Fluke T6-600, T6-1000 QuickStart Guide

HOLD

Quick Reference Guide
GuÍa de referencia rápida
Guia de referência rápida

T6-600/T6-1000

Electrical Tester

with FieldSense Technology

»

�� See “Safety Information”.

Go to www.fluke.com to register your product and find more information, or
download this Quick Reference Guide in other languages.
Consulte las “Información sobre seguridad”.

Vaya a www.fluke.com para registrar el producto y obtener más información, o
descargue esta Guía de referencia rápida en otros idiomas.

Consulte o “Informações de Segurança”. Acesse www.fluke.com.br para
registrar seu produto e obter mais informações, ou baixe este Guia de
referência rápida em outros idiomas.

Fork Opening 17.8 mm

CAT 600 V

AUTO

SELECT

T6-100 0

ELECTRICAL TESTER

CAT

1000 V

200 A

HOLD

PN 4897598 September 2017 Rev. 1, 10/17

PN 4897598 September 2017

© 2017 Fluke Corporation. All rights reserved.

© 2017 Fluke Corporation. All rights reserved.
Specifications are subject to change without notification.

Specifications are subject to change without notification.

1

2

6

3
4

5

7

Overview

Wire Position

1

CAT 600 V

200 A

Finger Guard

2

Display

3

X Hazardous Voltage ≥30 V

4

5

Function Selection/On/Off

6

FieldSense

CAT

1000 V

Ground Contact

7

Test Probes/Storage Dock

1 Wire Only

For safe operation,
hold the Tester behind
the finger guard.

Symbols

WARNING. RISK OF DANGER.

Consult user documentation.

Hazardous voltage ≥30 V.

Battery full charge.

Battery low. Replace.

Back light

Test with fork and FieldSense ground contact.

Test with fork and ground probe.

Test with probes.

FieldSense Measurement:
Fluke voltage/current sensing technique.

Good earth ground connection.

No earth ground connection.

Replacement Parts

Test Lead Assembly (T5-RLS) Replace
only with Fluke double-insulated
leads (T)

TP1 Probe Set, Flat-Blade

Battery Door

Battery Door Screw

Use only specified replacement parts.

Lead Replacement

PN 4462973

PN 4462973

PN 648128

PN 648128

PN 4944370

PN 4944370

PN 1618579

PN 1618579

Specifications

Model T6-1000

Function

FieldSense

Voltage ac

FieldSense

Current ac

FieldSense

Frequency (Hz)

Model T6-600Model T6-1000Model T6-1000

Auto Off

15 min

Voltage ac

Voltage dc

Resistance

[1] Accuracy: ± ( [ % of reading] + [number of least significant digits] ). Accuracy is specified for 1 year after calibration,
at 18 °C to 28 °C (64 °F to 82 °F) with relative humidity to 90 %. AC measurements are ac coupled, RMS responding.
[2] Add 3 % without an external ground connection. External ground connection required for user wearing insulated
gloves, standing on an insulated ladder, or otherwise insulated from earth ground.
[3] FieldSense is specified from 16 V to 100 % of range.

Fork Opening 17.8 mm

Calibration 1-year calibration cycle

Temperature
Operating -10 °C to +50 °C (+14 °F to +122 °F)
Storage -30 °C to +60 °C (-22 °F to +140 °F)

Altitude

Operating
Storage

Relative Humidity 0 % to 95 %, 5 °C to 30 °C (41 °F to 86 °F)
0 % to 75 %, 30 °C to 40 °C (86 °F to 104 °F)
0 % to 45 %, 40 °C to 50 °C (104 °F to 122 °F)

Battery Type and Life 2x AA (IEC LR6) 360 hr continuous, typical is 200 hr using the FieldSense function

Temperature coefficient 0.1 x (specified accuracy) / °C for <18 °C or >28 °C (<64.4 °F or >82.4 °F)

