Flir DNR73212, DNR7322, DNR7324, DNR7326, DNR7328 User Manual
Quick Connection Guide
DNR700 Series
4K Network Video Surveillance Recorder
Package Contents:
NVR
Remote Control
Ethernet Cable
USB Mouse
Power Cable
Quick Start Guides
Connecting Your System
IP Cameras* Monitor* Router* Mouse
1
Ethernet Extension Cable*
NOTE: It may take up to
1 minute for cameras to
start up and transmit video
to your NVR.
Recommended:
Connect cameras to NVR
OR
Connect cameras to a PoE switch*
or router* on your network. See
“Adding cameras from the LAN” on
reverse for more details.
2
For the best video output
this NVR can provide,
you must use it with a
monitor that supports 4K
resolution.
3 4 5
Power
!
This system features automatic firmware
upgrades for enhanced functionality. It is
required to upgrade your system to the latest
firmware version.
If a firmware upgrade is available:
1. After startup, a notification will appear
asking you to upgrade the firmware. Click OK to
upgrade.
Need Help?
Visit us online for up-to-date software and
complete instruction manuals
1
2
3
4
Information in this document is subject to change without notice. As our
products are subject to continuous improvement, FLIR Systems, Inc. and
our subsidiaries reserve the right to modify product design, specifications
and prices, without notice and without incurring any obligation.
E&OE © 2016 FLIR Systems, Inc. All rights reserved.
Visit flir.com/security/support
Search for the model number
of your product
Click on your product in the
search results
Click on the Downloads tab
HDMI*
OR
6: ON
16/32 channel configuration shown. 8 channel will have the respective number of video inputs.
For camera compatibility information, visit flir.com/security/support
* Not included / sold separately.
VGA*
2. The system will download and install the
firmware upgrade. Wait for the firmware update
to complete. The system may restart during the
firmware upgrade process.
DO NOT power off or disconnect the power
cable during firmware installation.
DNR700_SERIES_QCG_EN_R1
Quick Connection Guide
DNR700 Series
4K Network Video Surveillance Recorder
Using the Mouse
1. LEFT-CLICK:
• During split-screen display mode:
Click an individual channel to view it
in full-screen. Click again to return to
the split-screen display mode.
1 2
• While navigating menus: Click to
open a menu option.
2. RIGHT-CLICK:
• During live view: Right-click anywhere
on the screen to open the Quick
Menu.
• Within system menus: Right-click to
exit menus.
Adding Cameras from the LAN
Follow the steps below to add cameras that are not directly connected to the Power
over Ethernet (PoE) ports on the back of the NVR.
Setting the Date and Time
It is important to set the correct time to ensure accurate time stamps on
video recordings.
1. In live view, right-click and click Main Menu.
2. Log in using the system user name (default: admin) and password (default:
000000).
3.
Click and
select Setting
4. Click General and select the Date&Time tab.
Enter the current time and
select your time zone, and
click OK.
Check DST to enable auto
Daylight Savings Time
updates.
(Optional) Check NTP to sync
your system with an Internet
time server. Click Manual
Update to instantly update
the time.
Playback and Search
1. From live view, right-click and then click Search.
2. Log in using the system user name (default: admin) and
password (default: 000000).
3. Use the calendar on the right to select the date to
playback.
4. Use the drop-down menus to select the channels you
would like to playback. Click the display options
( ) to playback multiple channels simultaneously.
5. Click inside the video bar to select the playback time.
Playback starts immediately at the selected time.
Select the day
to playback.
Select channels
to playback.
NOTE: Please visit flir.com/security/support for a list of compatible IP cameras.
1. Connect the camera to a router or switch on the same network as the NVR.
2. Right-click and select Device Search. Log in using the admin account (default User
Name: admin; default Password: 000000).
3. Click Device Search.
4. Check the camera(s) you would like to add.
5. Click Add. The Status indicator turns
green to show the camera is successfully
connected.
NOTE: If the Status indicator is red, click .
Update the camera user name, password,
ports, and manufacturer as needed.
6. Click OK to save changes.
5. Click Apply to save changes.
Using the Quick Menu
Right-click to open the Quick Menu.
NOTE: A constant Internet
connection is required to use
NTP.
Select camera/live display view
Control PTZ cameras (not included)
Control Fish Eye cameras (not included)
Control auto focus cameras (not included)
Adjust camera color and image settings
View system information
Start/stop sequence mode
Disable current audible warning
Search and playback recordings
Open manual recording controls
Add IP cameras over the LAN
Open Main Menu
Click inside the
bar to select a
playback time.
DNR700_SERIES_QCG_EN_R1
Loading...