Fisher-Price 73210 User Manual
Owner’s Manual with Assembly Instructions
Please read this manual and save it with your original sales receipt.
For Model 73210
Tools needed for assembly:Phillips Screwdriver, Hammer and Safety Scissors (not included).
Use only with two Power Wheels®6 Volt Rechargeable Batteries with A-Style Connectors and Built-in Thermal Fuses,
and a Power Wheels®12 Volt Charger (all included).
Requires three “AA” (LR6) alkaline batteries (not included) in Sound Box.
Product features may vary from the picture above.
Harley-Davidson is a registered trademark and the motorcycle sound is a trademark of H-D Michigan, Inc. used under license.
®
2
Table of Contents
Important Information
A Important Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
B Warnings and Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
C Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
D Parts Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
E Battery Charging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
F Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
G Label Decoration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
H Battery Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
I Battery Care and Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
J Car ing For Your Vehicle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
K Rules For Safe Driving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
L How to Operate Your Vehicle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
M Statement of Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
N Problems and Solutions Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
O Authorized Service Centers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
• Your new vehicle requires adult assembly.Please set
aside at least 60 minutes for assembly.
• You must charge your batteries for 18 - 30 hours before
you use your vehicle for the first time. We recommend
that you start charging your batteries before beginning
assembly. Please see Batter y Charging beginning on
page 9 for detailed instructions.
• Read this manual carefully for important safety infor mation and operating instructions before using your vehicle.
Keep this manual for future reference as it contains
important information.
• This vehicle is designed for use on:grass, asphalt and
other hard surfaces; on generally level terrain;and by
children 3 years of age and older.
• Make sure children know and follow these rules for safe
driving and riding:
- always sit on the seat.
- always wear shoes.
- only 1 (one) rider at a time.
• Please note that the front wheel of the vehicle can lift
slightly off the ground during use, especially if the vehicle
is driven forward in high speed from a stopped position.
This is a normal occurrence and is not cause for alarm.
The vehicle will not tip.The rear wheel is designed to act
as a stabilizer by restricting front wheel lift, preventing
the vehicle from tipping.To prevent front wheel lift, teach
your child to start the vehicle in low speed and shift to
high speed only when already moving forward.
• For safety reasons, your vehicle has been pre-set so
that it will operate at low speed. You must connect
the high speed hook-up to allow operation of the
vehicle at high speed. Please see page 28 for
detailed instructions.
A
• To prevent damaging the motors and gears, teach
your child to stop the vehicle before switching direction.
Do not tow anything behind the vehicle or overload it.
Do not exceed the maximum weight capacity of
65 lb (30 kg).
• If you have any questions about your Power Wheels
®
vehicle, please call our toll-free service lines at
1-800-348-0751 from 8 AM to 6 PM (EST) Monday
through Friday.Trained customer service representatives
are available to take your call in English or French.
Habla Español? Si usted tiene alguna pregunta ó necesita
asistencia llame gratis 1-800-348-0755 para los Estados
Unidos.Tenemos representantes que hablan español para
atender su llamada.
• For your convenience, Power Wheels®maintains an
Authorized Service Center Network with more than
400 authorized service centers nationwide. Our authorized
service centers will repair or replace par ts under warranty
at no extra charge, and can perform non-warranty repairs
for a minimal charge.Please see the Authorized Service
Center list beginning on page 32 to find the authorized
service center nearest you, or call 1-800-348-0751.
• Please complete and return the enclosed Registration
Card today, or call 1-800-348-0751 to register your vehicle
by phone, or register on-line at www.powerwheels.com.
3
CA UTION
• In the unassembled state, this package contains small parts. Adult assembly is required.
• Use the charger in dry locations only.
WARNING
• Prevent Injuries and Deaths
• Direct Adult Supervision Required
• Keep Children Within Safe Riding Areas.
These areas must be:
- away from swimming pools and other bodies of water to prevent drownings
- generally level to prevent tipovers
- away from steps, driveways, roads and alleys.
RIDING HAZARD
WARNING
• Batteries can fall out and injure a child if vehicle tips over. Always use battery clamp.
• PREVENT FIRE
- Never modify the electrical system.Alterations could cause a fire resulting in serious
injury and could also ruin the electr ical system.
- Use of the wrong type battery or charger could cause a fire or explosion resulting in
serious injury.
- Use of Power Wheels
®
components in products other than Power Wheels®vehicles
could cause overheating, fire or explosion.
• The battery must be handled by adults only.The batter y is heavy and contains sulfuric
acid (electrolyte). Dropping the battery could result in serious injur y.
