Fisher & Paykel RD90U Installation Guide

ACTIVESMART™ INTEGRATED

SLIDE-IN REFRIGERATOR

RS90A & RS90AU models

INSTALLATION GUIDE

NZ AU GB IE HK SG IN

844219A 07.18

CONTENTS

FOLLOW THE INSTALLATION SEQUENCE RELEVANT TO YOUR CABINETRY

1 SAFETY AND WARNINGS

2 COMPONENTS LIST

3 PRODUCT AND CAVITY DIMENSIONS

4 DOOR PANEL DIMENSIONS

5 CUSTOM DOOR PANEL INSTALLATION DIMENSIONS

6

 DOOR OPENING ROTATION

7

 ELECTRICAL AND PLUMBING

8

 BEFORE INSTALLATION

9

 ATTACH ANTI-TIP BRACKET

!0 REMOVE HINGE END CAPS

!1 CONNECT TO WATER AND ELECTRICAL SUPPLY

!2 ALIGN YOUR PRODUCT INSIDE THE CABINETRY

!3 ASSEMBLE THE DOOR PANEL SET

!4 HANG THE DOOR PANELS

!5 FIX THE BRACKETS AND RE-INSTALL THE END HINGE CAPS

!6 INSTALL WATER FILTER AND TOE KICK GRILLE

!7 ATTACH COVERS AND DOOR/DRAWER TRIMS

!8 ATTACH CABINET SIDE TRIMS

!9 FINAL CHECKLIST

1

1 SAFETY AND WARNINGS

!

WARNING!

Electric Shock Hazard
Read and follow the safety and warnings outlined in this installation
guide before operating this appliance.
Failure to do so can result in death, electric shock, fire or injury
topersons.

!

WARNING!

Cut Hazard
Take care – panel edges are sharp. Failure to use caution could result
ininjury or cuts.

!

WARNING!

This appliance is top-heavy and must be secured to prevent the
possibility of tippingforward.

To ensure that the appliance is stable under all loading conditions,
theanti-tip bracket and fittings supplied must be installed according
tothe following installation instructions by a professional installer.

IMPORTANT!



The water connection to your Ice & water refrigerator must be installed by an
authorised plumber or Fisher & Paykel trained and supported service technician
andcomply with all state and local laws.



Installation and use MUST comply with all state and local plumbing codes. Checkwith
your local public works department for plumbing codes. You must follow their
guidelines as you install the water filtration system.



To avoid serious illness or death, only connect your water filter to safe drinking water.



The water filter cartridge needs to be changed when the replacement indicator icon
illuminates. This will happen every 6 months.



If the water filtration system has been allowed to freeze, replace filter cartridge.
Failure to replace the disposable filter at recommended intervals may lead to
reduced filter performance and failure of the filter, causing property damage from
water leakage or flooding.



In cases of excessively reduced filter life — we recommend that you consult a local
plumber or your water supplier for advice on suitable filtration requirements for the
water supplied to your home.



Filter replacement is the consumer’s responsibility and will not be covered by the
warranty except in the case of faulty parts or materials within the filter cartridge.



If the water has not created ice for some time or ice has an unpleasant taste or odour
dispose of ice and refer to the flushing instructions detailed in the installation section
of this user guide/installation guide. If unpleasant taste or odor persists, you may
wish to fit a new filter cartridge.



Use new tubing supplied with the refrigerator. DO NOT reuse old tubing from old
water and ice connections.



Your water filtration system can withstand up to 827kPa of water pressure. Ensurethe
supplied pressure reducing valve is installed before installing the water filtration
system. DO NOT install if water pressure exceeds 827kPa.

To reduce the risk associated with property damage due to water leakage or flooding:



DO NOT install systems in areas where ambient temperatures may go above 38°C or
drop below 0.6°C.



DO NOT install on hot water supply lines. The maximum operating water temperature
of this filter system is 38°C.



DO NOT install where water hammer conditions may occur. If water hammer
conditions exist, you must install a water hammer arrester.

WARNING!

To reduce the risk associated with choking:



DO NOT allow children under 3 years of age to have access to small parts during the
installation of the water filter.

IMPORTANT!

SAVE THESE INSTRUCTIONS

The models shown in this installation guide may not be available in all markets and are subject to change at any time. For current details about model and specification availability in your country,
go to our website fisherpaykel.com or contact your local Fisher & Paykel dealer.

