Fluke T6 Quick Start Guide

HOLD

Quick Reference Guide

True

RMS

T6-600/T6-1000

Electrical Tester

with FieldSense Technology

» See

Go to www.󰘱uke.com to register your product and 󰘰nd more information, or

download this Quick Reference Guide in other languages.

Safety Information

Fork Opening 17.8 mm

CAT 600 V

200 A

CAT

1000 V

.

1

2

6

3

HOLD

4

5

AUTO

SELECT

T6-1000

ELECTRICAL TESTER

PN 4897598 September 2017 Rev. 4, 7/18

© 2017-2018 Fluke Corporation. All rights reserved.

Speci󰘰cations are subject to change without noti󰘰cation.

7

Overview

Wire Position

1

Wire must contact
the bottom of the

CAT 600 V

200 A

Finger Guard

2

Display

3

X Hazardous Voltage ≥30 V

4

Function Selection/On/O󰀨

5

6

FieldSense Ground Contact

7

Test Probes/Storage Dock

CAT

fork opening.

1000 V

Model T6-1000

1 Wire Only

For safe operation, hold the

Tester behind the 󰘰nger guard.

Model T6-600

Auto O󰀨

15 min

Symbols

W

»

WARNING. RISK OF DANGER. Test with fork and FieldSense ground contact.

Consult user documentation. Test with fork and ground probe.

Hazardous voltage ≥30 V. Test with probes.

Y

Battery full charge.

Battery low. Replace.

Back light

J

J

FieldSense Measurement: Fluke voltage/current

sensing technique.

Good earth ground connection.

No earth ground connection.

Specications

Function

FieldSense

Voltage ac true-rms

FieldSense

Current ac true-rms

FieldSense

frequency (Hz)

Voltage ac true-rms Yes 1000 V 600 V 1 V

Voltage dc Yes 1000 V 600 V 1 V ±(1 % + 2 counts)

Resistance

[1] Accuracy: ±( [ % of reading] + [number of least signi󰘰cant digits] ). Accuracy is speci󰘰ed for 1 year after calibration, at

18 °C to 28 °C (64 °F to 82 °F) with relative humidity to 90 %. AC measurements are accoupled, RMS responding.

[2] Add 3 % typical without an external ground connection. External ground connection required for user wearing insulated

gloves, standing on an insulated ladder, or otherwise insulated from earth ground.

[3] FieldSense is speci󰘰ed from 16 V to 100 % of range.

Fork opening 17.8 mm

Temperature

Operating

Storage

Altitude

Operating

Storage

Relative Humidity 0 % to 90 %, 5 °C to 30 °C (41 °F to 86 °F)

Battery Type and Life 2x AA (IEC LR6) 360 hr continuous, typical is 200 hr using the FieldSense function

Temperature coe󰘲cient 0.1 x (speci󰘰ed accuracy) / °C for <18°C or >28 °C (<64.4 °F or >82.4 °F)

Requires

Test Leads

No 1000 V 600 V 1 V

No 200.0 A 200.0 A 0.1 A

No 45 Hz to 66 Hz 1 Hz ±(1 % + 2 counts)

Yes 2000 Ω 2000 Ω 1 Ω

Yes 100.0 kΩ 0.1 kΩ

-10 °C to +50 °C (+14 °F to +122 °F)

-30 °C to +60 °C (-22 °F to +140 °F)

2000 m

10 000 m

0 % to 75 %, 30°C to 40 °C (86 °F to 104 °F)

0 % to 45 %, 40°C to 50 °C (104 °F to 122 °F)

Model T6-1000 Model T6-600

Range Range Resolution Accuracy

±(3 % + 3 counts)
45 Hz to 66 Hz

±(3 % + 3 counts)
45 Hz to 66 Hz

±(1.5 % + 2 counts)
45 Hz to 66 Hz

±(1 % + 2 counts)Yes 20.00 kΩ 0.01 kΩ

Replacement Parts

Test Lead Assembly (T5-RLS) Replace
only with Fluke double-insulated leads ()

