above have the same

number of detector pixels and were taken
at the same distance from the motor1,
but the top image has better spatial res­olution, and you can see more details,
mainly due to the tighter field of view.

1

Both images were taken with Fluke cameras

4 5

EXPERIENCE. PERFORMANCE. CONFIDENCE.

FLUKE CONNECT ® ASSETS

The largest system of software and wireless test tools in the world

Four ways Fluke Connect

®

can help you

manage your complex world.

Preventive maintenance simplified.

Data you can

1

trust and trace

Get paper-free preventive maintenance by
capturing infrared images using AutoRecord™
measurements and associating them to assets.
With Fluke Connect® Assets, you can securely
save images to the Fluke Cloud™ so approved
team members can access the images from
their smartphones, whenever and wherever
they need to.

3

Save time reporting

Optimize and analyze images from your mobile device and generate reports
with ease to share your findings. Incorporate multiple measurement types
including thermal images, electrical, vibration, and more all in one report—
more than 30 wireless-enabled tools available.

See your measurement

2

Download the phone app at:

data all in one place

Maximize uptime by using the comprehensive overviews
provided by Asset Status and Asset Health dashboards.
These dashboards provide detailed measurement
information and actionable maintenance data. Easily spot
anomalies as they emerge and compare to historical and
baseline views to instantly see concerns.

Free trial terms: Open to those 18 years or older (or the age of majority under applicable law, whichever is
older). Free trial is for a limited duration and is offered for a limited time. Void where prohibited by law. Full
terms and conditions at: fluke.com/FCfreetrial.

©2015 Fluke Cor poration. All trademarks are the property of their respect ive owners. WiFi or cellular ser­vice required to share data. Smart phone, wireless service and data plan not included with purchase. First
5 GB of storage is free. Phone support details can be viewed at fluke.com/phones.

Share from anywhere

4

Collaborate easier than ever by texting or emailing images to get questions
answered or next steps authorized. Or start a ShareLive™ video call so your
colleague can see exactly what you're seeing.

SEE IT. SAVE IT. SHARE IT.

Start your free trial at www.flukeconnect.com/freetrial

6 7

EXPERIENCE. PERFORMANCE. CONFIDENCE.

THE EXPERT SERIES

TiX1000/660/640

The future of infrared is here
in STUNNING HD resolution.

Your work as an expert thermographer is defined by the quality
of the infrared images you take and your ability to analyze what’s
before you. The most pressing challenge lies not in analyzing what
you see, but the fear of missing something you can’t.

It’s time to see what you’re missing.

Up to 3.1 million pixels with SuperResolution.

Instantly capture highly detailed images and start
analyzing your images while still in the field. See
incredible detail from a distance or extremely close
up. On camera, you get up to 10x the pixels of a
standard 320x240 camera (based on the TiX1000).

SuperResolution mode, available when viewed
in SmartView® software, lets you see HD resolution
with up to 3.1 million pixels —4x the on-camera
standard resolution.

Step 1. Step 2. Step 3. Step 4.

SuperResolution shifts the sensitive
elements 4x and fills the spaces,
resulting in 100 % coverage and an
image with 4x more resolution.

The industry’s
most advanced
focus options.

LaserSharp® Auto Focus1 gives you the fastest way to
precisely focused images by calculating the distance
to your target with a laser distance meter.

EverSharp multifocal recording gives you edge­to-edge clarity of targets both near and far in one
image, which is created by capturing multiple
images from varying focal distances.

2

TiX1000/660/640

• Capture the tough shots with a large 5.6 inch articulating LCD display

• Optimized for outdoor inspections with viewfinder that reduces outdoor glare

• High temperature option up to 2000 °C

• Capture spectacular images close up or from a distance with your choice of seven optional lenses

• Identify rapid changes in temperature with the optional Subwindowing feature (up to 240 Hz)

• Save and share images from the field with your team with the Fluke Connect® app

1

Features vary by model; see pages 22-23 for model specifications

2

Compared to industrial infared cameras without a user-designated laser-focus feature

8 9

EXPERIENCE. PERFORMANCE. CONFIDENCE.

1

1

THE EXPERT SERIES

TiX560/520

Your view of infrared technology
is about to change 180°.