Requires

Test Leads

No

No

No

Yes

Yes

Yes

Yes

Yes

2000 m
10 000 m

Range

1000 V

200.0 A

45 Hz to 66 Hz

1000 V

1000 V

2000 Ω 2000 Ω

20.00 kΩ

100.0 kΩ

Model T6-600

Range

600 V

200.0 A

600 V

600 V

Resolution

1 V

0.1 A

1 Hz

1 V

1 V

1 Ω

0.01 kΩ

0.1 kΩ

[1]

Accuracy

±(3 % + 3 counts)
45 Hz to 66 Hz

±(3 % + 3 counts)
45 Hz to 66 Hz

±(1 % + 2 counts)

±(1.5 % + 2 counts)
45 Hz to 66 Hz

±(1 % + 2 counts)

±(1 % + 2 counts)

[2][3]

[3]

Accessories

● HT6 Belt Holster

● TPAK Hanger

● PRV240FS

● AC285 SureGrip™ Alligator Clips

● AC220 SureGrip™ Alligator Clips

Contact Fluke

USA: 1-800-44-FLUKE (1-800-443-5853)
Canada: 1-800-36-FLUKE (1-800-363-5853)
Europe: [phone]
Japan: [phone]
Singapore: [phone]
China: [phone]
Anywhere in the world: [phone]

A

CAT

HOLD

HOLD

T6 - 1000

Electrical Tester

HOLD

Hz

FieldSense

T6 - 1000

Electrical Tester

HOLD

Hz

FieldSense

200 A

CAT

1000 V

CAT 600 V

How to Make MeasurementsHow to Make Measurements

1

2A

2B

/

HOLD

45 Hz - 66 Hz
T6-600 max: 600 V rms CAT III

(AC)

T6-1000 max: 1000 V rms CAT III
600 V rms CAT IV

T6-600 max: 600 V CAT III
T6-1000 max: 1000 V CAT III

(DC)

600 V CAT IV

Model T6-1000

1

HOLD

2

Use the Ground Probe

3

Hz

/ / /

1

HOLD

Hz

2

Insert Test Probes
into the storage dock

3

Hold hand firmly on
FieldSense
Ground Contact

Hz

Model T6-600

1

HOLD

AUTO

SELECT

2

Use the Ground Probe

3

/ /

1

HOLD

AUTO

SELECT

2

Insert Test Probes

into the storage dock

3

Hold hand firmly on
FieldSense
Ground Contact

1

2A

2B

HOLD

Tips: FieldSense Technology

Use the black probe to make the ground connection if:

● wearing gloves or insulated footwear

● standing on an insulated ladder

● additional ground contact is required for the application

W Do not hold or touch wire during a measurement.

FieldSense measurement looks like this when properly grounded:

If you see: Solution:

● Display color turns green

● Display shows a valid measurement >16 V
rather than dashes or 0.0

● Y shows for measurement ≥30 V

● shows on the

display

● Display color is gray

● VAC measurement
does not show on
display

● Display color is gray

● VAC measurement
does not show on
display

● Make sure that your bare hand
is firmly touching the FieldSense
Ground Contact on the battery
door.

● Check that the black probe is
properly stored in the dock.

● Check the wire position in the

fork opening. See the section
about wire position.

● Measurement is <16 V

● Check the wire position in the
fork opening. See the section
about wire position.

HOLD

4

4

/

/

200 A

CAT 600 V

CAT

1000 V

HOLD

5

HOLD

Hz

=

Display turns
green for valid
measurement.
See Tips.

200 A

CAT 6 00 V

CAT

1000 V

200 A

CAT 600 V

CAT

1000 V

Display turns
green for valid
measurement.
See Tips.

5

CAT 6 00 V

CAT

200 A

1000 V

Hz

=

4

CAT 600 V

200 A

Display turns
green for valid
measurement.
See Tips.

5

CAT 600 V

200 A

=

4

CAT 600 V

200 A

CAT 1000 V

200

600 V

Display turns
green for valid
measurement.
See Tips.

5

CAT 600 V

200 A

HOLD

1

200 A

CAT 600 V

CAT

1000 V

Low Battery
Indicator

2

Do not
overtighten
screw

2 AA

=