FlashPoint R1 Quick Start Manual

R1

Radio Receiver

FPRRR1PJR

Thanks for choosing the R1 RECEIVER.
The R1 RECEIVER is a photography lighting
receiver, it serves as a receiver for triggering
wireless strobes.

The R1 RECEIVER features incredible range
and versatility, and should provide you with
years of valuable service. Your satisfaction
means a world to us, we back our products
with a Standard One Year Limited Warranty
to repair or replace your Flashpoint products.

The Standard Limited Warranty does not
cover damages due to personal mishandling,
third-party repair, or inappropriate
disassembly of the products. If you have any
questions about this or any other Flashpoint
product, please contact us at
[e-mail]

Warnings

•

Do not mix old and new batteries

•

Do not subject the radios to impact or abrasion

•

Do not attempt to modify the internal
components

•

Be careful not to bend any antennas

•

Do not use selective color

•

These radios may interfere with other nearby
radio devices, if that is the case, change the
operating channel on all transmitters and
receivers

•

Not intended for underwater use

•

Do not store illegal substances in the battery
compartment

•

Do not hang radios or lights by the cord alone,
ALWAYS use a hanging lanyard/strap if possible

•

Do not use the radio as a remote detonator

Instructions for Use

Insert batteries as indicated inside the battery

1.
compartment

Insert sync cord into strobe, using an adapter

2.
if necessary

Switch on the radio

3.
Make sure the channel switches are in the

4.
same position on the transmitter and receiver

5.

Press the test button on the transmitter to
conrm the signal is working

6.

Keep an eye on the strobe, if the strobe stops
ashing, change the receiver batteries

Remember to switch o the receiver

7.

when it is not in use