Fishman ELLIPSE MATRIX BLEND USER GUIDE
USER GUIDE
ELLIPSE™ MATRIX BLEND
Quick Start
1. Set the controls • Set Volume off. Set the Blend control to Pickup.
2. Plug in • Connect the Ellipse Matrix Blend to your amplifi er or PA with a ¼-
inch instrument cable.
3. Turn up • Raise the Volume and adjust the Blend control to your liking.
2
Controls
Volume • For the cleanest signal, set the Volume knob as high as possible,
without causing distortion or feedback.
Blend • Move the Blend slider to change the balance between the pickup and
the microphone.
Phase • Use the Phase switch to improve bass response at low volume and
suppress feedback at high volume.
Gooseneck Microphone • This quality electret-condenser cardioid microphone will provide very high-level sound reproduction before feedback when
used in conjunction with the unit’s phase switch.
3
Loading...