Fluke 289 Data Sheet
Fluke 289
True-rms Industrial Logging
Multimeter with TrendCapture
Now compatible with Fluke
Connect™ Mobile App
The new 289 is the next generation high
performance industrial logging multimeter designed to solve complex problems in
electronics, plant automation, power distribution, and electro-mechanical equipment.
With the ability to log data and review it
graphically on-screen, you can solve problems faster and help minimize downtime.
Let the new 289 be your watchdog for systems or processes while you are off solving
other problems.
TrendCapture displays VAC logged data.
Technical Data
Equipped with new functionality
• New – For wireless connectivity to
smart devices, the 280 Series is compatible with the Fluke ir3000 FC
Infrared Connector allowing you to
share live measurements on your iOS or
Android
mobile app
™
device with the Fluke Connect
• Requires Fluke ir3000 FC Infrared Con-
nector for Fluke Connect communication
• TrendCapture graphically displays
logged data session to quickly determine
whether anomalies may have occurred
• Zoom on trend provides unprecedented
ability to view and analyze TrendCapture
data; zoom in up to 14 times
• Selectable ac filter (Smoothing mode)
helps display a steadier reading when
the input signal is changing rapidly or
noisy
• Adjustable recording and auto hold
thresholds, specify a percentage change
in the readings that begins a new event
• Large 50,000 count, 1/4 VGA dot matrix
display with white backlight
• Logging function with expanded memory
for unattended monitoring of signals over
Built with
See it. Save it. Share it.
All the facts, right in the field.
Fluke Connect with ShareLive™ video call is the only wireless
measurement system that lets you stay in contact with your entire
team without leaving the field. The Fluke Connect mobile app
is available for Android
works with over 20 different Fluke productsthe largest suite of
connected test tools in the world. And more are on the way. Go to
the Fluke website to find out more.
Make the best decisions faster than ever before by viewing all
temperature, mechanical, electrical and vibration measurements
for each equipment asset in one place. Get started saving time and
increasing your productivity.
Download the app at:
™
(4.3 and up) and iOS (4s and later) and
Smart phone not included with purchase.
time. Using on-board TrendCapture users can
graphically review logged readings without
needing a PC. Store up to 15,000 recorded
events.
• Save multiple logging sessions before pc down-
load is necessary
• Two terminal 50 ohm range with 1 milliohm
resolution, 10 mA source current. Useful for
measuring and comparing differences in motor
winding resistance or contact resistance.
• Low Pass filter for accurate voltage and fre-
quency measurements at the same time on
adjustable speed motor drives and other electrically noisy equipment
• LoZ Volts. Low impedance voltage function for
eliminating ghost voltages. Also recommended
when testing for absence or presence of live
power.
• button. On board help screens for measure-
ment functions. Unsure about a function—go to
that function and press the “i” button.
• Real time clock for automatic time stamping of
saved readings
• Relative mode to remove test lead resistance
from low ohms or capacitance measurements
• True-rms ac voltage and current for accurate
measurements on non linear signals
• Measure up to 10 A (20 A for 30 seconds)
• 100 mF capacitance range
• Peak capture to record transients as fast as
250 µs
• Premium test leads and alligator clips included
• Amp jack plugs included
• Optional magnetic hanger for easy setup and
viewing while freeing your hands for other
tasks
• Optional FlukeView forms enables you to docu-
ment, store and analyze individual readings or
a series of measurements, then convert them
into professional-looking documents
• Limited lifetime warranty
Additional functions/features Fluke 289
Multiple on screen displays Yes
True-rms ac bandwidth 100 k H z
dBV/dBm Yes
DC mV resolution 1 µV
Megohm range up to 500 MΩ
Conductance 50.00 nS
Continuity beeper Yes
Battery/fuse access Battery/f use
Elapse time clock Yes
Time of day clock Yes
Min-max-avg Yes
Duty cycle
Pulse width
Isolated optical interface Yes
Auto/touch hold Yes
Reading memory Yes
Log to PC Yes
Interval/event logging Yes
Logging memory up to 15,000 readings
Yes
Yes
Specifications
Function Range and Resolution Basic Accuracy
DC volts
AC volts
DC current
AC current
Temperature
(excluding probe)
Resistance 500.00 Ω, 5.0000 kΩ, 50.000 kΩ, 500.00 kΩ,5.0000 MΩ, 50.00 MΩ, 500.0 MΩ 0.05 %
Capacitance 1.000 nF,10.00 nF 100.0 nF, 1.000 µF, 10.00 µF, 100.0 µF, 1000 µF, 10.00 mF,
Frequency 99.999 Hz, 999.99 Hz, 9.9999 kHz, 99.999 kHz, 999.99 kHz 0.005 %
Connectivity Optional infrared connector via Fluke ir3000 FC
2 Fluke Corporation 289 True-rms Industrial Logging Multimeter with TrendCapture
50.000 mV, 500.00 mV, 5.0000 V, 50.000 V,
500.00 V, 1000.0 V
500.00 µA, 5000.0 µA, 50.000 mA, 400.00 mA,
5.0000 A, 10.000 A
-200.0 °C to 1350.0 °C (-328.0 °F to 2462.0 °F) 1.0 %
100 m F
0.025 %
0.4 % (true-rms)
0.05 %
0.6 % (true-rms)
1.0 %
Loading...