Fluke 9103, 9140 Specifications
Field dry-wells and furnaces
Fluke Calibration dry-wells interface
directly to the Fluke 754 for fully
automated calibration.
Fluke Calibration 9103, 9140 and 9141 Field Dry-Wells
and 9150 Thermocouple Furnace
Temperature sensor test and calibration
• Lightweight and very portable
• Accuracy to ±0.25 °C
• RS-232 and Interface-it software included
• Interchangeable inserts
• 9103 goes as low as –25 °C.
Ordering information
9103 Dry-Well, –25 °C to 140 °C
9140 Dry-Well, 35 °C to 350 °C
10
10
9141 Dry-Well, 50 °C to 650 °C
9150 Thermocouple Furnace, 150 °C to 1200 °C
9316 Rugged Carrying Case for 9103
9308 Rugged Carrying Case for 9140
9309 Rugged Carrying Case for 9141
9315 Rugged Carrying Case for 9150
2514 Dry-Well Interface Cable to Fluke 744
Insert (interchangeable). Specify “A”, “B”, “C”, “D”
• 9140 is 6 pounds (2.7 kg) and 9141 is 3.6 kg (8 pounds)
• 9140 and 9141 reach max temp in
12 minutes
• 9150 extends up to 1200 °C covering a wide range of T/C types.
• Direct interface to Fluke 754
Recommended accessories: carrying case, additional inserts, reference
temperature sensor and indicator
Each dry-well includes one of four
available well inserts, an optional carrying case, RS-232 interface, instrument
control software and a NIST-traceable calibration.
9103, 9140, 9141 and 9150 Insert Options
Insert “A” Insert “B” Insert “C” Insert “D”
1/16 in
(1.6 mm)
1/2 in
(12.7 mm)
1/8 in
(3.2 mm)
1/4 in
(6.35 mm)
3/8 in
(9.5 mm)
3/16 in
(4.8 mm)
3/16 in
(4.8 mm)
3/8 in
(9.5 mm)
1/4 in
(6.35 mm)
1/4 in
(6.35 mm)
3/8 in
(9.5 mm)
3/16 in
(4.8 mm)
1/4 in
(6.35 mm)
6 mm
3 mm
4 mm
4 mm
6 mm
3 mm
Loading...