Fisher & Paykel WODV230N Dimension Guide
DATUM : FRONT OF CARCASS
48 1/2''
29 1/16''
1 9/16''
22 /8''
4 /4''
4 5/16''
41 /4''
22 7/16''
21 15/16''
20 /8''
1 1/16''
1''
47 15/16"
20 7/8''
28 5/16''
28''
2 /8''
48 /16''
28 1/2''
22 5/8''
28 5/16"
o
DATA SHEET
0" Professional Double Wall Oven
Model no:
WODV2-30
(refer page 2 for metric measurements)
D
22 3/8"
C
n
PLAN VIEW
DATUM : FRONT OF CARCASS
C
29 13/16"
B
q
l
Product Dimensions in
A Overall height of oven
B Overall width of oven
C Depth of oven front and control panel (excludes handle
anddials)
D Depth of oven chassis (does not include oven front)
E Height from bottom datum to bottom of control panel
F Height from bottom datum to top of top door
G Height from bottom datum to centre of top handle
H Height from bottom datum to bottom of top door
I Height from bottom datum to top of bottom door
J Height from bottom datum to centre of bottom handle
K Height from bottom datum to top of vent
L Thickness of handles
M Height of chassis
N Depth of door (open) (measured from front of door)
O Overall width of chassis
P Width of handle
Q Depth of handle (measured from front of door)
DATUM : BOTTOM OF PRODUCT
0 5 10 20
inches
Minimum Clearances in
Minimum inside height of cavity from bottom datum
Minimum inside width of cavity
A
48 1/2"
m
Minimum inside depth of cavity from front datum
KJIpHGFE
INDICATES PRODUCT DATUM -------------------------------------------
INDICATES CLEARANCES ------------------------------------------------
FRONT VIEW
Dn
PROFILE VIEW
DATE: 24.04.2018
IMPORTANT: Throughout this guide, dimensions may vary by ±2mm (1/16'').
Read the installation guide for detailed information on installing the product.
For full installation instructions and specifications visit fisherpaykel.com
DATUM : FRONT OF CARCASS
122
757
9
569
1112
1100
1061
570
557
518
27
26
1218
50
720
711
60
1224
724
720
o
DATA SHEET
0" Professional Double Wall Oven
Model no:
WODV2-30
(refer page 1 for imperial measurements)
D
569
C
p
PLAN VIEW
n
DATUM : FRONT OF CARCASS
C
757
B
q
l
Product Dimensions mm
A Overall height of oven
B Overall width of oven
C Depth of oven front and control panel (excludes handle
anddials)
D Depth of oven chassis (does not include oven front)
E Height from bottom datum to bottom of control panel
F Height from bottom datum to top of top door
G Height from bottom datum to centre of top handle
H Height from bottom datum to bottom of top door
I Height from bottom datum to top of bottom door
J Height from bottom datum to centre of bottom handle
K Height from bottom datum to top of vent
L Thickness of handles
M Height of chassis
N Depth of door (open) (measured from front of door)
O Overall width of chassis
P Width of handle
Q Depth of handle (measured from front of door)
DATUM : BOTTOM OF PRODUCT
0 100 200 400
HGFE
millimetres
Minimum Clearances mm
Minimum inside height of cavity from bottom datum
Minimum inside width of cavity
A
1232
Minimum inside depth of cavity from front datum
m
575
KJI
INDICATES PRODUCT DATUM -------------------------------------------
INDICATES CLEARANCES ------------------------------------------------
D
DATE: 24.04.2018
IMPORTANT: Throughout this guide, dimensions may vary by ±2mm (1/16'').
Read the installation guide for detailed information on installing the product.
For full installation instructions and specifications visit fisherpaykel.com
FRONT VIEW
n
PROFILE VIEW
Loading...