• Never allow children to charge the battery. Battery charging must be done by adults only.
A child could be injured by the electricity involved in charging the batter y.
• Never lift or carry the batter y by the wires or connector.This can damage the batter y and
possibly cause a fire resulting in serious injury. Lift and carr y the batter y by the case only.
• Read the safety instructions on the batter y.
• Examine the battery, charger and their connectors for excessive wear or damage each time
you charge the battery. If damage or excessive wear is detected, do not use the charger or
the battery until you have replaced the worn or damaged part.
• HOT motors.Handle carefully.
Warnings and Cautions
B
ELECTRICAL HAZARD
Steering Bushing - 2
Steering Stop
Wheel Axle - 2
Parts
C
Wheel - 2
• If you experience a problem with this product, or are missing a part, please call us at 1-800-348-0751, rather than
return this product to the store.
• Please identify all parts before assembly and save all packaging material until assembly is complete to ensure that no
parts are discarded.
• Metal parts have been coated with a lubricant to protect them during shipment. Wipe all metal parts with a paper towel
to remove any excess lubricant.
T
M
Vehicle Body
Fender
Fork Axle
Left Footboard
Vehicle Frame
4
Exhaust Pipe Set
5
Parts
Saddlebag - 2
Sound Box Fork Cover
Battery Clamp
Gas Tank
Seat
Front Fork
Headlight - Front Half
Headlight - Rear Half
Right - Outer Half
Left - Outer Half
Right - Inner Half
Left - Inner Half
Handgrips - 2
Parts
Shock Set - 2
(Inner Half)
(Outer Half)
Handlebar Set
Left
Right
6
Taillight Cover
Taillight
Fender Tip
Right Mirror Housing
Mirror Lens - 2
Mirror Clamp - 2
Left Mirror Housing
6 Volt Battery - 2
Hex Bushing - 4
Round Bushing - 2
Not Shown: Label Sheet
12 V olt Charger
W
A
R
N
I
N
G
P
R
E
V
E
N
T
F
I
R
E
•
D
o
n
o
t
b
y
p
a
s
s
a
P
o
w
e
r
W
h
e
e
l
•
U
s
e
o
n
l
y
a
R
e
d
P
o
w
e
r
W
h
e
e
l
s
•
N
e
v
e
r
m
o
d
i
f
y
t
h
e
e
l
e
c
t
r
i
c
a
l
O
R
O
P
E
R
A
T
E
7
Axle Bushing - 2
Parts
All Shown Actual Size
.354 (Small Diameter) Cap Nut - 2*
.437 (Large Diameter) Cap Nut - 4*
*For your convenience, two extra .437 (large diameter) cap nuts and
one extra .354 (small diameter) cap nut are included.
#8 x 3/4" Screw – 63
#8 x 1/2" Screw – 5
T
M
Parts Diagram
D
8
1. Vehicle Frame
2. Vehicle Body
3. Seat
4. Wheel - 2
5. Gas Tank
6. Left Footboard
7. Exhaust - Inner Half - 2
8. Exhaust - Outer Half - 2
9. 6 Volt Battery - 2
10. Axle Bushing - 2
11. Hex Bushing - 4
12. Wheel Axle - 2
13. Saddlebag - 2
14. Steering Bushing - 2
15 Headlight - Front Half
16. Headlight - Rear Half
17. Handlebar - 2
18. Sound Box
19. Front Fork
20. Handgrip - 2
21. Round Bushing - 2
22. Steering Stop
23. Fork Axle
24. Fork Cover
25. Fender
26. Shock - Inner Half - 2
27. Shock - Outer Half - 2
28. 12 V olt Charger
29. .354 Cap Nut - 2
30. .437 Cap Nut - 4
31. Battery Clamp
32. Fender Tip
33. Left Mirror Housing
34. Mirror Clamp - 2
35. Taillight
36. Taillight Cover
37. Mirror Lens
Not Shown
#8 x 3/4" Screw - 63
#8 x 1/2" Screw - 5
Label Sheet
5
2
28
3
16
19
17
13
23
6
12
7
8
1
21
27
12
22
29
15
4
20
24
14
29
18
31
9
26
30
14
4
32
25
11
33
34
35
36
10
30
11
37
Note: Some parts shown are assembled
on both sides of the vehicle.
Battery Charging
E
Important Notes
• Your new batteries must be charged for at least
18 hours before you use them in your vehicle for
the first time.
• We recommend that you start charging your batteries
before beginning assembly of your new vehicle.
