Fluke Ti100-FC, TiR110, TiR125 Data sheet

TiR125, TiR110,
TiR105 Building
Diagnostic and the
TiR110
Ti100 General Use
Thermal Imagers
The lightest, most-rugged, easiest–to-use professional thermal imagers around.
Key features
Made in
the U.S.A.
of U.S. and
non U.S.
parts
enabled
TiR125
Ti100
Fluke CNX
Building problems, defects and general maintenance
Energy audit, building inspection, and weatherization
TiR105
•Exclusive IR-OptiFlex in good focus from 1.2 m (4 ft) and beyond for optimum image clarity and scanning convenience. For shorter distances change to manual mode with the touch of a finger (TiR110 and TiR125).
•Always have references handy—IR-PhotoNotes system—Quickly identify and keep track of inspection locations by adding digital images of important information and surrounding areas (TiR110 and TiR125).
•Find problems faster and easier with Fluke IR-Fusion (TiR125, TiR110, TiR105). Accurately identify potential issues by combining digital and IR images.
•Capture additional measurements fast and conveniently from up to five wireless modules at once using your Fluke thermal imager and CNX
•Get further clarification with AutoBlend of a digital and partially transparent IR image into a single information-filled image (TiR125 only).
•Multi-mode video recording—focus-free video in visible light and infrared with full IR-Fusion (TiR110 and TiR125 only).
•Easily communicate the location of problems with the Electronic 8-Point Cardinal Compass (TiR125 and TiR110 only).
Technical Data
focus system—ensures that images are
annotation
wireless modules.
mode - the blending
®
technology
Restoration, water damage, and roofing
Patented Fluke IR-Fusion® Technology
Enjoy the industry’s only point-and-shoot IR-Fusion camera. Fluke patented technology provides the user with both a digital and an infrared image in one to precisely document problem areas.
Spend less time in the field and more time growing your business with these new Fluke thermal imagers.
IR-OptiFlex focus system
Scan for issues significantly faster than before with Fluke’s revolutionary, ultra-rugged focus system. The IR-OptiFlex focus system gives you optimum focus by combining focus-free, ease-of-use with the flexibility of manual focus on the same camera.
Detailed specifications
TiR125 TiR110 TiR105 Ti100
Building diagnostics General use
IR resolution (FPA size) 160 x 120 FPA Uncooled Microbolometer Spectral band 7.5 μm to 14 μm (long wave) Capture or refresh rate 9 Hz
NETD (Thermal sensitivity) ≤ 0.08 °C at 30 °C target temp (80 mK)
FOV (Field of view) 22.5 °H x 31 °V IFOV (Spatial resolution) 3.39 mRad Temperature measurement range
(not calibrated below -10 °C)
-20 °C to +150 °C (-4 °F to +302 °F)
Temperature measurement accuracy ± 2 °C or 2 % (at 25 °C nominal, whichever is greater) Focus mechanism IR-OptiFlex
IR-Fusion
CNX
®
technology
Wireless enabled Yes
PIP, FULL IR, FULL VISIBLE,
AutoBlend
focus system Focus-free 1.2 m (4 ft) and beyond
PIP (1.2 m (4 ft)
PIP, FULL IR, FULL VISIBLE
to 4.6 m (15 ft)), FULL IR,
FULL VISIBLE
High termperature, low
Color alarms
temperature (dewpoint), and
Low temperature (dewpoint)
isotherm
Standard palettes
Blue-Red, Grayscale, Inverted Grayscale, High-contrast,
Hot Metal, Ironbow, Amber, Inverted Amber
Blue-Red, Ironbow, Grayscale,
Blue-Red, Grayscale, Inverted
Ultra Contrast
palettes
Grayscale, High-contrast,
Hot Metal, Ironbow, Amber,
Blue-Red, Grayscale, Ironbow
Inverted Amber
Hot/cold markers Yes User definable spot markers Three on camera and in SmartView
®
in SmartView® only
Centerpoint Yes Centerbox (MIN/AVG/MAX) Yes Level and span control Manual and auto Minimum span in auto mode 2.5 °C 5 °C Minimum span in manual mode 2.0 °C 2.5 °C Minimum IR focus distance 15.25 cm (6 in) 122 cm (48 in) Weight 0.726 kg (1.6 lb) Size 28.4 x 8.6 x 13.5 cm (11.2 x 3.4 x 5.3 in) LCD display 3.5 inch diagonal (portrait format) Visible camera 2 megapixel industrial-grade N/A Minimum parallax ~45.7 – 55.9 cm (~ 18 in – 22 in) ~122 cm (48 in) N/A IR-PhotoNotes
