Fisher-Price W9235 Instruction Sheet

IMPORTANT SAFETY INSTRUCTIONS - SAVE
THESE INSTRUCTIONS.

CAUTION - ELECTRIC TOY

Not recommended for children under 3 years of age. As with
all electrical products, precautions should be observed during
handling and use to reduce the risk of electric shock.

www.fi sher-price.com

Consumer Information

DANGER

To prevent electric shock, do not immerse

in water; wipe clean with a damp cloth.

IMPORTANT! Before first-time use, charge the 4,8V NiMH rechargeable
battery pack for 5 hours. Charge the 4,8V NiMH rechargeable battery
only with the supplied charger. Do not use any other charger.

• Please read this booklet before first-time use. Keep these instructions
for future reference, as they contain important information.

• Requires a 4,8V NiMH rechargeable battery pack (included) for operation.

• Adult assembly is required.

• Tool required to access battery compartment: flathead screwdriver or
coin (not included)

• The charging station is not a toy. Do not use extension cords with the
charger base.

TM

• iXL

Learning System not included and sold separately.

• Adults Note: Adult supervision is required. Periodically examine this
product for damage to the cord, housing or other parts that may result
in the risk of fire, electric shock or injury. If the product is damaged, do
not use it.

• Even with proper care, the rechargeable battery pack will not last forever.
The life of the rechargeable battery pack depends on how well you follow
these instructions and the total number of hours it is used. If you should
need to replace the rechargeable battery pack, contact Fisher-Price®.

• Do not connect to more than the recommended number of power supplies.

• Do not disassemble the sealed 4,8V NiMH rechargeable battery pack.

• Do not charge a battery pack that shows leakage or corrosion.

• Charger specifications: Input 120 VAC, 60 Hz; Output 9.0 VDC, 600 mA.

One-Time Assembly

• Fit the tabs on the base back into the slots in the charger base. Push to
“snap” in place.

Battery Pack Installation

• Using a slotted screwdriver or coin,
turn the battery compartment fastener
on the side of the iXLTM Handheld Device
(sold separately) to unlock

• Slide the battery compartment door to
remove it.

• Remove the batteries from the
battery compartment.

.

• Pull up on the gray tab.

• While pulling up on the tab, lift the
battery tray.