• The batteries must be upright while charging.
• The charger is not a toy.
• Do not short circuit the batteries.
• You do not need to remove the batteries from your
vehicle to recharge them.
• Before charging the batteries, examine the batter y cases
for cracks and other damage which may cause sulfuric
acid (electrolyte) to leak during the charging process. If
damage is detected, do not charge the batteries or use
them in your vehicle.Batter y acid is very corrosive and
can cause severe damage to surfaces it contacts.
• Do not charge the battery on a surface which could be
damaged by the acid contained inside the battery. Take
precautions to protect the surface on which you charge
your batteries.
• Use only a Power Wheels®12 volt charger with
A-style connector (120 VAC 60 Hz 28W with an output of
12 VDC 1200mA) to charge your Power Wheels
®
6 volt batteries.
• When replacing the 6 volt batteries, use only Power
Wheels®6 volt batteries with A-style connectors and
built-in thermal fuses. Power Wheels®6 volt batteries
with external thermal fuses will not fit in the battery
compartment of this vehicle.
About Thermal Fuses
Your Power Wheels 6 volt batteries are equipped with
built-in thermal fuses.The ther mal fuses are self-resetting
safety devices which automatically “trip” and shut down
operation of the vehicle if the vehicle is overloaded or the
driving conditions too severe.Once a fuse has “tripped”,
it will automatically reset itself after approximately 25
seconds and allow the vehicle to resume normal
operations.To avoid repeated automatic shutdowns,
do not overload the vehicle by exceeding the 65 lbs.
maximum weight capacity or by towing anything behind
the vehicle.Avoid severe driving conditions, such as
driving up slopes or running into fixed objects, which
can cause the wheels to stop spinning while power is still
being supplied to the motors and make sure your child
stops the vehicle before switching speeds or direction.
If a thermal fuse in a battery continually trips under
normal driving conditions, please contact your local Power
Wheels®Authorized Service Center.For the location of the
Authorized Service Center nearest to you, see page 32,
or visit www.powerwheels.com.
9
CA UTION
Use the charger in dry locations only.
WARNING
• Batteries can fall out and injure a
child if vehicle tips over. Always use
battery clamp.
• PREVENT FIRE
- Never modify the electrical system.
Alterations could cause a fire resulting
in serious injury and could also r uin the
electrical system.
- Use of the wrong type battery or
charger could cause a fire or explosion
resulting in serious injury.
- Use of Power Wheels
®
components in
products other than Power Wheels
®
vehicles could cause overheating,
fire or explosion.
• The battery must be handled by adults
only.The battery is heavy and contains
sulfuric acid (electrolyte). Dropping the
battery could result in serious injur y.
• Never allow children to charge the battery.
Battery charging must be done by adults
only. A child could be injured by the
electricity involved in charging the battery.
• Never lift or carry the batter y by the wires
or connector.This can damage the batter y
and possibly cause a fire resulting in
serious injury.Lift and carry the batter y
by the case only.
• Read the safety instructions on
the battery.
• Examine the battery, charger and their
connectors for excessive wear or damage
each time you charge the battery. If
damage or excessive wear is detected, do
not use the charger or the battery until you
have replaced the worn or damaged part.
ELECTRICAL HAZARD
Battery Charging
10
W
A
R
N
I
N
G
P
R
E
V
E
N
T
F
I
R
E
•
D
o
n
o
t
b
y
p
a
s
s
a
P
o
w
e
r
W
h
e
e
l
•
U
s
e
o
n
l
y
a
R
e
d
P
o
w
e
r
W
h
e
e
l
s
•
N
e
v
e
r
m
o
d
i
f
y
t
h
e
e
l
e
c
t
r
i
c
a
l
O
R
O
P
E
R
A
T
E
W
A
R
N
I
N
G
P
R
E
V
E
N
T
F
I
R
E
•
D
o
n
o
t
b
y
p
a
s
s
a
P
o
w
e
r
W
h
e
e
l
•
U
s
e
o
n
l
y
a
R
e
d
P
o
w
e
r
W
h
e
e
l
s
•
N
e
v
e
r
m
o
d
i
f
y
t
h
e
e
l
e
c
t
r
i
c
a
l
O
R
O
P
E
R
A
T
E
1
• Align the ribs on the top of one of the battery
connectors with the slots on the bottom of the other
battery connector.
• Stack the two battery connectors and press to join.
Note: Make sure that the two connectors on the charger
are also stacked and joined.
