GETTING STARTED
FLIR MODEL CM55 and MODEL CM57
FLEX CLAMP METERS with Bluetooth®
FLIR CM55_CM57 - GETTING STARTED Document Identifier: CM55_CM57-QS-en-US_AC
CM55_CM57 - GETTING STARTED - EN
USER GUIDE LOCATION: The detailed User Guide is located in the product packaging and on the support.flir.com web
site (download tab). Please read the entire User Guide to gain a thorough understanding of the meter before use.
Register for Extended Warranty and Product Updates at www.flir.com/testwarranty
Quick Overview
Press and hold to power ON or OFF. Install or replace
batteries in rear compartment if meter does not power up.
Meter switches OFF automatically after 10 mins of inactivity.
Current Measurements are covered on the next page.
For the descriptive diagram at right, see the descriptions below:
1. Work Lights
2. Flexible Current Clamp Coil
3. Display
4. INRUSH / REC (Record) button
5. Power / Work Light button
6. RANGE / SEND button
7. HOLD / Start-Stop Record / Bluetooth® button
8. Clamp Lock mechanism
Note: Battery compartment on rear of meter
When powered, press to turn Work Lights ON or OFF.
Press HOLD to freeze displayed readings.
Press RANGE for Manual Ranging (Auto Range is default).
Press INRUSH for inrush current mode (refer to User Guide).
Press and hold REC to record readings at 1 min. intervals.
Press to Start/Stop recording (in REC mode only).
Press and hold
to activate Bluetooth® (real time readings will
now be available to Bluetooth® paired devices).
Press and hold SEND to transmit bulk stored readings via
Bluetooth® (refer to User Guide for in-depth information).
Button Overview
Momentary press to access INRUSH mode
Press and hold to access the Record Memory mode (REC)
Momentary presses step through the ranges manually
Press and hold while in manual range mode to return to Auto range
Press and hold to Send data via Bluetooth® (refer to User Guide for in-depth information)
Momentary press to access the Data Hold mode
Press and hold to activate/deactivate Bluetooth® communication
While in Record mode, momentary press to Pause/Resume recording
Press and hold to switch power ON/OFF
When powered, press to activate/deactivate work lights
Loading...