You need maximum flexibility with an ergonomic design that allows
you to easily navigate over, under and around hard-to-reach objects.
With an articulating lens that rotates a full 180 degrees and the largest

5.7 inch touchscreen LCD, you can aim and focus from a comfortable
angle and easily capture the target that was once impossible to see.

Premium viewing with the
largest 5.7 inch touchscreen LCD.

With 150 % more viewing area1, easily annotate,
edit and analyze images with the largest touchscreen
LCD in its class2.

Get 4x the pixels with
SuperResolution.

Instantly capture highly detailed images and start analyzing your
images while still in the field with on camera analytics.
See incredible detail from a distance or close up.

SuperResolution mode (available on camera in the TiX560) turns
your 320x240 images into 640x480 images, 4x the resolution
and pixels.

Step 1. Step 2. Step 3. Step 4.

SuperResolution shifts the sensitive
elements 4x and fills the spaces,
resulting in 100 % coverage and an
image with 4x more resolution.

TiX560/520

• Easily navigate over, under and around objects with the 180° articulating lens

• Quick and easy in-field analysis with post-capture image processing—edit emissivity, background

temperature, transmissivity, palettes, color alarms, IR-Fusion and enable/disable markers—all on camera

• Get premium image output in high temp applications by combining multiple sequential frames of data into
one with Image Sharpening (TiX560)

• Find subtle temperature differences easier—instantly improve thermal sensitivity from 45 mK to 30 mK
with Filter mode (TiX560)

• Monitor processes with video recording, live video streaming, remote control (TiX560 only), or
auto capture

• Optional lenses—inspect targets that would be challenging to see with a standard IR lens due to size and
distance. 2x and 4x telephoto, 25 micron macro, and wide angle pre-calibrated smart lenses available

• Save and share images from the field with your team with the Fluke Connect® app

1

Compared to a 3.5 inch screen.

2

Compared to industrial handheld thermal imagers with 320x240 detector resolution as of October 14, 2014.

10 11

EXPERIENCE. PERFORMANCE. CONFIDENCE.

THE PROFESSIONAL SERIES

Ti400/300/200

Autofocus REDEFINED.

LaserSharp® Auto Focus.
On target and in focus. Every. Single. Time.

You’re it when it comes to getting the right answers—there’s no
room for fuzzy, out-of-focus infrared images. Potential problems hide
behind incorrect readings, which is why you need a camera with
LaserSharp® Auto Focus for crisp, sharp images every, single time.

Precisely focused images

If your image is out of focus, temperature measurements could be off
by up to 20 degrees or more. Getting crisp images in manual focus
takes time and careful attention. With LaserSharp® Auto Focus, exclu­sive to Fluke, you get an in-focus image of your designated target
with the push of a button. The built-in laser distance meter instantly
calculates and displays the distance to your target, and the focus
engine immediately adjusts the focus.

Navigate easier
than ever

The Professional Series cameras have a stunningly
clear 3.5-inch, 640 x 480 high resolution respon­sive touch screen to easily spot problems, with
intuitive controls to quickly navigate to the next
image or switch modes. Plus, all camera features
can be accessed one-handed—even with gloves —
because of the large buttons.

Many inspection sites are challenging
for certain autofocus systems.

Passive autofocus systems may on ly
capture the near-field subject (fence).

Red laser dot confirms LaserSharp
Auto Focus captures your target.

LaserSharp® Auto Focus gives
you in-focus images

Ti400/300/200

• Get the context of the visual and infrared details all in one precisely blended or picture-in-picture

image with IR-Fusion® technology

• Inspect high-temperature components, up to 1200 °C (2192 °F)

• Digitally document critical information with your infrared image using IR-PhotoNotesTM, voice

annotation, or text annotation

• Monitor processes with video recording, live video streaming, remote control1, or auto capture

• 2 in 1 tool—see the distance to your target on the screen with the included laser distance meter

• Optional lenses—inspect targets that would be challenging to see with a standard IR lens due to size

and distance. 2x and 4x telephoto and wide angle pre-calibrated smart lenses available

• Save and share images from the field with your team with the Fluke Connect® app

1

Varies by model; see pages 22-23 for model specifications

1

1

12 13

EXPERIENCE. PERFORMANCE. CONFIDENCE.

