Fluke Norma 6000 Specifications

TECHNICAL DATA

Fluke Norma 6000 Series
Portable Power Analyzers

Accurate enough for the lab, built for the field

The Fluke Norma 6000 Series Portable Wideband Precision Power
Analyzers give you more freedom than ever before to make high
accuracy power measurements wherever you need to—whether
in the lab, or in the field. Designed for portability the lightweight,
battery powered Fluke 6000 Series eliminates the need to carry
large, fragile, expensive analyzers into the field, allowing you to
make measurements directly at the load in nearly any environ­ment. By measuring directly at the load, you can discover how the
equipment operates under real-world conditions, with real-world
variables, not just at a test bench or in the lab.

The Fluke 6003 includes three measurement channels which
each consist of a voltage and current input making it ideal for
three-phase power measurements. The Fluke 6004 includes four
measurement channels giving it the capability to measure three­phase power and DC power simultaneously to enable real-time
inverter efficiency measurements under real-world conditions.
The Fluke 6003+ and 6004+ models both add the capability to
measure mechanical parameters such as speed and torque (from
separate transducers) to discover the electrical to mechanical
efficiency of the load under a variety of typical operating modes.
With the addition of optional measurement accessories, you can
even make measurements up to 1,500V DC and 2,000A AC+DC on
conductors with a diameter of up to 52mm.

KEY MEASUREMENTS

Voltage, Current, Active Power, Reactive Power,
Apparent Power, Power Factor and Harmonics with
associated values

HIGH ACCURACY AND WIDE
BANDWIDTH

0.1 % measurement accuracy and 500kHz
bandwidth

HIGHLY PORTABLE

Battery powered, weighs 3.5kg, operates for up to
10 hours without a power cord

The instrument’s compact, battery-powered design combined
with a wideband frequency response makes it easier than ever to
make measurements on hard to access systems such as inverter
drive systems, DC-AC and AC-DC power conversion systems and
electric motors without removing them from service. Making these
measurements in the field simplifies the troubleshooting and per­formance measurement processes without sacrificing uptime, giving
you more accurate test results that will enable you to discover
whether your loads are operating as effectively and efficiently as
they should be.

• Highly portable and easily installed in tight spaces—only 9.6 cm
thick.

• Operate continuously for up to 10 hours without an external
power supply using the 5000mAh Li-ion Internal Battery.

• Measure safely—safety rated for CAT III 1000V, CAT IV 600V
environments.

• Measure three phase power and DC output power at the same
time with 3 or 4 channel models, with voltage and current inputs
on each channel.

• Make mechanical torque and speed measurements using the
included inputs and outputs of the Fluke 6003+ and 6004+.

• 0.1% accuracy, 500kHz bandwidth, 200ks/s sample rate so you
can rely on the power conversion system measurements you take
no matter what distortion may be present.

• USB and RS485 interface and open communication protocol for
easy system integration and software platform flexibility.

• Combine two analyzers to enable simultaneous measurement of
multiple circuits for even more troubleshooting capability—con­figurable to 6 or 8 channels using dual analyzer synchronization.

• View critical data in the field on the main display—Meter, Wave-
form, Harmonics up to the 100th, Vector and Trend.

• Ensure high common-mode rejection and allow flexible
configurations according to measurement requirements using the
electrically isolated channels.

• User adjustable measurement rate from 100ms to 1s with con-
tinuous logging via 32GB of onboard storage.

• Easy in-field set up using the integrated front panel or a remote
PC connection (USB or RS485).

• Online measuring, data download and analysis with included PC
software (Fluke Power Analyzer Software).

• Full remote control of the connected instrument using Fluke
Power Analyzer Software and a local USB or long-distance
RS485 connection.

Specifications

Inputs Norma 6003 3 Voltage + 3 Current

Norma 6003+ 3 Voltage + 3 Current + 1 Motor

Norma 6004 4 Voltage + 4 Current

Norma 6004+ 4 Voltage + 4 Current + 1 Motor

Sample rate

Measurement update rate

Dimensions (H * W * L)

Weight

Display

Operating temperature

Storage temperature

Operating humidity Non-condensing (< 10 °C )

Operating altitude

Storage altitude

Ingress protection

Battery BP 291, 10.8V/5000mAh, 54Wh IEC 62133, UN38.3

Safety IEC 61010-1: Pollution Degree 2

EMC

Warranty

200ks/s

100ms, 200ms, 500ms, 1s

298mm x 215m x 96mm

3.5 kg (7.7 lbs)

5.7 inch, TFT LCD, 640x480

-10 °C to +50 °C

-30 °C to +60 °C

≤ 90 % RH (at 10 °C to 30 °C)
≤ 75 % RH (at 30 °C to 40 °C)
≤ 45 % RH (at 40 °C to 50 °C)

