Fluke 154 Operating Manual

HART® Calibration

Assistant

154

Users Manual

LIMITED WARRANTY AND LIMITATION OF LIABILITY

Each Fluke product is warranted to be free from defects in material and workmanship under normal use and service. The warranty period is three years and begins on the date of shipment. Parts, product repairs, and services are warranted for 90 days. This warranty extends only to the original buyer or end-user customer of a Fluke authorized reseller, and does not apply to fuses, disposable batteries, or to any product which, in Fluke's opinion, has been misused, altered, neglected, contaminated, or damaged by accident or abnormal conditions of operation or handling. Fluke warrants that software will operate substantially in accordance with its functional specifications for 90 days and that it has been properly recorded on non-defective media. Fluke does not warrant that software will be error free or operate without interruption.

Fluke authorized resellers shall extend this warranty on new and unused products to end-user customers only but have no authority to extend a greater or different warranty on behalf of Fluke. Warranty support is available only if product is purchased through a Fluke authorized sales outlet or Buyer has paid the applicable international price. Fluke reserves the right to invoice Buyer for importation costs of repair/replacement parts when product purchased in one country is submitted for repair in another country.

Fluke's warranty obligation is limited, at Fluke's option, to refund of the purchase price, free of charge repair, or replacement of a defective product which is returned to a Fluke authorized service center within the warranty period.

To obtain warranty service, contact your nearest Fluke authorized service center to obtain return authorization information, then send the product to that service center, with a description of the difficulty, postage and insurance prepaid (FOB Destination). Fluke assumes no risk for damage in transit. Following warranty repair, the product will be returned to Buyer, transportation prepaid (FOB Destination). If Fluke determines that failure was caused by neglect, misuse, contamination, alteration, accident, or abnormal condition of operation or handling, including overvoltage failures caused by use outside the product’s specified rating, or normal wear and tear of mechanical components, Fluke will provide an estimate of repair costs and obtain authorization before commencing the work. Following repair, the product will be returned to the Buyer transportation prepaid and the Buyer will be billed for the repair and return transportation charges (FOB Shipping Point).

THIS WARRANTY IS BUYER'S SOLE AND EXCLUSIVE REMEDY AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. FLUKE SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSSES, INCLUDING LOSS OF DATA, ARISING FROM ANY CAUSE OR THEORY.

Since some countries or states do not allow limitation of the term of an implied warranty, or exclusion or limitation of incidental or consequential damages, the limitations and exclusions of this warranty may not apply to every buyer. If any provision of this Warranty is held invalid or unenforceable by a court or other decision-maker of competent jurisdiction, such holding will not affect the validity or enforceability of any other provision.

Fluke Corporation P.O. Box 9090 Everett, WA 98206-9090 U.S.A.

11/99

Fluke Europe B.V. P.O. Box 1186 5602 BD Eindhoven The Netherlands

Users Manual

154

HART® Calibration Assistant

Introduction

The Fluke 154 HART® Calibration Assistant (the Product) consists of the HART

Wireless technology connects the Modem to the Tablet and App. Wires connect the Modem to a HART field device (the Device). Use the App to configure and calibrate the Device.

The intended user is familiar with the basic functions of wireless devices and mobile technology.

Modem (the Modem) and the Tablet with FlukeHART (the App).

How to Contact Fluke

To contact Fluke:

• Technical Support USA: 1-800-44-FLUKE (1-800-443-5853)

• Repair USA: 1-888-99-FLUKE (1-888-993-5853)

• Canada: 1-800-36-FLUKE (1-800-363-5853)

• Europe: +31 402-675-200

• Japan: +81-3-6714-3114

• Russia: +8-495-664-75-12

• Singapore: +65-6799-5566

• Anywhere in the world: +1-425-446-5500

• Or, visit Fluke's Website at www.fluke.com

• To register your product, visit register.fluke.com

• To register your App, see Use the Product.

