FLUKE ScopeMeter 190C, ScopeMeter 190B, ScopeMeter 120 User Manual
ScopeMeter®190C/190B Series
and ScopeMeter
®
120 Series
Technical Data
ScopeMeter 190C and 190B
Series: Speed, performance
and analysis power
For demanding applications, the
ScopeMeter 190C and 190B Series
high-performance oscilloscopes
offer specifications usually found on
top-end bench instruments. With
up to 200 MHz bandwidth,
2.5 GS/s real time sampling and a
deep memory of 27,500 points per
input they’re ideal for engineers
who need the full capabilities of a
high-performance scope in a handheld, battery powered instrument.
•
Dual input - 200, 100 or
60 MHz bandwidth
•
Up to 2.5 GS/s real time
sampling per input
•
Connect-and-View™automatic
triggering, a full range of manual trigger modes plus external
triggering
•
Digital Persistence for analyzing
complex, dynamic signals like
on an analog oscilloscope (190C)
•
Fast display update rate for
seeing dynamic behavior
instantaneously
•
Automatic capture and replay of
100 screens
•
27,500 points and more per
input record length using
ScopeRecord™mode
•
TrendPlot™paperless recorder
for trend analysis up to 22 days
•
1,000 V CAT II and 600 V CAT
III safety certified
•
Waveform reference for visual
comparison and automatic
pass/fail testing (190C) of
waveforms
•
Up to 1,000 V independently
floating isolated inputs
•
Four hours rechargeable
NiMH battery pack
ScopeMeter 120 Series:
Three-in-one simplicity
The compact ScopeMeter 120 Series
is the rugged solution for industrial
troubleshooting and installation
applications. It’s a truly integrated
test tool, with oscilloscope, multimeter and “paperless” recorder in
one affordable, easy-to-use instrument. Find fast answers to problems
in machinery, instrumentation,
control and power systems.
•
A dual input 40 MHz or 20 MHz
digital oscilloscope
•
Two 5,000 counts true-rms
digital multimeters
•
Cursor measurements (Fluke 124)
•
A dual input TrendPlot recorder
•
Connect-and-View trigger
simplicity for hands-off operation
•
Shielded test leads for oscilloscope, resistance, continuity
and capacitance measurements
•
Full bandwidth, VPS40 10:1
40 MHz probe included standard
with Fluke 124
•
Up to seven hours battery
operation
•
600 V CAT III safety certified
•
Optically isolated RS-232
interface
•
Rugged, compact case
E
G
M
A
E
N
N
A
T
M
S
Y
T
I
L
A
U
Q
C
E
R
T
I
F
I
E
I
D
T
T
E
O
E
M
Y
S
T
E
M
1
0
0
9
O
S
R
2 Fluke Corporation ScopeMeter 190C/190B Series and ScopeMeter 120 Series
Fluke 199C Fluke 196C
Fluke 199B Fluke 196B Fluke 192B
Bandwidth 200 MHz 100 MHz 60 MHz
Rise time 1.7 ns 3.5 ns 5.8 ns
Bandwidth limiter: User selectable: 10 kHz, 20 MHz
or off
Number of inputs: 2 plus external trigger. All inputs
isolated from each other and ground.
Input coupling: AC or DC, with ground level indicator
Input sensitivity: 2 mV/div to 100 V/div (Fluke 190C
Series); 5 mV/div to 100 V/div (Fluke 190B Series)
Variable attenuator: Variable gain on input channel A
Input voltage: 1000 V CAT II, 600 V CAT III rated -
See “general specifications” for further details.
Vertical resolution: 8 bit
Accuracy: ±(1.5% of reading + 0.04 x range/div)
Input impedance: 1 MΩ ± 1% // 15 pF ± 2 pF
Connect-and-View
™
: Advanced automatic triggering
that recognizes signal patterns, automatically sets up
and continuously adjusts triggering, time base and
amplitude. Automatically displays stable waveforms of
complex and dynamic signals like motor drive and
control signals.