THE PERFORMANCE SERIES

TiS65/60/55/50/45/40/20/10

Rugged, reliable
PERFORMANCE from Fluke.

You need an easy to use high performance infrared camera that helps
you quickly identify small details that could indicate a big problem.

Precisely blended images
offer more detail

Image quality is everything when it comes to quickly analyzing
infrared images. You need the right level of detail in your infrared
image to pinpoint specific areas of concern. Fluke Performance Series
IR cameras blend visible light and infrared images using patented
IR-Fusion® technology1 to capture a clear 5MP real-world picture of
your target. Blend at different preset levels and add picture-in-picture
(PIP) to capture an incredibly revealing hybrid image.

Designed for
your environment

Easily see potential problems with the large

3.5 inch LCD, a full 32 % larger than many com­petitive models. And with a rugged one handed
design (right or left handed) you can easily work
up a ladder or in virtually any environment.

Full IR

75 % Blending

PIP mode

IR-Fusion® technology captures
revealing blended images

1

TiS65/60/55/50/45/40/20/10

• See more details with improved resolution that delivers the right image quality you need to make the proper diagnosis
with up to 2.52 times more pixels and 70 %2 better D:S

• Reduce the amount of time it takes to get an in focus image with manual or fixed focus options

• Securely store and manage your images from anywhere

– WiFi upload to Fluke Cloud
– Free storage3 with Fluke Cloud
– Share images in real-time with Fluke Connect
– Removable 4GB micro SD card

– Voice annotation

• Monitor your battery charge and avoid an unexpected loss of power with the smart battery with LED charge indicator

• Create and email reports from the jobsite with Fluke Connect®, eliminating the need to go back to the office to

process reports

1

IR-Fusion® and picture-in-picture mode execution varies by model; see pages 22-23 for model specifications

2

Compared to the Fluke Ti1xx infrared cameras

3

5 GB of free storage

4

Within your provider’s wireless service area; Fluke Connect® is not available in all countries

5

Varies by model; see pages 22-23 for model specifications

5

4

TM

TM

®

4

14 15

EXPERIENCE. PERFORMANCE. CONFIDENCE.

VISUAL IR THERMOMETER

VT04/VT04A

Designed to SEE IT ALL.

Say good-bye to spot-by-spot readings. An infrared heat map
superimposed over a visual image provides the context you need
to clearly see temperature-related issues—priced to outfit the
whole team.

Blended heat map
for better analysis

See issues in context by blending the infrared heat map with a visual
image, and get the detail you need by choosing one of five on-screen
blending modes. See aligned images from as close as 15 cm (6 in) in
near mode or from a distance in far mode. Plus, obtain accurate tem­perature readings without taking your eyes off the screen. The center
measurement box shows the exact area of temperature measurement.
Fill that center box with your target and rest assured you’re not mea­suring the background.

Automate your
inspections

25 % blended heat map

Monitor equipment over time by setting up your
camera to take time-lapse images automatically.
Easily configure high and low temperature alarms.
Then blend images and select the best palette to
pinpoint issues and create quick reports with the
included Fluke SmartView® software.

50 % blended heat map

75 % blended heat map

These blended V T04 images
show the breaker number that
is hot.

VT04/VT04A

• Handy when you need it; easily fits in your tool bag or pocket

• Intuitive enough to use right out of the box

• Easily access saved images with the removable SD card

• Save in .bmp format when you only want the image, or choose .is2 format so you can optimize images and

create reports in SmartView® software

• Protect your visual IR thermometer with the included hard case (VT04) or soft case (VT04A)

• Choose your preferred way of powering your visual IR thermometer: a rechargeable Li-ion battery (VT04)

or 4 AA batteries (VT04A)

16 17

EXPERIENCE. PERFORMANCE. CONFIDENCE.

IR THERMOMETER

572-2/568/62 MAX+

For FAST, EASY,
DEPENDABLE readings,
this is the go-to tool.

For a quick temperature reading, it doesn’t get much easier than an
IR Thermometer from Fluke. So rugged and fast you’ll always want
to keep it with you.

Quick and simple
measurements

With a start-up time of a mere second, you’ll never have to wait on
your tool. Simply pull the trigger and instantly get a spot measure­ment. Laser guides show where you’re measuring, and dual lasers on
some models indicate the area the measurement is based on.