2000m

12000m

IP 50 (Terminals mated) according to IEC 60529:

Operating time: 10 Hours (on batter y)

IEC 61010-2-030: CAT IV 600V, CAT III 1000 V

IEC 61326-1: Industrial
IEC 61326-2-2

1 Year

2 Fluke Corporation Fluke Norma 6000 Series Portable Power Analyzers

Communication Interface

Dual Analyzer Synchronization Mode

PC Software

Storage Capacity

Data trend storage rate

Main Function

Measuring Parameters RMS, DC Component, AC Component, Rectified Mean, Peak Value, Peak-Peak, Crest Factor,

USB/RS485

Able to extend to 6, 7 or 8 channels (using multiple instruments)

Fluke Power Analyzer software

32GB

As per display rate

Meter, Scope, Harmonic, Phasor, Trend

Form Factor, Fundamental Component, Fundamental Content, Harmonic Distortion, Harmonic
Content, Harmonic Factor for voltages and currents, Active Power, Reactive Power, Apparent
Power, Power Factor, Phase Shift, Efficiency, Impedance, Electric Energy, Charge/Discharge
capacity (Ah), Frequency, Motor Speed, Torque, Mechanical Power, Mechanical Energy, Sum­mation function

Electrical specifications

Voltage

Range 10 V, 100 V, 1000 V

Crest Factor CF ≤ 2

Maximum Voltage 10 % overload

Input Impedance 2M Ω/10pF (Typical)

Temperature Coefficient 0.05 * (Spec)/k

Bandwidth 1000V range: 500kHz; 100V range: 200 kHz;

CMRR

10V ra nge:100 kHz

120 dB @ 50/60 Hz

Accuracy (% reading + % range)

Range 1000 V 100 V 10 V

DC 0.1 + 0.1 0.1 + 0.1 0.1 + 0.2

AC (10Hz to 1kHz) 0.1 + 0.1 0.1 + 0.1 0.1 + 0.2

AC (10k H z ) 5 + 0.5 5 + 0.5 5 + 0.5

Current

Crest Factor CF ≤ 2

Temperature Coefficient 0.05 x (Spec)/k

Overload capacity 10 % overload

CMRR 120 dB @ 50/60 Hz

Shunt (current input)

Measuring Range 0.1 A, 1 A, 10 A

Input Impedance 0.025 Ω (Typical)

Bandwidth 10 A range: 500 kHz; 1 A range: 200 kHz; 0.1 A range: 100 kHz

BNC (voltage input)

Range 0.1 V, 1 V, 10 V

Input Impedance 100k Ω/100pF (Typical)

Bandwidth 10 V range: 500 kHz; 1 V range: 200 kHz; 0.1 V range: 100 kHz

3 Fluke Corporation Fluke Norma 6000 Series Portable Power Analyzers

Accuracy (% reading + % range)

Range 10 A 1 A 0.1 A 10 V 1 V 0.1 V

DC 0.1 + 0.2 0.1 + 0.5 0.1+2 0.1+0 .1 0.1+0.2 0.1+1

AC (10Hz to 1kHz) 0.1+0 .1 0.1+0.2 0.1+1 0.1+0.1 0.1+0.1 0.1+0.5

AC (10k H z ) 5+1 5+1 5+1 5+1 5+1 5+1

Motor Module (Torque and Speed)

Voltage Range ± 10 V dc, 10 % overload

Voltage Channels 2

Input Impedance 1.1M Ω (Typical)

Accuracy at dc 0.1 % range + 0.1 % reading

Pulse Channels 3

Pulse Logic High Threshold

Pulse Logic Low Threshold

Maximum Pulse Frequency

2 V (Typical)

0.8 V (Typical)

100 k Hz

Frequency Domain Measurement

Frequency Accuracy

Harmonics

Calculation method

0.05 % range + 0.05 % reading

100 (50Hz/60Hz)

FFT/Interpolation

Optional Accessory: Fluke U1500s High Voltage Differential Probe

Product Feature

The Fluke U1500s High Voltage Differential Probe is a portable voltage sensor with a 1500 V range and 0.1 % accuracy.