Video triggering: NTSC, PAL, PAL+, SECAM. Includes
field 1, field 2 and line select.
Pulse width triggering: Pulse width qualified by time.
Allows for triggering <t, >t, =t, ≠t, where t is selectable in minimal steps of 0.01 div. or 50 nsec.
Time delay: One full screen of pre-trigger view or up
to 100 screens (1200 divisions) of post-trigger delay
Automatic Capture of 100 Screens
The instrument ALWAYS memorizes last 100 screens
(no user interaction or setup required). When an
anomaly occurs on screen, the HOLD button can be
pressed to review the full screen sequence over
and over.
Instrument can be set up for triggering on glitches
or intermittent anomalies and will operate in
“baby-sit” mode and will capture 100 events.
Alternatively, the 199C and 196C can be set up in
waveform compare mode to store only matching
(“Pass”) or only non-matching (“Fail”) acquired waveforms in the replay memory bank for further analysis.
Replay: Manual or continuous replay. Displays the
captured 100 screens as a “live” animation. Each
screen is labelled with date and timestamp. The
contents can also be viewed by manually scrolling
backwards and forwards “screen by screen.”
Replay storage: Up to 2 sets of 100 screens each
can be saved for later recall and analysis
Waveform Compare and Pass/Fail Testing
Waveform compare: Provides storage and display of a
reference waveform for visual comparison with newly
acquired waveforms. Reference is derived from an
acquired waveform and can be modified in the
ScopeMeter or externally using FlukeView®Software.
Pass/Fail Testing (199C, 196C): In waveform compare
mode, the Color Scopemeter can be set up to store
only matching (“Pass”) or only non-matching (“Fail”)
acquired waveforms in the replay memory bank for
further analysis.
Automatic Scope Measurements
Vdc, Vac rms, Vac+dc, Vpeak max, Vpeak min, Vpeak to
peak, Aac, Adc, Aac+dc, frequency (Hz), risetime, falltime, power factor, Watts, VA, VA reactive, phase, pulse
width (pos/neg), dutycycle (pos/neg), temperature °C,
temperature °F, dBV, dBm into 50 Ω and 600 Ω
Vpwm ac, Vpwm ac+dc for measurement on pulse
width modulated motordrives and frequency inverters
Cursor Measurements
Source: Input A, input B or the Mathematical Result
trace
Dual horizontal lines: Voltage at cursor 1 and 2,
voltage between cursors
Dual vertical lines: Time between cursors, 1/T
between cursors (in Hz), voltage between markers,
risetime with markers, falltime with markers
Single vertical line: Min-Max and Average voltage
at cursor position
Zoom: Up to 8x horizontal zoom
Technical Specifications 190C and 190B Series
Oscilloscope Mode
Vertical Deflection
Display and Acquisition
Fluke 199C Fluke 196C
Fluke 199B Fluke 196B Fluke 192B
Maximum 2.5 GS/s 1 GS/s 500 MS/s
real-time
sample rate
Number of 2 2 2
digitizers
Time base 5 ns/div 10 ns/div
range to 5 s/div to 5 s/div
Horizontal
Fluke 199C Fluke 199B
Fluke 196C
Fluke 196B Fluke 192B
Display 144 mm (5.67˝) full 144 mm (5.67˝)
color LCD monochrome LCD
Display modes Input A, input B, dual, Input A, input B, dual,
average, invert, replay, average, invert,
Digital Persistence mode replay, persistence
(short/medium/ (on/off)
long/infinite)
Maximum record length: 1,200 points per input in
Scope mode; 27,500 points per input in
ScopeRecord™roll mode (5 ms/div to 2 min/div)
Accuracy: ±(0.01 % of reading + 1 pixel)
Glitch capture: 50 nsec (at 5 µsec/div to 1 min/div);
250 nsec (at 2 min/div)
Visible screen width: 12 divisions in scope mode
Waveform mathematics: A + B, A - B, A * B, all
with user selectable scaling of resultant; A versus B
(X - Y-mode)
Acquisition modes: Normal, auto, single shot,
ScopeRecord™roll, glitch capture, waveform
compare, waveform compare with automatic
“Pass / Fail testing” (in 199C and 196C only)
Trigger and Delay
Source: Input A, input B, external trigger input.
