Flir CM-CAPX-63P Installation Guide

Installation Guide

CM-CAPX-63P

Pendant Mount

for Dome Camera

1. Product Overview

Figure 1-1: Physical Dimensions of Pendant Cap

2. Installation and Mounting

2a. Package Contents

Check if everything in the packing box matches to the
order form and the packing slip. All items listed below
should be included in the packing box properly.

·

Pendant mount kit * 1

·

Printed quick guide * 1

·

M4x15L screws * 4

Please contact your dealer if any item missing.

2b. Required Tools

The following tools might help you complete the
installation.

·

Phillips head screw driver

·

T20 torx wrench

·

Wire cutters

3. Specifications

Material

Aluminum

Color

White

Dimensions

204.2mm x 204.2mm x 115mm

Weight

800 g net (Package 1Kg)

2c. Installation and Mounting Procedure

Securely rotate the pendant mount kit

counter-clockwise to be assembled with a
designated applicable pipe after threading the
required cable from pipe to the pendant mount.

Figure 2-1: Assemble Pendant Mount Kit with Pipe

Properly connect the required cable and

assemble the dome camera body with the
pendant mount kit by fastening the 4 M4*15L screws
tightly.

Figure 2-2: Fix camera body with Pendant Mount Kit

Attach the top cover onto the camera body followed by

securing the torx screws within the niches of the top cover.

Figure 2-3: Assemble Top Cover with Camera Body

The complete dome camera along with the pendant

mount kit is eventually mounted onto the designated pipe
application as the following figure shows.

Figure 2-4: Mounting Complete