Fluke ClirVu Specifications

CV Series

ClirVu® Infrared

Windows

Compliance without compromise. Safety without sacrifice.

Increase the safety and speed of electrical thermal imaging inspections with the new Fluke ClirVu arc-flash and electrocution, increase the safety of your personnel and reduce the time and cost of preventive maintenance.

•Nomoreremovingthepaneldoorfor

installation

•WorkpermitrequirementsandNFPA70E

processes are significantly reduced

•FullPPEisoftennotrequiredsoinspections

are done faster and more comfortable

• Superior arc blast protection: – High temperature silicon gaskets – Mounting and door latches provide high pressure

gasket compression

– Die cast components are manufactured with the

highest strength alloys

– Jam nut screws are made from 4037 steel, heat

treated to 160,000 psi tensile

• Torture Tested to the highest test ratings – IEEE C37.20.7 63 kA Arc tested at KEMA, UL

50/50E/50V, UL1558, IEC60529-1: IP67, IEC 60068, NEMA 4/12, CSA C22.2 NO. 14-13:2012, and CE

• Quick and easy installation – Installation takes 5 minutes with one technician – Only one hole necessary with standard Greenlee

punch. Rear access required for punch connection only (Easily accomplished with one technician)

– Installs from front; no template needed; no rear

access required

– Grounds instantly to metal enclosure with patent

pending AutoGround

– Sharp teeth on jam nuts assure four gas-tight

ground connections

– All components have electrically conductive

finishes for optimum grounding

IR Windows. Reduce the risk of

™

process

• Quarter turn latch easily opens hinged cover

• Corrosion and UV resistance for challenging outdoor

• Three sizes 50 mm, 75 mm and 95 mm (2 in , 3 in

Technical Data

environments

and 4 in) with the option of hand turn or security key door latches

Specications

Model

Size 95 mm (4 in) 75 mm (3 in) 50 mm (2 in)

Voltage range Any

NEMA environment type Type 4/12 (indoor/outdoor)

AutoGround

ClirVu

Operating temperature -40 °C to +232 °C (-40 ° F to +450 °F) and +260 °C (500 °F) Intermittent

Compatible with all Fluke cameras Yes

Jam nut locking system Yes

Cover and fastener permanently attached Yes

Single-hole install Yes

Hand turn and security key door latch options Yes

Visual inspection and fusion capable Yes

Short/Mid/Long-wave IR and UV capable

Ratings and testing

Arc-tested (IEEE C37.20.7) 63 kA for 30 cycles @ 60 Hz at KEMA UL 50V component recognition

UL 50 /NEMA environmental rating

UL1558 Yes

CSA C22.2 No. Yes

CSA type rating Type 4

IP rating IP67 at TUV

Lloyds register Up to 11 kV marine switchgear, indoor or outdoor (offshore only)

Vibration rating IEC60068-2-6 at TUV

Humidity rating IEC60068-2-3 at TUV Install

Actual mounting hole diameter required 115.42 mm (4.544 in) 89.89 mm (3.539 in) 61.37 mm (2.416 in)

Greenlee

Recommended max panel thickness 10 gage

Overall window height 189.3 mm (7.45 in) 141.5 mm (5.57 in) 112.9 mm (4.45 in)

Overall window width 147.1 mm (5.79 in) 111.5 mm (4.39 in) 83.0 mm (3.27 in)

Overall window thickness 23.0 mm (0.90 in) 16.2 mm (0.64 in) 16.2 mm (0.64 in)

Door latch Hand Turn Security Key Hand Turn Security Key Hand Turn Security Key Optics

Optic insert diameter 95 mm (3.74 in) 75 mm (2.96 in) 50 mm (1.97 in)

Viewing aperture diameter 87.63 mm (3.450 in) 67.95 mm (2.675 in) 42.93 mm (1.690 in)

Viewing aperture area 6032 sq.mm (9.35 sq.in) 3626 sq.mm (5.62 sq. in) 1445 sq.mm (2.24 sq. in)

Thickness 4 mm (0.16 in) 2 mm (0.08 in) Other

Warranty Lifetime replacement against manufacturing defects

™

® optic

® punch kit = punch/die 742BB = 2984AV/2983AV 739BB = 1431AV/1432AV 76BB = 441AV/442AV

CV400 CV401 CV300 CV301 CV200 CV201

Yes

NEMA Type 4/12

Quick and easy install – 5 minutes, a standard hole punch and a torque wrench is all you need.

2 Fluke Corporation CV Series ClirVu® Infrared Windows

+ 1 hidden pages