Fluke Norma Star Specifications

Norma Star Point Adapter

 max. 500 V Phase to Phase

 High frequency range 100 kHz

 Compensated phase angle

 Basic uncertainty ± 0,2%

 Insulation 600V CAT III

 Safety input plugs

 Insulated safety output

connectors

Introduction

Norma Star Point Adapter generates a
virtual star point in 3-phase delta systems
without neutral for measuring purposes.

Applied Standards and
Regulations

Norma Star Point Adapter conforms to the European
Low Voltage Directive 2006/95/EC.

Norma Star Point Adapter is designed in accordance

with the harmonized standard

IEC 61010-1: Pollution Degree 2,

IEC 61010-2-030: 600 V CAT III

Safety of Measuring, Control and Laboratory

Equipment Part 1: General Requirements

Protection Class II according to IEC 61140

Pollution degree 2

Contacting Fluke

To contact Fluke, call one of the following
telephone numbers:

USA: 1-800-44-FLUKE (1-800-443-5853)
Canada: 1-800-36-FLUKE (1-800-363-5853)
Europe: [phone]
Japan: [phone]
Singapore: [phone]
Anywhere in the world: [phone]

USA Service: 1-888-99-FLUKE (1-888-993-5853)

Or, visit Fluke's Web site at www.fluke.com.
To register your product, visit register.fluke.com

Technical Data

Nominal Resistance between phases: 200kΩ // 260pF

Max. Voltage between phases: 500V

Basic Uncertainty: ± 0,2%

Uncertainty at 100kHz: ± 1%

Measurement Category: 600V CAT III / 300V CAT IV

Dimension: 195 x 125 x 57 mm

Weight: 445g

Protection: IP 40

Operating Temperature: –10 to +40°C

Storage Temperature: -10°C to +70°C
Altitude: ≤2000 m
Humidity: ≤40 C, 75 % rh; ≤40 C, 95 % rh; ≤ 10