Flir MNTNX1P Installation

MNTNX1P

Pole Mount Adapter

1

Metal Bands 3pcs

2

M8x25 Hex Bolt 4pcs

3

Spring Washer 4pcs
Flat Washer 4pcs

Use a athead screwdriver to loosen
the metal bands (3pcs). Run the
bands through the slots on the pole
mount adapter.

Compatible Products

MNTNV16W
MNTNV16C
MNTNB1XJ
MNTNB1XJW

Visit www.irsecurity.com/pro for the
latest compatibility list

DNZ30TL2R
MNTNZ30C

Pole Mount Adapter 1pcs

Wrap the bands around the pole and
tighten them to secure the pole
mount adapter to the pole.

Make sure to install in an area that
can support the weight of the
camera and accessories.

Mount (not included)

Place 1pcs spring washer and 1pcs at
washer on each M8x25 hex bolt (4pcs).

Attach the mount (not included) to the
pole mount adapter using the M8x25 hex
bolts (4pcs).

Package Contents

Pole Mount Adapter 1pcs

Metal Bands 3pcs

M8x25 Hex Bolt 4pcs
Spring Washer 4pcs
Flat Washer 4pcs

Dimension (units: mm)

84.0

48.0

Φ56.0
Φ100.0
Φ84.0

90.0

119.0

Φ35.0

4-M8 EQU

4-M8 EQU

4-M6 EQU

6-M4 EQU

Weight (pole mount adapter only): 1.0kg / 2.2lbs

170.0

4.0

22.8

130.4

45.0

Φ103~127

www.irsecurity.com/pro
MNTNX1P_INSTALLATION_DIAGRAM_EN_R1