Flame Gard FG99-0005 User Manual
PROJECT NAME: _______________________________________
LOCATION: _____________________________________________
1890 Swarthmore Avenue, PO Box 2020, Lakewood, NJ 08701
Phone: 800-526-3694, 732-363-4700, Fax: 732-364-8110
www.amegard.com • www.componenthardware.com
Flame Gard® Fan Access Panel
FG99-0005
SPECIFIER ITEM NO. ____________________QTY: _________
FLAME GARD PART NO. _____________________________________
The affordable solution to re code requirements for cleaning and inspection
of fan blades.
Rugged Weatherproof Construction
• Heavy duty, HNBR rubber bonded to closed cell foam
• Corrosion resistant zinc plated hardware
Easy Installation & Operation
• Fits most commercial fan bases
• Space saving design
• Installs in less than 30 minutes from the outside of the fan
• Retaining spring arms hold panel in place
• Eyebolt facilitates removal
• Provides 4” access opening for inspection and cleaning of fan blades
Code Compliant
• In compliance with requirements of NFPA Standard 96 8.1.1.1 and 8.1.5.3.1
Approximate shipping weight - 1 lb
Lifetime warranty for service life of fan
Ø 5.000
Dimensions shown in inches (mm) are for reference only and are subject to change.
Flame Gard is a registered trademarks of Component Hardware, registered in the US
Specications subject to change without notice © Component Hardware
SPC-FG99-0005 Rev. 11/2012
Loading...