Fishman AFX REVERB User Manual

AFX • USER GUIDE
ACOUSTIC REVERB PEDAL

clip | batt

off max warm bright short long

level tone decay time

studio

canyon

cathedral

room

concert

plate

chamber

stage

REVERB

ACOUSTIC EFFECTS

2

Quick start

Power – Install a 9V alkaline or lithium battery (not included).

Plug in – Use standard ¼-inch shielded instrument cables.

Set input gain – Play hard and try both normal and boost modes.

The clip/batt LED may fl ash occasionally.

Select an effect – Choose one of the eight reverb presets.

Dial it in – Adjust the level, tone and decay time to taste.

Bypass – Stomp the footswitch to bypass the effect.

3

Using other effects

When using multiple pedals,
we recommend connecting
them in this order, however
feel free to experiment.

clip | batt

off max warm bright short long

level tone decay time

studio

room

concert

plate

stage

chamber

REVERB

ACOUSTIC EFFECTS

canyon

cathedral

clip | batt

off max warm bright slow fast

level tone speed

chorus 1 rotary

chorus 2

phaser

chorus 3

flanger

stereo tremolo narrow tremolo

CHORUS

ACOUSTIC EFFECTS

off max off max min max

level repeats delay time

classic

4

clip | batt

short

medium

long

pong

pong

DELAY

ACOUSTIC EFFECTS

short

medium

long

modern

Right side panel

Input

Plug in with a standard guitar cable to either the left or right input and the
pedal will power on. Or, for stereo operation, connect the outputs from another
stereo effects pedal to both the left and right inputs.

Note: The input for all Fishman AFX pedals is ideal for active pickups and
all soundhole pickups. For passive piezo pickups (no preamp built into the
instrument) we recommend plugging directly into an impedance-matching
preamp fi rst to strengthen the level and maintain proper low frequency content.

rightinputleft

input gain

norm boost

5