Flame Gard 751717-C User Manual
C US
®
LISTED
HOOD AND DUCT
ACCESSORY
65X3
NFPA #96
®
File No. MH16475
ORDER FORMFOR CURVED ACCESS DOOR PANELS
*The cut out dimension
G should be 70% or less
than the Duct Diameter
A
for proper t.
Wing Screws
B
D
Wing Nuts
Weld Nuts
Reverse view of
Access Frame
PART NO:
DUCT DIAMETER:
QTY:
Additional Notes:
Note: All access panels are custom
manufactured per order and are not
returnable for credit.
E-Clip
Stud in
D
C
Center of Radius
Access Frame
(Mounted on inside of Duct)
Access Panel
Gasket (Permanently
attached to Access Panel)
C
PLEASE ORDER
BY PART NO.
PART NO. A B C* D
750505-C 6.56” 6.75” 5.06” 5.25”
750511-C 6.50” 12.75” 5.00” 11.25”
750517-C 6.50” 18.75” 5.00” 17.25”
750808-C 9.50” 9.75” 8.00” 8.25”
750811-C 9.50” 12.75” 8.00” 11.25”
750817-C 9.50” 18.75” 8.00” 17.25”
750823-C 9.50” 24.75” 8.00” 23.25”
751117-C 12.50" 18.75” 11.00” 17.25”
751123-C 12.50” 24.75” 11.00” 23.25”
751717-C 18.50” 18.75” 17.00” 17.25”
751723-C 18.50” 24.75” 17.00” 23.25”
PANEL
OUTSIDE DIMENSION
HOLE SIZE
Date: P.O. # Account No:
Company Name: Contact Name:
Address: City & State:
Phone No: E-mail:
1890 Swarthmore Avenue, PO Box 2020, Lakewood, NJ 08701 • Tel. 800-526-3694 • 732-363-4700 • Fax 732-364-8110
Component Hardware Group, Inc.
www.flamegardusa.com
Zip:
Loading...