Rugged, ready
and reliable

You have a tough job. Tough on you and your tools.
That’s why Fluke IR thermometers are ready for
action even in harsh conditions—tested to withstand
dust and water with an IP54 rating1. Some can even
survive a 3 meter drop1. For rugged reliability, it’s
tough to beat Fluke.

572-2/568/62 MAX+

• Measure accurately from farther away with up to a 60:1 distance to spot ratio
(572-2 6 0:1, 568 50:1, 62 M A X+ 12:1)

• Measure temperatures up to 900 °C (1652 °F)
(572-2 -30 °C to +900 °C (-22 °F to +1652 °F), 568 -30 °C to +800 °C (-22 °F to +1472 °F),
62 Max+ -30 °C to +650 °C (-22 °F to +1202 °F)

• Save time with available onboard, downloadable data storage of temperature readings
(572-2 and 568 models)

• Get contact measurement with 2-in-1 IR thermometers (572-2 and 568 models)

• Intrinsically safe model available for use in hazardous environments including oil and gas (568 Ex).

See 568 Ex product page on Fluke website for details

• Identify the area you’re measuring with dual-laser sighting on the 572-2 and the 62 Max+
or with single-laser sighting on the 568

• Get alerts when a temperature is outside the expected range with high and low alarms on all three
models and continuous monitoring on the 572-2 and 568

• Get a three-year warranty with the 62 Max+ (572-2 and 568 have a two-year warranty)

1

Testing was done on the 62 Max and 62 Max+

18 19

EXPERIENCE. PERFORMANCE. CONFIDENCE.

IR WINDOWS

CV400/300/200

ACCESSORIES

Increase the safety and
speed of your electrical
infrared inspections.

A company’s greatest investment is not the equipment that’s behind
the panel door. It’s the electricians, engineers and inspectors who
risk their lives every day doing their jobs.

See the impossible.

Infrared lenses can make it possible to inspect targets
that would be challenging to see with a standard IR lens
due to their size and distance.

TiX560—standard lens

TiX560—4x telephoto lens

CV400/401/300/301/200/201

• Highest arc blast safety rating available—63 kA when properly installed

• Under 5 minute installation with 1 person; no need to remove panel door

• Available in 2 inch (50 mm), 3 inch (75 mm), and 4 inch (95 mm) sizes with convenient ¼ turn access

or security key access options

• Clearly view equipment both visually and thermally with ClirVu® coating that protects the optic
from the elements

• Corrosion and UV resistant for challenging outdoor environments—IP67 rugged

TiX560—standard lens

Expand the capabilities of your infrared camera

• Lenses—Capture images close up or from a distance with optional lenses, available with Expert and
Professional series cameras.

• Batteries and chargers—All Fluke Professional and Performance Series cameras feature interchange­able batteries. Expand your powering capabilities with a car charger, extra battery, or charging base.

• Tripod mounts—Capture images from a tripod using your Professional or Performance Series camera
with a tripod mount. Expert Series models have built-in tripod mounts.

• Sun visors—Reduce LCD screen glare. Available for Professional and Performance Series models.

• CarePlans—Gold and Silver CarePlans available for all Professional and Performance models as well as

the Expert Series TiX520 and TiX560.

• SmartView® software—Analyze images, adjust blending and palette, export to multiple file formats,
and create professional reports with Fluke SmartView® software. Download your copy for free from the
Fluke website.

Not all accessories are interchangeable. Visit the Fluke website to see which accessories are recommended for your
specific product.

TiX560—25 micron macro lens

20 21

EXPERIENCE. PERFORMANCE. CONFIDENCE.

SPECIFICATIONS

Expert Series IR Cameras Professional Series IR Cameras Performance Series IR Cameras Visual IR Thermometers

TiX1000 TiX660 TiX640 TiX560 TiX520 Ti400 Ti300 Ti200 TiS65 TiS60 TiS55 TiS50 TiS45 TiS40 TiS20 TiS10 VT04/VT04A

IFOV
(spatial resolution)

Distance to spot (D:S)
(detection)

Detector resolution

Field of view 32.4° H x 24.7° V 30.9 °H x 23.1 °V 24 °H x 17°V 35.7°H x 26.8°V 28 °H x 28 °V

