FLIR Digimerge DPV24DLR, Digimerge DPD24DLR Instruction Manual

Vandal Model: DPV24DLR

Indoor Model: DPD24DLR

Ultra Resolution

Day & Night IR Dome Camera

INSTRUCTION MANUAL

Please read this ma nual thoroughly before use and keep it handy for future reference.

Ultra Resolution

Day & Night IR Dome Camera

www.digimerge.com

V1.00

-ii--i-

INTRODUCTION

Features

All Models Feature:

• 1/3” Sony EX-View™ II 960H

• 2.8-12mm Varifocal Day/Night Lens F1.4 DC Iris

• 700+ TV lines of resolution

• Advanced Digital Noise Reduction (DNR)

• Shadow Reduction (ATR)

• Smart-IR Night Vision

• OSD menu control

• Privacy Masking / Motion Detection

• VIDEO OUT(BNC)

• Operates in 12VDC or 24VAC

• Test Monitor Output (RCA)

• 0 Lux with IR LED

DPD24DLR

• Indoor Dome Model

• Camera Mounting: Surface / Semi-Flush Mount

DPV24DLR

• Vandal Dome Model

• Camera Mounting: Surface Mount

General DPD24DL DPV24DL

Power source DC 12V / AC 24V +10%
Power consumption 6.6Watt Max
Minimum Power
Requirement

560mA

Image sensor
Total pixels 976 (H) x 494 (V)
Scanning system 2:1 interlace
Scanning frequency 15.734KHz(H), 59.95Hz(V)
Sync.system Internal / Line Lock
Resolution 700+ TV Lines
Min.illumination 0 Lux IR LED On
Video output 1.0 Vp-p (75 ohm, composite)
S/N Ratio more than 54dB (AGC OFF)
Power input 2-Pin terminal block (Detachable)
Video output BNC Connector (2nd video RCA)
Lens mount Fixed mount
Lens 2.8 - 12mm F1.4 Varifocal DC Auto iris
Operating temperature -10~50°C
Operating humidity 0-90% (non-condensing)

SPECIFICATIONS

-1--iii-

1/3” Sony EX-View™ II 960H

•

IP66 Weatherproof and IK10 Vandal-proof

-3-

PACKING CONTENTS

-2-

Vanda l Dome Di mensi ons B ase hol e posit ions

Ø 0.1"

3.5 mm

3.9"

100.0 mm

3.4"

87 mm

Indo or Dome D imens ions

115 mm

4.5 in

137°

123°

100°

7 mm
.28 in

Unders ide Bas e hole po sitio ns

Indo or Do me Flu sh Mo unt

Fitt ing dime nsion s

3/4’’ -14
NPS thread

4.4"
(112 mm)

5.1"

(130 mm)

112 mm

4.4 in

5.1"

130 mm

39 mm

1.5 in

27 mm

1.1 in

Flush Mount Cutout

and Fitt ing Clearance

MEASUREMENTS

Indoor dome to standard 2S, 4S and Octagon junction
boxes.

Junction Box Fiting plate -------------------------1
2S / 4S plate screws (KM3.5 Type) ------------4

-------------2

Base Fitting Screws PWM3 ----------------------3

JUNCTION BOX PLATE

Screw hol e overv iew

Base Fitti ng
Screw s

88.9 mm

3.5 in

83.3 mm

3.28 in

46.0 mm

1.8 in

Base Fitting

Screw.

Octagon

Screw

2S / 4S

Screw

Indoor Dome package contains the following:

Camera in housing ---------------------------------1
Camera Locking screws (PA3 Type) -----------2
Instruction guide (This Document) -------------1
Surface & Flush Mounting Templates----------2
RCA - BNC test cable ------------------------------1
Junction Box Plate ----------------------------------1
Mounting screw pack ------------------------------1

Vandal Dome package contains the following:

Camera in housing ---------------------------------1
Camera Locking screws (PM4 Type) ---------- 3
Instruction guide (This Document) -------------1
Surface Mounting Template ----------------------1
RCA - BNC test cable ------------------------------1
Junction Box Plate ----------------------------------1
Mounting screw pack ------------------------------1
Tamper allen key ------------------------------------1
Conduit Key ------------------------------------------1

Locking

Screw

Conduit

Key

Allen Key

Mounting Screws Pack.

3pc 70mm / 2.8in Screws

3pc 30mm / 1.2in Screws

3pc 40mm 1.6in plugs

-4-

JUNCTION BOX INSTALLATION TYPES

2S FITTING

a. 2S Fitting requires only 2pcs of 2S/4S screws.

Note: You have a reduced space in which

to hide cables using this type of
installation. Recommended for indoor
dome only.

TWO GANG FITTING

a.

of 2S/4S screws.

Note: A two gang provides the most robust

vandal domes.

4S FITTING

a. 4S Fitting requires 2pcs of 2S/4S screws.

Note:

Suitable for both indoor and vandal domes.

OCTAGON FITTING

a.

Octagon screws.

Note:

are larger compared to those used for
the 2S/4S (M4 type). Suitable for both
indoor and vandal domes

Cable
Entr y

Screws

Cable
Entr y

Screws

Cable

Entr y

Screws

Cable
Entr y

Screws

-5-

VANDAL DOME FITTINGS

Pendant Cap - model # MNTV2XPC

Replaces the need for the camera base.
Compatible with ceiling conduit installations.

Pole Mount - model # MNTV2XP

Junction Box Attachment for
MNTV2XW & MNTV2XC - model # MNTV2XJ

Fits either wall mount and ceiling mount.
Symmetrical design - reversible for top or bottom
conduit.

Corner Mount bracket - model # MNTV2XR

Pendant Mount - model # MNTV2XC

Wall Mount - model # MNTV2XW

Junction Box Mount - model # MNTV2XB

Can fit either MNTV2XW or MNTV2XJ.

Can fit either MNTV2XW or MNTV2XJ.

Mount for either Vandal or Indoor Dome.
Can also mount MNTV2XC or MNTV2XW.