Page 1
177x
LTE Module
Instructions
Introduction
The 177X LTE module provides global LTE (4G)
communications and allows connections to Fluke 177X
products located remotely. The module requires a SIM card
and contract with a service provider that has coverage where
the instrument and module are located.
With this module you can wirelessly communicate from a
computer to the instrument. Communication can be through
a VNC (Virtual Network Connection) or through the Fluke
Energy Analyze Plus application package. With this remote
connection you do not have to frequently visit the site
location to observe how a site survey is progressing. All the
measured and logged data is available through the remote
connection.
Contact Fluke
Fluke Corporation operates worldwide. For local contact
information, go to our website: www.fluke.com
To register your product, or to view, print, or download the
latest manual or manual supplement, go to our website.
.
+1-425-446-5500 fluke-info@fluke.com
PN 5280674 (English)
5/2023
©2023 Fluke Corporation. All rights reserved. Specifications are
subject to change without notice. All Product names are
trademarks of their respective companies.
Page 2
Safety Information
A Warni ng identifies hazardous conditions and procedures
that are dangerous to the user. A Caution identifies
conditions and procedures that can cause damage to the
Product or the equipment under test.
XW Warning
To prevent possible electrical shock, fire, or
personal injury:
Read all safety information before you use the
Product.
Do not alter the Product and use only as
specified, or the protection supplied by the
Product can be compromised.
Carefully read all instructions.
Do not use the Product if it operates incorrectly.
Do not work alone.
Use only specified replacement parts.
Have an approved technician repair the Product.
Disable the Product if it is damaged.
Do not exceed the Measurement Category (CAT)
rating of the lowest-rated individual component
of a Product, probe, or accessory.
Symbols
The table below lists the symbols that can be used on the
Product or in this document.
Symbol Description
»
W
X
~
2
Consult user documentation.
WARNING. RISK OF DANGER.
WARNING. HAZARDOUS VOLTAGE. Risk of
electric shock.
This product complies with the WEEE Directive
marking requirements. The affixed label
indicates that you must not discard this
electrical/electronic product in domestic
household waste. Do not dispose of this
product as unsorted municipal waste.
Page 3
Instructions
PN 5263915
Module Installation
1
3
2
4
Antenna Attachment
External Antenna with Cable
XW Warning
To prevent possible electrical shock, fire, or
personal injury, use Product approved measurement
category (CAT) antenna cables when the Product is
installed in environment where wires or exposed
metal parts provide access to hazardous live
voltage, such as, in cabinets.
3
Page 4
Note
The external antenna is not sold by Fluke. The
antenna cable connects to the antenna with a SMA
connector that has an outside thread and a center
receptacle (SMA female/jack). Former FCC
regulations required that WiFi equipment must use
reverse polarity connectors. You must use an SMA
male plug to RP-SMA female adapter if the antenna
uses a RP-SMA male connector with an internal
thread and center receptacle.
177x Antenna
1
2
Specifications
Size ................................................72.3 mm x 45.6 mm x 28.5 mm
Wei ght ..........................................35 g
Storage Temperature.............-20 °C to 60 °C
Note
Complete specifications are at www.fluke.com
the 1773/1775/1777 Product Specifications.
Safety ...........................................IEC 61010-1: Pollution
Degree 2
Electromagnetic Compatibility (EMC)
International ..........................IEC 61326-1: Basic
Electromagnetic Environment,
CISPR 11: Group 1, Class A
Group 1: Equipment has intentionally generated
and/or uses conductively-coupled radio frequency
energy that is necessary for the internal function of
the equipment itself.
. See
4
Page 5
Class A: Equipment is suitable for use in all
establishments other than domestic and those
directly connected to a low-voltage power supply
network that supplies buildings used for domestic
purposes. There may be potential difficulties in
ensuring electromagnetic compatibility in other
environments due to conducted and radiated
disturbances.
Caution: This equipment is not intended for use in
residential environments and may not provide
adequate protection to radio reception in such
environments.
Korea (KCC)............................Class A Equipment (Industrial
Broadcasting &
Communication Equipment)
Class A: Equipment meets requirements for
industrial electromagnetic wave equipment and the
seller or user should take notice of it. This
equipment is intended for use in business
environments and not to be used in homes.
USA (FCC)...............................47 CFR 15 subpart B. This
product is considered an
exempt device per
clause 15.103.
4G/LTE Specification
LTE category...............................LTE Cat 4 (max. 150 Mbit/s
downlink, 50 Mbit/s uplink)
Frequency bands.......................LTE-FDD: 1, 2, 3, 4, 5, 7, 8, 12,
13, 14, 18, 19, 20, 25, 26, 28, 66,
71
LTE-TDD..................................38, 39, 40, 41
WCSDMA................................1, 2, 4, 5, 6, 8, 19 (617 MHz to
2690 MHz)
SIM card slot ...............................Mini-SIM (2FF)
Regulatory/Carrier
certifications............................... > Radio Certifications on
i
the 177x Product
SIMPLIFIED EU DECLARATION OF CONFORMITY
Hereby, Fluke declares that the radio equipment contained in
this Product is in compliance with Directive 2014/53/EU. The
full text of the EU declaration is available at the following
internet address: www.fluke.com/RED
5
Page 6
LIMITED WARRANTY
This Fluke product will be free from defects in material and
workmanship for 2 years from the date of purchase. This
warranty does not cover fuses, disposable batteries, or
damage from accident, neglect, misuse, alteration,
contamination, or abnormal conditions of operation or
handling. Resellers are not authorized to extend any other
warranty on Fluke’s behalf. To obtain service during the
warranty period, contact your nearest Fluke authorized
service center to obtain return authorization information,
then send the product to that Service Center with a
description of the problem.
THIS WARRANTY IS YOUR ONLY REMEDY. NO OTHER
WARRANTIES, SUCH AS FITNESS FOR A PARTICULAR
PURPOSE, ARE EXPRESSED OR IMPLIED. FLUKE IS NOT
LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR
CONSEQUENTIAL DAMAGES OR LOSSES, ARISING FROM
ANY CAUSE OR THEORY. Since some states or countries do
not allow the exclusion or limitation of an implied warranty or
of incidental or consequential damages, this limitation of
liability may not apply to you.
Fluke Corporation
P.O. Box 9090
Everett WA 98206-9090
U.S.A.
Fluke Europe B.V.
P.O. Box 1186
5602 BD Eindhoven
The Netherlands
11/99
6
Loading...