0.6 mRad 0.8 mRad 1.31 m Rad 1.75 m Ra d 2.09 mRad 2.4 mRad 2.8 mRad 3.9 mRad 5.2 mRad 7.8 mR ad —

1811:1 118 7:1 764:1 573:1 477:1 417:1 353:1 257:1 193:1 128:1

1024 x 768

(786,432 pixels)

Super Resolution

mode: 2048 x

1536 (3,145,728

pixels)

640 x 480

(307,200 pixels)

Super Resolution
mode: 1280 x 960
(1,228,800 pixels)

640 x 480

(307,200 pixels)

320 x 240 (76,800 pixels)

Super Resolution mode: 640 x 480

(307,200 pixels)

320 x 240

(76,800 pixels)

240 x 180

(43,200 pixels)

200 x 150

(30,000 pixels)

260 x 195 (50,700 pixels) 220 x 165 (36,300 pixels) 160 x 120 (19,200 pixels)

120 x 90 (10,800

pixels)

80 x 60

(4,800 pixels)

Detection—43:1;

measurement— 9:1

31 x 31 (961 pixels)

Optional lenses

Wireless connectivity

Focus system

IR-Fusion® technology/
visible context

Display

Design

Thermal sensitivity

Temperature
measurement range

Capture spec tacular images close up or from a distance

with optional lenses: 2 wide angle,

2 telephoto, and 3 macro

1

Fluke Connect® app compatible with

Fluke Connect® WiFi SD Card

1

Autofocus,

LaserSharp® Auto Focus,

autofocus, manual focus, and

EverSharp multifocal recording

manual focus,

and EverSharp

multifocal
recording

IR-Fusion® AutoBlend mode and

Picture-in-Picture, continuous blending

Extra-large 5.6 inch color TFT display, 1280 × 800 pi xel

resolut ion, suitable for daylight operat ion

Camcorder wit h handle, tiltable LCoS

color viewfinder display,

Camcorder

800 × 60 0 pixel resolution

≤ 0.05 °C at 30 °C

target temp

(50 mK)

-40 °C to +1200 °C
(-40 °F to 2192 °F)

High temperature option: up to

2000 °C (3632 °F)

≤ 0.03 °C at 30 °C target temp

(30 mK)

-40 °C to

+1200 °C (-40 °F

to 2192 °F)

Optional 2x and 4x telephoto,

25 micron macro, and wide angle

pre-calibrated smart lenses available

LaserSharp® Auto Focus with built-in laser distance meter

and advanced manual focus

IR-Fusion® AutoBlend mode and Picture-in-Picture

5.7 inch touchscreen LCD,

640 x 480 pixel resolution

Ergonomic FlexCam design with a

180 degree articulating lens

≤ 0.045 °C at

30 °C target temp

(45 mK);

Filter mode (NETD

improvement)

≤ 0.03 °C at

30 °C target temp

(30 mK)

-20 °C to

+1200 °C

(-4 °F

to +2192 °F)

≤ 0.05 °C at

30 °C target temp

(50 mK);

Filter mode (NETD

improvement)

≤ 0.04 °C at

30 °C target temp

(40 mK)

-20 °C to
+850 °C
(-4 °F to

+1562 °F)

Optional 2x and 4x telephoto and wide angle

pre-calibrated smart lenses available

Fluke Connect® app compatible. Wireless connectivity to PC, i Phone® and iPad®

(iOS 4s and later), AndroidTM 4.3 and up, and WiFi to LA N

1

—

—

Manua l focus Fixed focus Manual focus Fixed focus Manual focus Fixed focus Fixed focus

IR-Fusion® AutoBlend mode and Picture-in-Picture—

5 presets (0 %, 25 %, 50 %, 75 %, 100 %)

IR-Fusion®

AutoBlend

mode—

3 presets (0 %,

50 %, 100 %)

—

Infrared heat map and visual

image blending in 25 %

increments; center box to outline

the temperature measurement

area

3.5 inch touchscreen LCD, 640 x 480 pixel resolution 3.5 inch (landscape) 320 x 240 LCD 2.2 inch portrait standard TFT LCD

Rugged, ergonom ic design for one-handed use; IP54

rated for protection against dust, limited ingress; and

Rugged, lightweight, ergonomic design for one-handed use Slim, pocket-sized design

protection against water spray

≤ 0.05 °C at 30 °C target temp

(50mK)