General Specifications

Modules

Maximum Voltage

Dimensions

Weight

Input terminal

4 Fluke Corporation Fluke Norma 6000 Series Portable Power Analyzers

U1500s

1000 V ac rms, continuous, 1500 V dc (Single-range)

138 mm x 75 mm x 45 mm

295 g, battery included

4 mm banana jacks

Output terminal

Accessory Cable

Ingress Protection

Battery Type

Battery Life

Indicator Low battery flashes red

Operating Temperature

Storage Temperature

Operating Humidity Non-condensing (<10 °C)

Operating Altitude

Storage Altitude

Safety General

Safety Measurement

BNC (female)

BNC to Banana, 1.6 m

IEC 60529: IP40 (Terminals Mated)

4 AA, IEC LR6

168 hours (typical)

Working flashes green

-10 °C to 50 °C

-30 °C to 60 °C

≤ 90 % RH (at 10 °C to 30 °C)
≤ 75 % RH (at 30 °C to 40 °C)
≤ 45 % RH (at 40 °C to 50 °C)

2000 m

12 000 m

IEC 61010-1: Pollution Degree 2

IEC 61010-2-030: CAT III 1000 V, CAT IV 600 V, DC 1500 V

Electrical Specifications

Measurement Range 1000 V ac rms, 1500 V dc

Accuracy 0.1 % of reading +0.1 % of Range

Bandwidth 100 kHz (Max)

Input Impedance 10 MΩ / <10 pF

Scale 4 mV/ V

Common Mode Rejection Ratio 60 dB at 50 Hz

Temperature Coefficients 0.05 % / °C (<18 °C or >28 °C)

Over-range Protection 10 % over range

5 Fluke Corporation Fluke Norma 6000 Series Portable Power Analyzers

Optional Accessory: Fluke 80i-2010s AC/DC Current Clamp

Product Feature

The Fluke 80i-2010s AC/DC Current Clamp is a clamp-on current probe with 2000A range and 0.8 % accuracy.

General Specifications

Modules

Dimensions

Weight

Output Cable

Maximum Conductor Size

Maximum Jaw Opening

Output to Zero

Temperature Operating

Storage (battery removed)

Operating Humidity

Altitude Operating

Storage

Demagnetize Clamp Open and close the Clamp jaws several times with soft click, use of the clamp on

Safety

Ingress Protection

Power Supply Type

Battery Life

Low battery indicator

80 i -2010s

110 mm x 270 mm x 46mm

0.710 kg (1.6 lbs), including battery

1.5 m (60 in) Shielded Coaxial cable with BNC plug

52.0 mm (2.05 in)

81.5 mm

Auto adjustment with Zero button

-10 °C to 50 °C (14 °F to 122 °F)

-30 °C to +60 °C (-22 °F to +140 °F)

≤ 90 % RH (at 10 °C to 30 °C) ≤ 75 % RH (at 30 °C to 40 °C) ≤ 45 % RH (at 40 °C to 50 °C)

2,000 m (6560 ft)

12,000 m (40,000 ft)

uninsulated conductors is limited to 1000 Vac rms or DC and frequencies 1 kHz or less.

IEC 61010-1, Pollution Degree 2, IEC 61010-2-032: CAT III 1000 V /CAT IV 600 V

IEC 60529, IP40

2 x AA alkaline battery, IEC LR6

150 hours (typically)

Yes

6 Fluke Corporation Fluke Norma 6000 Series Portable Power Analyzers

Electrical Specifications

Current Range 2000 A ac rms, ± 2000 A dc

Output Sensitivity 1 mV/A

Accuracy ± 0.8 % of reading ± 0.2 % of range

Bandwidth for Accuracy Specification DC to 400 Hz

Load impedance >1 MΩ and <10 pF

Frequency Response (small signal) DC to 20 kHz (-3 dB)

Temperature Coefficient 0.1 x specified accuracy for each degree C above 28 °C or below 18 °C

Working Voltage 1000 V AC RMS or DC

Ordering information

Fluke-Norma 6003 Portable power analyzer with 3 voltage

inputs and 3 current inputs

Fluke-Norma 6003+ Portable power analyzer with 3 voltage

inputs, 3 current inputs, and 1 motor input

Fluke-Norma 6004 Portable power analyzer with 4 voltage

inputs and 4 current inputs

Fluke-Norma 6004+ Portable power analyzer with 4 voltage

inputs, 4 current inputs, and 1 motor input

Optional accessories

Flu ke U1500S High Voltage Differential Probe

Fluke 80i-2010S 2,000 A AC/DC Current Clamp

Fluke 80i-2010S/3PK 2,000 A AC/DC Current Clamp 3 pack

Fluke. Keeping your world
up and running.

Fluke Corporation
PO Box 9090, Everett, WA 98206 U.S.A.

Fluke Europe B.V.
PO Box 1186, 5602 BD
Eindhoven, The Netherlands

For more information call:
In the U.S.A. [phone] or
Fax [phone]
In Europe/M-East/Africa [phone] or
Fax [phone]
In Canada (800)-36-FLUKE or
Fax [phone]
From other countries [phone] or
Fax [phone]
Web access: http://www.fluke.com

©2019 Fluke Corporation.
Specifications subject to change without notice.
Printed in U.S.A. 12/2019 6013111a-en

Modification of this document is not permitted
without written permission from Fluke Corporation.

®

7 Fluke Corporation Fluke Norma 6000 Series Portable Power Analyzers