Fishman Model B User Guide
OWNER’S MANUAL
MODEL G
GENERAL PURPOSE PREAMP
MODEL B
ACOUSTIC BASS PREAMP
MODEL G / MODEL B
Thank you for your purchase of a FISHMAN product. Please read these
instructions carefully. If you have any questions or problems, contact our
PRODUCT INFORMATION LINE at 508-988-9665.
The FISHMAN Model G and Model B preamps are specifically designed for
use with piezoelectric pickups. Since piezoelectric pickups require specific
electrical environments, the Model G and Model B feature discrete input
stages that maximize the full potential of piezoelectric pickups.
Both units provide active gain and active boost and cut for Bass and Treble.
The center frequencies of these controls have been selected for their relationship with acoustic instruments.
The tone controls are shelving style. The width of the Bass and Treble separation effectively provides a midrange control; boosting the Bass and Treble
controls will simultaneously provide an effective midrange cut or vice-versa.
The preamp housing is made of rugged aluminum and weighs only seven
ounces. For maximum portability and user convenience, it is equipped with
a heavy duty stainless steel belt clip and four little black rubber feet.
The Model G is designed specifically for acoustic stringed instruments
including guitars, violins, violas, cellos and mandolins.
The Fishman Model B Acoustic Bass Preamp offers the same features as its
general purpose counterpart, but has specially selected frequencies specifically chosen for the acoustic bass and the Fishman BP-100 Bass Pickup.
POWER
APPLICATIONS
Both preamps require a 9 Volt Alkaline battery (not included). To install the
battery, unscrew the four corner screws and remove the back of the case.
Connect a 9 Volt Alkaline battery to the battery clip. Place the battery on the
foam pad inside the preamp. Replace the back of the case and securely fasten the four screws.
2
Loading...