Ribs
Slots
Battery Connector
Battery
Connector
A-Style
Battery Connector
2
• Plug the charger and battery connectors together.
Push firmly to snap the two connectors together.
Incorrect
Correct
A-Style
Charger
Connector
GAP
NO GAP
• Plug the charger into a standard 120 volt wall outlet.
Note: If power flow to the wall outlet is controlled by a
switch, make sure the switch is “ON”.
• Before first time use, charge the batteries for
at least 18 hours. Never charge the batteries longer
than 30 hours.
• Recharge the batteries for at least 14 hours after
each use of your vehicle.Do not charge the batteries
longer than 30 hours.
• Once the batteries are charged, disconnect the charger
connector from the battery connector.Unplug the
charger from the wall outlet.The batteries are now
charged and are ready to be installed in your vehicle.
Please see the Battery Installation section on page 24
for detailed instructions on installing your battery.
3
W
A
R
N
I
N
G
P
R
E
V
E
N
T
F
I
R
E
•
D
o
n
o
t
b
y
p
a
s
s
a
P
o
w
e
r
W
h
e
e
l
•
U
s
e
o
n
l
y
a
R
e
d
P
o
w
e
r
W
h
e
e
l
s
•
N
e
v
e
r
m
o
d
i
f
y
t
h
e
e
l
e
c
t
r
i
c
a
l
O
R
O
P
E
R
A
T
E
W
A
R
N
I
N
G
P
R
E
V
E
N
T
F
I
R
E
•
D
o
n
o
t
b
y
p
a
s
s
a
P
o
w
e
r
W
h
e
e
l
•
U
s
e
o
n
l
y
a
R
e
d
P
o
w
e
r
W
h
e
e
l
s
•
N
e
v
e
r
m
o
d
i
f
y
t
h
e
e
l
e
c
t
r
ic
a
l
O
R
O
P
E
R
A
T
E
W
A
R
N
I
N
G
P
R
E
V
E
N
T
F
I
R
E
•
D
o
n
o
t
b
y
p
a
s
s
a
P
o
w
e
r
W
h
e
e
l
•
U
s
e
o
n
l
y
a
R
e
d
P
o
w
e
r
W
h
e
e
l
s
•
N
e
v
e
r
m
o
d
i
f
y
t
h
e
e
l
e
c
t
r
i
c
a
l
O
R
O
P
E
R
A
T
E
W
A
R
N
I
N
G
P
R
E
V
E
N
T
F
I
R
E
•
D
o
n
o
t
b
y
p
a
s
s
a
P
o
w
e
r
W
h
e
e
•
l
U
s
e
o
n
l
y
a
R
e
d
P
o
w
e
r
W
h
e
e
l
s
•
N
e
v
e
r
m
o
d
i
f
y
t
h
e
e
l
e
c
t
r
i
c
a
l
O
R
O
P
E
R
A
T
E
Assembly
T
M
3
• Pull firmly to separate the two black motor harness
connectors near the rear of the vehicle frame.
• Position the vehicle body on top of the vehicle frame.
• Fit each motor harness connector up through the
rectangular opening in the vehicle body, one at a time.
• Fit the two halves of the high speed hook-up con-
nector through the square opening near the front of the
vehicle body.
1
• Position the taillight cover with the inside arrow
pointing upward.
• Fit the taillight cover on the back of the taillight.
• Insert two #8 x 1/2" screws through the holes in the
taillight cover. Tighten the screws with a Phillips
screwdriver. Do not over-tighten.
2
• Position the vehicle body upside down on a flat surface.
• Fit the taillight on the outside of the rear fender as
shown. Make sure the holes in the rear fender and
taillight are aligned.
Square
Opening
High Speed Hook-Up
Taillight
Cover
Taillight
Motor
Harness
Connectors
Vehicle Frame
Rear of
Vehicle
Vehicle
Body
Rectangular
Opening
Vehicle Body
Taillight
#8 x 1/2" Screw
#8 x 3/4" Screw
#8 x 3/4" Screw
F
Children can be harmed by small parts, shar p edges and shar p points
in the vehicle’s unassembled state, or by electrical items. Care should
be taken in unpacking and assembly of the vehicle. Children should not
handle parts, including the batter y, or help in assembly of the vehicle.
WARNING
• Insert one #8 x 1/
2" screw through the hole near the end
of the fender in the vehicle body and into the taillight.
• Insert two #8 x
3
/
4" screws through the remaining holes
in the vehicle body and into the taillight.
• Tighten the screws with a Phillips screwdriver.
Do not over-tighten.
11
Loading...