3

2 COMPONENTS LIST

MI (miscellaneous items) pack — included with the refrigerator

ACTIVESMART™

INTEGRATED REFRIGERATOR

RS90A, RS9120W,

RS36A72, RS36A80 & RS36W80 models

USER GUIDE

NZ AU GB IE HK SG IN US

SERVICE & WARRANTY

SERVICE ET GARANTIE

ΣΈΡΒΙΣ ΚΑΙ ΕΓΓΎΗΣΗ

SERVIZIO E GARANZIA

SERVICE & GARANTIE

HUOLTO JA TAKUU

SERVICE OG GARANTI

保修和维修

服務和保修

ACTIVESMART™ INTEGRATED

SLIDE-IN REFRIGERATOR

RS90A & RS90AU models

INSTALLATION GUIDE

NZ AU GB IE HK SG IN

844219A 07.18

User guide (1x) Service & Warranty (1x) Installation guide (1x)

Anti-tip bracket fittings — included with the refrigerator

Anti-tip bracket (1x) #10x40 pan head

Masonry plug (4x)

Phillips screw (4x)

Water filter install kit — included with the refrigerator

Product accessories — included with the refrigerator

Toe kick filter (1x) Toe kick grille (1x) Power cord clip (1x)

Cabinet side trim

Side cover (4x) Top cover (2x)

bracket (6x)

Door side trim (2x) Drawer top trim (1x) Drawer side trim (2x)

Water filter (1x) Collet locking clip (1x) Filter cartridge tool (1x)

External display module
(1x) (included with Water
dispensing models)

Water tap adaptor 1/4”
ODx1/2” BSP thread
(1x)

1/4” (6mm) tube (1x)

4

3M Dual Lock™ tabs
(10x)

Wood screw (2x)

#8x16 panhead
Philips screw (34x)

Cabinet side trim (2x)

2 COMPONENTS LIST

Door panel set

Fisher & Paykel
(Stainless steel)
door panel set is
not included with
the refrigerator
and must be
purchased
separately.

Door panel set:

Non-Water dispensing French panel (1x)
Ice & Water French panel (1x)
Drawer panel (1x)

Custom door panel set
is only applicable for
non-Water dispensing
models. Customers
can supply their own
Custom door panel to
match their cabinetry.

Door panel set:

Non-Water dispensing French panels (2x)
Drawer panel (1x)

Door panel fittings — included with the refrigerator

French door hanging
bracket (2x)

Side strap (10x) Side bracket (10x) Handle screw (12x) Top stud (6x)

Side cover (4x) Top cover (2x) M8 washer (6x) M8 nut (6x)

Drawer hanging
bracket (1x)

Side screw (10x) Screw washer

4x14 (34x)

Model number:

RD90 / RD90U

Door handle kit — not included with the refrigerator and must be purchased separately

Professional round door handle (3x)

M5x25 pan head socket screw (12x) M5x14 Mush Phillips SS (34x)

OR

Contemporary square handle (3x)

5

F

E

G

f

d

c

B

F

F

E

G

G

IMPORTANT!

For ease of installation, ensure cavity width is consistent
top to bottom and height isconsistent left to right.

3 PRODUCT AND CAVITY DIMENSIONS

c

d

PRODUCT DIMENSIONS

Overall height of product* 1798

A

Overall width of product 896

b

Overall depth of product (without door panels) 606

c

* Includes mounted feet

RS90A model shown with RD90 door panels

6

a

b

e

FRONT VIEW PROFILE VIEW

f

RS90A / RS90AU

d

mm

Flush with
front of
cabinetry

TOP VIEW

Note: shown with Standard Fisher & Paykel door

panels (Stainless steel) attached to fridge

RS90A / RS90AU

CAVITY DIMENSIONS mm

Overall height of cavity 1800

D

Overall width of cavity 900 / 904**

E

Overall depth of cavity 650

F

Minimum cabinetry gap clearance from edge of product 4

g

** Cavity width when adjoining cabinetry cannot share 4mm door gap,

1 Total front panel width with required gaps at sides = 904mm (B product width + 2 x g cabinetry gaps).

2 For flush cabinet situation where the gap cannot be shared between the fridge and adjoining cabinet,

makethecavity width 904mm and open totally within itself.

3 Total front panel height with required gap above = 1802mm.

4 DOOR PANEL DIMENSIONS

D

g

A

E

e

g

c b

f

j

A

d

h

A

B

C

D

A

i

PROFILE VIEWFRONT VIEW

STAINLESS STEEL/CUSTOM

DOOR PANEL DIMENSIONS mm

Height of each top door panel 1096

A

Width of each top door panel 446

B

Gap between top door panels 4

C

Height of bottom drawer panel 598

D

Height from bottom of product to top of bottom drawer panel 698

E

Width of bottom drawer panel 896

F

Gap between top door panels and bottom drawer panel 4

G

Depth of each door panel (without handle) 18

H

Depth of grille (measured from front of door panels) 100

i

Height of grille 100

j

Custom door panels and handles to be manufactured and fitted by cabinetmaker.

H

g

F

Custom door panels can be only be used for non-Water
dispensing models.

D

7