annotation system Yes (3 images)
Laser pointer Yes Torch Yes Electronic (cardinal) compass Yes Emissivity correction Yes Transmission correction Yes Background (reflected) compensation Yes Voice annotation (audio) Yes (60 seconds) per image Multi-mode video output Streaming USB video output Multi-mode video recording
(standard AVI with MPEG encoding)
Multi-mode video recording (radiometric .is3)
Yes, radiometric .is3 for approx. 2.5 to 5 minutes de­pending upon thermal scene
Yes (AVI with MPEG encoding)
Memory review thumbnail review Battery (field-replaceable,
rechargeable)
Two One
Battery life 4+ hours (each)* External battery charging base Included Optional (accessory) Charging power supply Ye s
*Assumes 50 % brightness of LCD
≤ 0.10 °C at 30 °C target temp
(100 mK)
-20 °C to + 250 °C (-4 °F to 482 °F)
No, full IR only
Amber
2 Fluke Corporation TiR125, TiR110, TiR105 Building Diagnostic and Ti100 General Use Thermal Imagers
TiR125 TiR110 TiR105 Ti100
Buidling diagnostics General use
Drop test 2 meter (6.5 feet) Ingress protection (IP) rating
(IEC 60529) Est. calibration cycle Two-years Multifunction card reader Included Memory storage 2 GB SD memory card Direct download capability mini USB direct download Operating temperature range -10 °C to +50 °C (14 °F to 122 °F) Storage temperature range -20 °C to +50 °C (-4 °F to 122 °F) Operating humidity Operating and storage 10 % to 95 %, non-condensing Vibration and shock 2G, IEC 68-2-26 and 25G, IEC 68-2-29 Safety standards CSA (US and CAN): C22.2 No. 61010-1-04, UL: UL STD 61010-1 (2nd Edition), ISA: 82.02.01 C Tick IEC/EN 61326-1 EMI, RFI, EMC EN61326-1; FCC Part 5
User manuals
Standard warranty period Two-years Extended warranty and service plans Yes
Czech, English, Finnish, French, German, Italian, Japanese, Korean, Polish, Portuguese, Russian,
Simplified Chinese, Spanish, Swedish, Traditional Chinese, Turkish, Dutch, and Hungarian
IP 54
Ordering information
FLK-TiR125 9HZ Building Diagnostics Thermal Imager FLK-TiR110 9HZ Building Diagnostics Thermal Imager FLK-TiR105 9HZ Building Diagnostics Thermal Imager FLK-TI100 9HZ General Use Thermal Imager
Included with product
Thermal imagers are shipped with ac power adapter, lithium ion smart battery (TiR125 includes two each—other models one each), USB cable, SD memory card, hard carrying case, soft transport bag, adjustable hand strap (left- or right-handed use), printed users manual in English, Spanish, French, German and Simplified
®
Chinese, others on CD, SmartView
software and warranty registration card. TiR125 model also includes a two-bay charging base and a multi-format USB memory card reader.
Optional:
FLK-TI-VISOR2 Sun visor FLK-TI-TRIPOD2 Tripod mounting accessory BOOK-ITP Introduction to Thermography Principles Book FLK-TI-SBC3 External charging base and power supply FLK-TI-SBP3 Extra lithium-ion rechargeable smart battery TI-CAR CHARGER Thermal imager vehicle charger
Not available in all countries.
For more information on CNX and other CNX
solutions go to www.fluke.com/cnx
wireless thermal imagers
CNX wireless modules
FLK-CNX i3000 iFlex
AC Current Clamp Module
FLK-CNX a3000 AC Current Clamp Module FLK-CNX v3000 AC Voltage Module FLK-CNX t3000 K-Type Temperature Module
Fluke Corporation
PO Box 9090, Everett, WA 98206 U.S.A. Fluke Europe B.V.
PO Box 1186, 5602 BD Eindhoven, The Netherlands
For more information call: In the U.S.A. (800) 443-5853 or Fax (425) 446-5116 In Europe/M-East/Africa +31 (0) 40 2675 200 or Fax +31 (0) 40 2675 222 In Canada (800)-36-FLUKE or Fax (905) 890-6866 From other countries +1 (425) 446-5500 or Fax +1 (425) 446-5116 Web access: http://www.fluke.com
©2012-2013 Fluke Corporation. Specifications subject to change without notice. Printed in U.S.A. 3/2013 4026536E_EN
Modification of this document is not permitted without written permission from Fluke Corporation.
3 Fluke Corporation TiR125, TiR110, TiR105 Building Diagnostic and Ti100 General Use Thermal Imagers
Loading...