Ellipse Blend
™
User’s Guide
User’s Guide
FEATURES
Gooseneck Microphone
This quality electret-condenser cardioid microphone will provide very high-level
sound reproduction before feedback when used in conjunction with the unit’s phase
switch. The microphone’s unique position also prevents leakage from other
instruments and offers complete freedom of movement compared to external stand-
mounted mics.
Volume
Set this as high as possible (without causing your amp or mixer to distort) for the
cleanest signal.
Phase Switch
Push the phase switch in and out until you find the position that sounds best and
subdues feedback.
Blend
Move the Blend slider to change the balance between the pickup and the
microphone. Move the slider left to emphasize microphone. Move it right for more
pickup.
Microphone Positioning
You can position the microphone to find the “sweet spot” inside the instrument. Take
the time to experiment with microphone placement until you find the position that
works best in your instrument.
Ellipse Blend
Ellipse Blend
Description
The Ellipse Blend combines an onboard gooseneck microphone and integrated
blending electronics to augment and enhance Fishman active pickup systems. A
patented non-invasive magnetic mount keeps the unit’s controls easily accessible
and discreetly out of sight.
Onboard controls with no holes!
The Ellipse Blend is an innovative onboard control system for those who do not wish
to put a hole in the side of their guitar. With a profile that is practically invisible, the
crescent-shaped Ellipse Blend fastens inside your guitar’s soundhole. This
convenient location lets you make quick adjustments to volume, phase and
pickup/microphone blend, without missing a beat.
Less Bass More Bass
FEATURES
Gooseneck Microphone
This quality electret-condenser cardioid microphone will provide very high-level
sound reproduction before feedback when used in conjunction with the unit’s phase
switch. The microphone’s unique position also prevents leakage from other
instruments and offers complete freedom of movement compared to external standmounted mics.
Volume
Set this as high as possible (without causing your amp or mixer to distort) for the
cleanest signal.
Phase Switch
Push the phase switch in and out until you find the position that sounds best and
subdues feedback.
Blend
Move the Blend slider to change the balance between the pickup and the
microphone. Move the slider left to emphasize microphone. Move it right for more
pickup.
Microphone Positioning
You can position the microphone to find the “sweet spot” inside the instrument. Take
the time to experiment with microphone placement until you find the position that
works best in your instrument.
User’s Guide
User’s Guide
Less Bass More Bass
Ellipse Blend
Ellipse Blend
Mic Trim
VolumeBlend
Mic Trim
Phase
Microphone Positioning - Continued
Plug in the guitar and move the blend slider to the left for mic only. Start with the mic
capsule so that it faces the back of the guitar. Move the mic closer to the sound hole
for more bass. Turn the capsule toward the sides of the instrument for less bass.
Microphone Trim Control
A small circular potentiometer is recessed below the volume slider and can be
accessed with a small slotted screwdriver. This is a "set it and forget it" control. Use
it to calibrate the microphone balance in relation to the pickup. Set the Blend slider
to the center position and adjust the trim control until both the microphone and pickup
levels are balanced to your liking.
ELECTRICAL SPECIFICATIONS
:
Typical current consumption @ 9Vdc: 2 mA
Typical 9V alkaline battery life: 250 hrs.
Piezo channel input impedance (ohm): 100k
Output impedance (ohm): 1k
Recommended load impedance (ohm): 10k and up
Piezo channel signal gain (blend at piezo, volume at maximum): +3 dB
Piezo channel noise (A-weighted, 22-22kHz, blend at piezo): -106 dBV
Microphone channel signal gain range
(volume at maximum, blend at mic) 0dB to +10dB
Microphone channel low frequency roll off -3dB at 340Hz
Microphone channel noise (A-weighted, 22-22kHz, blend at mic) -103 dBV
All specifications subject to change without notice
www.fishman.com
513-000-009 • Rev A • 4-16-04
Loading...