TP1 Single Probe, Flat-Tip, Red PN 648128

TP1 Single Probe, Flat-Tip, Black PN 648102

TP38 Single Probe, Round-Tip, Red PN 1276841

TP38 Single Probe, Round-Tip, Black PN 1276852

Battery Door PN 4944370

Battery Door Screw PN 1618578

Use only specied replacement parts

.Lead Replacement

[1]

[2] [3]

[3]

Accessories● HT6 ●

● HT6 Belt Holster

● TPAK Hanger

● PRV240FS Proving Unit

● AC285 SureGrip™ Alligator Clips

● AC220 SureGrip™ Alligator Clips

● C60 softcase

Contact FlukeUSA:

USA: 1-800-44-FLUKE (1-800-443-5853)

Canada: 1-800-36-FLUKE (1-800-363-5853)

Europe: [phone]

Japan: [phone]

Singapore: [phone]

China: [phone]

Anywhere in the world: [phone]

PN 4462973

0

C

C

HOLD
HOLD

How to Make Measurements

1

2A

2B

/

HOLD

45 Hz - 66 Hz
T6-600 max: 600 V rms CAT III

(AC)

T6-1000 max: 1000 V rms CAT III
600 V rms CAT IV

45 Hz - 66 Hz
T6-600 max: 600 V CAT III

(DC)

T6-1000 max: 1000 V CAT III
600 V CAT IV

Model T6-1000

1

HOLD

2

Use the Ground Probe

3

Hz

// /

1

HOLD

Hz

2

Insert Test Probes
into the storage
dock

3

Hold hand 󰘰rmly on

FieldSense Ground
Contact

Hz

Model T6-600

1

HOLD

AUTO

SELECT

2

Use the Ground Probe

3

//

1

HOLD

AUTO
SELECT

2

Insert Test Probes
into the storage
dock

3

Hold hand rmly on

FieldSense Ground
Contact

1

2A

2B

HOLD

STips: FieldSense Technology

Use the black probe to make the ground connection if:

● wearing gloves or insulated footwear

● standing on an insulated ladder

● additional ground contact is required for the application

W Do not hold or touch wire under test during a measurement. This will modify

the operator's voltage pontential with respect to earth and give invalid
measurements.

FieldSense measurement looks like this when properly grounded:

● Display color turns green

● Display shows a valid measurement >16 V

rather than dashes or 0.0

● Y shows for measurement ≥30 V

If you see: Solution:

● Make sure that your bare hand

show on the

●

display

● Display color is gray

● VAC measurement

does not show on
display

● Display color is gray

● VAC measurement

does not show on
display

is 󰘰rmly touching the
FieldSense Ground Contact
on the battery door.

● Check that the black probe is
properly stored in the dock.

● Make sure the wire position in

the fork opening is correct. See
the

Overview

position.

● Measurement is <16 V

● Make sure the wire position in

the fork opening is correct. See
the

Overview

position.

section about wire

section about wire

HOLD

HOLD

4

4

/

/

200 A

CAT 600 V

CAT

1000 V

Display turns
green for valid
measurement.
See Tips.

5

CAT 600 V

CAT

200 A

1000 V

HOLD

Hz

=

200 A

CAT 600 V

CAT

1000 V

Display turns
green for valid
measurement.
See Tips.

5

CAT 600 V

CAT

200 A

1000 V

Hz

=

4

CAT 600 V

200 A

Display turns
green for valid
measurement.
See Tips.

5

CAT 600 V

200 A

=

4

CAT 600 V

200 A

20

600 V

Display turns
green for valid
measurement.
See Tips.

5

CAT 600 V

200 A

1000 V

HOLD

1

200 A

CAT 600 V

CAT

1000 V

Low Battery
Indicator

2

Do not
overtighten
screw

2 AA

=