• To see, print, or download the latest manual supplement, visit http://us.fluke.com/usen/support/manuals

Users Manual

Safety Information

A Warning identifies hazardous conditions and actions that could cause bodily harm or death. A Caution identifies conditions and actions that could damage the Meter, the equipment under test, or cause permanent loss of data.

Warning

To prevent possible electrical shock, fire, or personal injury:

• Read all safety information before you use the Product.

• Carefully read all instructions.

• Do not alter the Product and use only as specified, or the protection supplied by the Product can be compromised.

•Do not Tap voltages >30 V ac rms, 42 V ac peak, or 60 V dc.

• Do not use the Product around explosive gas, vapor, or in damp or wet environments.

• Do not use the Product if it operates incorrectly.

• Do not use the Product if it is altered or damaged.

• Disable the Product if it is damaged.

• Do not apply more than the rated voltage, between the terminals or between each terminal and earth ground.

• Use only Fluke approved power adapters to charge the battery.

• Disconnect the battery charger and move the Product or battery to a cool, non-flammable location if the rechargeable battery becomes hot

(>50 °C) during the charge period.

• Do not disassemble or crush battery cells and battery packs.

• Batteries contain hazardous chemicals that can cause burns or explode. If exposure to chemicals occurs, clean with water and get medical aid.

• Have an approved technician repair the Product.

Users Manual

Symbols

Table 1 is a list of symbols used on the Product or in this document.

Table 1. Symbols

Symbol Description

















Consult user documentation. WARNING. HAZARDOUS VOLTAGE. Risk of electric shock. WARNING. RISK OF DANGER.

Spent Lithium batteries should be disposed of by a qualified recycler or hazardous materials handler per local regulations. Contact your authorized Fluke Service Center for recycling information.

Certified by CSA Group to North American safety standards. Conforms to European Union directives. Conforms to relevant Australian EMC standards. Conforms to relevant South Korean EMC standards.

This product complies with the WEEE Directive marking requirements. The affixed label indicates that you must not discard this electrical/ electronic product in domestic household waste. Product Category:



With reference to the equipment types in the WEEE Directive Annex this product is classed as category

Instrumentation" product. Do not dispose of this product as unsorted municipal waste.

9 "Monitoring and Control

Unpack the Product

Carefully unpack all items from the box and make sure that you have the items listed in Table 2. After you unpack and inspect the Product, fully charge the Modem and Tablet before use. See Batteries.

Users Manual

Table 2. Standard Accessories

Item Description PN

  

D E F G H

Tablet and Accessories Varies by country

HART Modem 4766133

Carrying Case 4757850

USB Cable for charging Modem 3563901

AC280 Sure Grip Hook Clip, Red 1613782

AC280 Sure Grip Hook Clip, Black 2063165

Fluke-754, Alligator Clip Set, Extended Tooth 3765923

TPAK80 Strap 669960

-- Quick Reference Guide, not pictured 4766015

-- Safety Information, not pictured 4766026

Magnet 669952

Fluke pictured.

154 Users Manual, stored on Tablet, not

Users Manual

Turn on the Product

To turn on the Tablet, push the power button on the side of the Tablet. To register the App:

1. Connect the Tablet to the internet. The information in this step is for a Samsung Galaxy. The steps can be

different based on the Tablet used. For more information, see the manual of the Tablet manufacturer.

a. Tap b. Tap Settings.

If it is not on the main Apps screen, swipe to the side through the Apps screens until Settings is visible.

c. On the left side of the screen, select Wi-Fi. d. On the right side of the screen, select the Internet to connect to.

e. Push (Home) located below the screen on the Tablet. f. Open the Tablet browser to verify the Tablet is connected to the Internet.

g. Push .

2. Tap

3. Tap I Accept on the FlukeHART End User License Agreement (EULA) screen.

4. On the Registration screen:

Apps.

a. Delete the default email address and company name. b. Enter your email address and company name. c. Select the box to get emails when updates are available. d. Review the legal notices.

5. Tap Update Registration.

+ 14 hidden pages