Fluke 30/32 Clamp Meters
Product Home | Features | Specifications |
Models, Options & Accessories | Manuals
Rugged, reliable
general purpose
clamp meters
The Fluke Model 30 and 32 Clamp
Meters are rugged, self-contained,
general purpose clamp meters that
measure up to your toughest
standards. Use them for
troubleshooting industrial,
commercial, hospital and residential
electrical and HVAC systems.
Measure not just ac current, but ac
volts, ohms and continuity as well.
Tapered jaws allow easy access in
crowded junction boxes.
Designed for durability, the Fluke 30
and 32 can stand up to tough job
site abuse. Drop them from a 6 foot
(2 meter) ladder, and they'll still deliver reliable measurements. Built-in
overload protection is provided to 600A continuous/600V, meeting UL and
TUV certification standards, and both meters have been tested to meet the
IEC 61010-1 Cat III 600V safety standard.
If you test circuits with non-linear loads such as computers or adjustable
speed drives, you need a True-rms meter. The Model 32 measures true-rms
ac current to 400A with a crest factor of 3, and 600A with a crest factor of 2.
© 1995 - 2000 Fluke Corporation
Privacy Statement
Fluke 30/32 Clamp Meters
Features
Product Home | Features | Specifications |
Models, Options & Accessories | Manuals
The Fluke 30 and 32 combine
the right features at an
affordable price
AC current measurement●
AC Voltage measurement●
True-rms measurement of ac Volts (32
only)
●
Resistance●
Continuity beeper●
Jaws accept one 750 MCM cable or two
350 MCM cables, up to 38 mm (1.5") in
diameter
●
Easy single-handed operation●
Display Hold captures readings in difficult
to reach areas for later viewing
●
Easy-view 2000 count digital display●
Protective soft carrying case and Fluke
Hard PointT TL75 test leads included
●
CAT III 600V●
Independently tested and approved for UL
3111, CSA 22.2 1010.1 1992 and TUV to
EN61010-1:1993
●
© 1995 - 2000 Fluke Corporation
Privacy Statement
Loading...