Fisher Paykel RB36S25MKIWN1 Planning Guide
25 /16"
11/16"
21 15/16"
6 1/16" –
7 1/4"
25"
1 11/16"
1 /4"
20 1/2"
in
26 /16"
4"
22 1/16"
/16"
2 15/16"
DATUM : FRONT OF CARCASS
B
PLAN VIEW
33 11/16"
B
H
C
21 15/16"
DATUM : FRONT OF CARCASS
DATUM : FRONT OF CARCASS
G
DATA SHEET
36" CoolDrawer™
Model no:
RB36S25MKIW1
(refer page for metric measurements)
Product Dimensions in
A Overall height* of CoolDrawer™*
B Overall width* of CoolDrawer™
C Depth of CoolDrawer™ chassis (includes power terminal)
D Height from bottom datum to bottom of drawer front*
E Height from bottom datum to top of drawer front*
F Width of internal drawer front*
G Depth of internal drawer front*
H Depth of drawer (open) measured from front datum*
* Does not include the custom door panel or handle to be manufactured
andfitted by cabinetmaker
NOTE: Height of custom panel drawer and false panels can vary depending
ondoor positioning and adjustment
Minimum Clearances
Minimum inside height of cavity from bottom datum**
Minimum inside width of cabinetry
Minimum inside depth of cavity from front datum
Minimum gap between drawer panel to top of custom false panel
Minimum height of toe kick
DATUM : BOTTOM OF CARCASS
DE
0 5 10 20
inches
F
FRONT VIEW
A
25 3/16"
* Minimum internal height of cabinetry can be 25 /16" if outlet duct is not used.
Refer to installation guide for details
A
H
INDICATES PRODUCT DATUM -------------------------------------------
C
PROFILE VIEW
INDICATES CABINETRY CLEARANCES --------------------------------
DATE: 01.06.2018
IMPORTANT: Throughout this guide, dimensions may vary by ±2mm (1/16'').
Read the installation guide for detailed information on installing the product.
For full installation instructions and specifications visit fisherpaykel.com
DATA SHEET
min
18 /4"
5 1/4"
5/8"
– 1/16"
/16"
5 15/16"
– 7 1/16"
min
5 1/4"
5/8"
– 1/16"
15 pounds
in
2 15/16"
1 9/16"
36" CoolDrawer™
Model no:
RB36S25MKIW1
(refer page 4 for metric measurements)
Custom Panel Dimensions in
A Height of custom drawer panel
B Width of custom drawer panel
C Depth of custom drawer panel
D Gap between panels
E Height of custom false panel
F Width of custom false panel
C
G Depth of custom false panel
B
A
G
D
A
E
H
Maximum weight of drawer panel**
Minimum Clearances
H Minimum height of toe kick
I Minimum depth of toe kick (not including custom panels)
Custom false panel, drawer panel and handles to be manufactured and fitted
by cabinetmaker. These panels must be adequately sealed towithstand
moisture (92F @ 80% RH)
** Includes weight of handle
F
E
I
ISO VIEW PROFILE VIEW
DATE: 01.06.2018
IMPORTANT: Throughout this guide, dimensions may vary by ±2mm (1/16'').
Read the installation guide for detailed information on installing the product.
For full installation instructions and specifications visit fisherpaykel.com
Loading...