-20 °C to

+1200 °C

(-4 °F to

-20 °C to +650 °C

(-4 °F to +1202 °F)

+2192 ° F)

≤ 0.075 °C at

30 °C target temp

(75mK)

≤ 0.08 °C at 30 °C target temp (80 mK)

-20 °C to +550 °C
(–4 °F to 1022 °F)

-20 °C to + 450 °C
(–4 °F to 842 °F)

≤ 0.09 °C at 30 °C target temp

(90 mK)

-20 °C to +350 °C (–4 °F to 662 °F)

≤ 0.10 °C at

30 °C target temp

(100 mK)

≤ 0.15 °C at

30 °C target temp

(150 mK)

-20 °C

to +250 °C

(–4 °F to 482 °F)

250 mK

-10 °C to +250 °C

(+14 °F to +482 °F)

30 Hz or

Frame rate

9 Hz versions

(Subwindowing

options available

60 Hz or 9 Hz versions (Subwindowing

options available up to 240 fps)

60 Hz or 9 Hz versions

9 Hz or 30 Hz

versions

9 Hz

9 Hz or 30 Hz

versions

9 Hz

9 Hz or 30 Hz

versions

9 Hz 8 Hz

up to 240 fps)

1

Software SmartView® software and Fluke Connect

Documentation
features

Voice annotation and text annotation

IR-PhotoNotesTM, voice annotation,

and text annotation

IR-PhotoNotesTM

and voice annotation

IR-PhotoNotesTM (3 images),

voice annotation—Bluetooth Headset

®

(sold separately)

IR-PhotoNotesTM (1 image),

voice annotation—Bluetooth Headset

(sold separately)

Voice annotation—Bluetooth

Headset (sold separately)

SmartView® software

—

Video recording Standard and radiometric —

Streaming video
(remote display)

Via HDMI; GigE Ethernet available

in SmartView® software

Via USB or WiFi —

Remote control Yes. Available in 2015 Yes - Yes —

Alarms High-temperature, low-temperature, and isotherm

High temperature,

low temperature

—

High/low temperature alarms,

time-lapse image capture,

auto-monitor alarm

Warranty Two-years (standard), extended warranties are available Two years

1

Within your provider’s wireless service area; Fluke Connect® is not available in all countries.

22 23

EXPERIENCE. PERFORMANCE. CONFIDENCE.

Fluke infrared
tools are on
the job because
they do the job.

Expert Series

When you cannot be wrong, the
Expert Series offers extremely
detailed images. Plus, view images
on a large articulating display—up
to 5.7 inches.

Professional Series

Focus with laser speed and
accuracy on your designated
target with LaserSharp® Auto
Focus. Get highly detailed images
and advanced features.

Visit:

fluke.com/infraredcameras

Questions?

Call 1-800-760-4523, email
[e-mail] or go
to our website and request your
free product demonstration.

Fluke training

Between our online videos and
seminars and live classes with
our training partner, The Snell
Group, you can continue to grow
as a thermographer and infrared
technician.

Performance Series

Get detailed images in an
affordable infrared camera that’s
rugged and reliable. The perfect
tool for a quick inspection.

Visual IR Thermometer

An infrared heat map with hot
and cold markers reveals potential
areas of concern. See issues in
context by blending the heat map
with a visual image.

IR Thermometer

Get a quick temperature reading,
even from a distance, with up to
a 60:1 distance to spot ratio and a
start-up time of a mere second.

Fluke. Keeping your world up and running.

Fluke Corporation
PO Box 9090, Everett, WA 98206 U.S.A.

Fluke Europe B.V.
PO Box 1186, 5602 BD
Eindhoven, The Netherlands

Modification of this document is not
permitted without written permission
from Fluke Corporation.

For more information call:

In the U.S.A. [phone] or
Fax [phone]
In Europe/M-East/Africa [phone] or
Fax [phone]
In Canada (800)-36-FLUKE or
Fax [phone]
From other countries [phone] or
Fax [phone]
Web access: http://www.fluke.com

©2006-2015 Fluke Corporation. All trademarks are the
property of their respective owners. Specifications subject
to change without notice. 6/2015 2674264r-en

®