All input references isolated from each other and from
ground
Modes: Automatic Connect-and-View,™free run,
single shot, edge, delay, video, video line, selectable
pulsewidth
Recorder Mode
ScopeRecord-Roll Mode
Dual input waveform storage mode
Source and display: Input A, Input B, Dual
Memory depth: 27,500 points per input or more.
Each point consists of Min-Max pair
Min-Max values: Min-Max values are measured at
high sample rates ensuring capture and display of
glitches
Time base range 5 ms/div to 1 min/div 2 min/div
Recorded timespan 6 sec to 24 hr 48 hr
Glitch capture 50 ns 250 ns
Sample rate 20 MS/s 4 MS/s
Resolution 200 µsec to 2 sec 4.8 sec
Recording modes: Single sweep, continuous roll,
Start-on-Trigger, Stop-on-Trigger
Stop-on-Trigger (through external): ScopeRecord
mode can be stopped by an individual trigger event,
or by an interruption of a repetitive trigger signal
Horizontal scale: Time from start, time of day
Zoom: Up to 100x
Memory: Up to 2 dual input ScopeRecord waveforms
can be saved for later recall and analysis
TrendPlot™recording
Single or dual input electronic paperless chart
recorder. Plots, displays and stores meter and scope
measurements.
Source and display: Input A, Input B or DMM input
Memory depth: 18,000 points recording. Per record
point a minimum, a maximum and an average value,
plus a date and timestamp are recorded.
Ranges: 5 s/div to 30 min/div in normal view mode;
5 min/div to 48 hr/div in view all mode, giving
overview of total record
Recorded timespan: Up to 22 days with a resolution
of 1 minute
Recording mode: Continuous roll for the duration of
the full recordable timespan
Measurement speed: 5 measurements per second
Horizontal scale: Time from start, time of day
Zoom: Up to 64x zoom
Memory: Up to 2 TrendPlot recordings can be saved
for later recall and analysis
Cursor measurements - all recorder modes
Source: Input A, B or DMM input
Dual vertical lines: Min-Max or Average
voltage. Time between cursors
Single vertical line: Min-Max or Average
voltage. Absolute date and time or time from start
Meter Mode
Via 4 mm banana inputs. Fully isolated from scope
inputs and scope ground. The specified accuracy is
valid over the temperature range 18 °C to 28 °C
(65 °F to 82 °F). Add 10 % of specified accuracy for
each degree C below 18 °C or above 28 °C.
Maximum Resolution: 5,000 counts
Voltmeter Ranges: 500 mV, 5 V, 50 V, 500 V, 1,000 V
Accuracy:
Vdc ± (0.5 % + 5 counts)
Vac true rms
15 Hz...60 Hz: ± (1 % + 10 counts)
60 Hz...1 kHz: ± (2.5 % + 15 counts)
Vac+dc true rms
dc...60 Hz: ± (1 % + 10 counts)
60 Hz...1 kHz: ± (2.5 % + 15 counts)
Ohms:
Ranges: 500 Ω, 5 kΩ, 50 kΩ, 500 kΩ, 5 MΩ, 30 MΩ
Accuracy: ± (0.6 % + 5 counts)
Other Meter Functions
Continuity: Beeper on < 50 Ω (± 30 Ω)
Diode test: Up to 2.8 V
Amps: Adc, Aac, Aac+dc using an optional current
clamp or shunt
Scaling factors: 0.1 mV/A ... 100 V/A
Temperature (°C, °F): With optional accessories. Scale
factors 1 mV/°C or 1 mV/°F
Input impedance: 1 MΩ ± 1% // 10 pF ± 2 pF
Advanced meter functions: Auto/manual ranging,
relative measurements (Zero reference), TrendPlot
recording
ScopeMeter 190C/190B Series and ScopeMeter 120 Series Fluke Corporation 3
Loading...